• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Applied Biological Chemistry
• /
• v.19 no.3
• /
• pp.139-144
• /
• 1976

In order to investigate the properties of enzymes from two strains of mold, reported in the previous paper, (1) studies have been made concerning the characteristics of cellulase of Aspergillus niger-SM6 and Trichoderma viride-SM10, and summarized as follows. 1. In the semi-purification the recovery of ${\beta}-glucosidase$ was the highest when 80-90% ethanol was used and 0.8 saturation of $(NH_4)_2SO_4$. 2. The characteristics of the semi-purified enzyme were as follows. Aspergillus niger-SM6 Trichoderma viride-SM10 Optimum pH 3.5 4.0 pH stability 3.0-6.0 3.0-6.0 Optimum temperature $60^{\circ}C$ $60^{\circ}C$ Heat stability below $60^{\circ}C$ below $50^{\circ}C$ Optimum reaction time 30 min. 60 min. Optimum CMC concentration 3% 3% 3. The Km values of CMCase were 0.8% and 1.01 for Aspergillus niger-SM6 and Trichoderma viride-SM10, respectively. 4. In the strain of Aspergillus niger-SM6, there were high activity of xylanase and pectinase.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.223-227
• /
• 2006

Optimal heat treatment conditions for maintaining the immune-activity of immunized milk with Helicobacter pylori antigen were studied Total bacterial count of immunized milk with H. pylori antigen decreased according to the increasing heating temperature and time. The viable tell number of immunized milk was $10^3\;CFU/mL$ after heat treatment for 30 min at $60^{\circ}C$, and coliform bacteria did not appear in immunized milk after heat treatment Immune-activity measured in terms of IgG concentration was maintained up to 99.99% after heat treatment for 30min at $60^{\circ}C$, but decreased rapidly below 50% after heat treatment above $70^{\circ}C$. The quality characteristics of immunized milk were examined during storage at $2^{\circ}C,\;4^{\circ}C\;and\;10^{\circ}C$. The pH, titratable acidity and total bacterial count were not changed significantly during 21 day storage at $2^{\circ}C\;and\;4^{\circ}C$, but rapidly changed after 7 day storage at $10^{\circ}C$. The immune-activity was kept well for 14 day storage at $2^{\circ}C,\;4^{\circ}C\;and\;10^{\circ}C$ but decreased rapidly after 14 days at every temperatures tested.

• Clean Technology
• /
• v.20 no.4
• /
• pp.415-424
• /
• 2014

In this study, two kinds of polymer (PPQX-2hdPTZ (P1), POPQX-2hdPTZ (P2)) were synthesised by Suzuki coupling reaction based on phenothiazine derivative as electron-donor and quinoxaline derivative as electron-acceptor. Microwave synthesis workstation was used to shorten the polymerization time and increase the degree of polymerization. The physical, thermal stability, optical and electrochemical properties of the synthesized polymer were confirmed. The thermal stability of two polymers was outstanding as the initial decomposition temperature was $323-328^{\circ}C$. And additional substituted alkoxy chain on P2 showed higher degree of polymerization. An analysis of electrochemical properties, all polymer had similar HOMO energy level values. Device was fabricated by ITO/PEDOT:PSS/active layer/$BaF_2$/Al structure and photovoltaic properties were confirmed. Each device has a different film thickness and the resulting change in PCE was confirmed. As a result the thinner thickness of the film showed a high efficiency ($PCE_{max}:P1=1.0%$, P2 = 1.1%).

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.629-633
• /
• 2006

Pinus rigida Miller leaf extract (PRLE) showed antimicrobial activity remarkably against food pathogenic and spoilage bacteria at concentrations of $100{\sim}250{\mu}g/mL$. Alcohol-soluble PRLE had higher antimicrobial activity against Staphylococcus aureus and E-coli than any other-soluble PRLE such as butanol, ethyl acetate, ether and water. As PRLE concentration increased alcohol-soluble PRLE increased the remarkable inhibitory zone of microbial growth on the microbial media. PRLE showed good stability against temperature and pH in the range of $40{\sim}150^{\circ}C$ and $4{\sim}11$, respectively. This may indicate that PRLE can be a potential anti-microbial agent for industrial application. In addition, SEM of Listeria monocytogenes suggested that it antimicrobial component would perturb the functions of microbial cell membranes synergistically. In the feeding experiment the formaldehyde content in the serum of formalin-fed and PRLE-treated me decreased remarkably due to the lysis of formaldehyde and the rate of hemoglobin biosynthesis was recovered to the orignal state within a short breeding time.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.333-337
• /
• 1996

For continuous production of galactooligosaccharides(GOS), $\beta-galactosidase$ with h1gh transgalactosylation activity from Bacillus sp. A 4442 was Immobilized onto $Diaion^{TM}$ HPA 75(styrene-divinylbenzene resin). The parameters influencing enzyme immobilization were scrutinized in order to maximize immobilization yield while minimizing enzyme inactivation. The optimum conditions turned out to be: Tris buffer concentration 30 mM, pH 8.0, contact time at room temperature 3 hr, and enzyme loading 25 mg protein/g resin. Both the thermal stability and the operational stability of immobilized enzyme were markedly enchanced by the treatment with 0.5% glutaraldehyde as a cross-linker. Under the experimental conditions established, the yield of ${\beta}-galactosidase$ immobilization was 40% or more and the activity of the immobilized enzyme ca. 200 U/g resin. When a packed-bed reactor was employed to continuously convert lactose to GOS, the specific production, which refers to as the amount of commercially valuable GOS produced by a unit amount of immobilized ${\beta}-galactosidase$, was found to be ca. 300 g GOS/g carrier.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.187-201
• /
• 1996

This study was to evaluate the efficiency of diffusive monitor using activated carbon fiber(ACF, KF-1500) in measuring airborne organic solvents. The following characteristics were identified and studied as critical to the performance of diffusive monitor; recovery, sampling rate, face velocity, reverse diffusion and storage stability. For the evaluation of the performance of this monitor, MIBK, PCE, toluene were used as organic solvents. In the sampling rate experiments, eight kinds of solvents (n-hexane, MEK, DIBK, MCF, TCE, CB, xylene, cumene) as well as the above solvents were used. The results were as follows: 1. The desorption efficiencies(DE's) of ACF diffusive monitor ranged from 83 % to 101 %. In contrast, those of coconut shell charcoal ranged from 78 % to 102 %. Especially, the DE's of ACF for the polar solvents such as MEK were superior to those of charcoal. 2. Experimental sampling rates on ACF were average 42ml/min(37-46ml/min) for 11 organic solvents at $24{\pm}2^{\circ}C$, $50{\pm}5%RH$. However ideal sampling rates(DA/L) were 33 % higher than experimental sampling rates. 3. The initial response(15~16 min) of the testing monitor was 2 times higher than the actual concentration determined by the reference methods at $24{\pm}2^{\circ}C$, $8{\pm}5%RH$ and $80{\pm}5%RH$. Within 1 hours, the curve reached a linear horizontal line at low humidity condition. But sampling efficiencies decreased with respect to time at high humidity condition. And sampling efficiencies were higher at high humidity condition than low humidity condition for MIBK. 4. At very low velocity (less than 0.02 m/sec), the concentration of ACF diffusive monitor were poorly estimated. But ACF diffusive monitor were not affected at higher velocity(0.2 m/sec-0.6 m/sec). 5. There was no significant reverse diffusion when the ACF monitors were exposed to clean air for 2 hours after being exposed for 2 hours at the level of 1 TLV. 6. There was no significant sample loss during 3 weeks of storage at room temperature and 5 weeks of storage at refrigeration.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.313-320
• /
• 2010

New cinnamate group-containing copolymers for a self-curable, humidity-sensitive polyelectrolyte and polymeric anchoring agents were prepared by copolymerization of [2-[(methacryloyloxy) ethyl]dimethyl]propyl ammonium bromide(MEPAB), methyl methacrylate(MMA), 3-(trimethoxysilyl) propyl methacrylate(TMSPM) and 2-(cinnamoyloxy)ethyl methacrylate(CEMA). Photocrosslinkable copolymer composed of MEPAB/MMA/TMSPM/CEMA＝70/20/0/10 were used for humidity-sensitive membrane, and those of 50/0/20/30 and 0/0/50/50 were used for polymeric anchoring agents. 3- (Triethoxysilyl)propyl cinnamate(TESPC) was also used as a surface-pretreating agent for the comparison of capability of attachment of polyelectrolyte to the electrode surface with polymeric photocurable silanecoupling agents. Pretreatment of the electrode substrate with anchoring agents was performed to form a cinnamate thin film on the electrode through covalent bonds. When the sensors were irradiated with UV light, the anchoring of a polyelectrolyte into the substrate was carried out via the [2$\pi$+2$\pi$] cycloaddition. The resulting sensors using polymeric anchoring agents and TESPC showed water durability with increase of resistance by 60~85%, which is corresponding to the reduction of 2.25~3.15%RH, after soaking in water for 24 h. They showed good hysteresis (-0.2%RH), response time (90 sec) and long-term stability at high temperature and humidity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.39-46
• /
• 2022

In this study, we tried to find out the value of using Vietnamese Ternstroemia kwangtungensis Merr. (TK) extracts as a functional material. As a result of measuring the level of Nrf2 expression of TK, 50% ethanol extract TK leaf showed the highest activity at a concentration of 200 ㎍/mL. In order to confirm the stability of the extract over time at room temperature, UPLC was performed, and stability was maintained because the patterns of the UV spectrum pattern were the same. In order to confirm the antioxidant efficacy of TK, the activity increased as the concentration increased as a result of measuring electron donating and ABTS⁺ radical scavenging ability. At 1,000 ㎍/mL, they showed effects of 94.6% and 90.8%, respectively. As a result of measuring the tyrosinase inhibitory activity showed an inhibitory ability of 24.4% at a concentration of 1,000 ㎍/mL. In addition, as a result of examining the elastase inhibitory activity of the extract was increased in a concentration-dependent manner, and it was confirmed that the inhibitory activity was 42.7% at 1,000 ㎍/mL. From these results, it was confirmed that the TK extract was valuable as a natural material for cosmetics.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.75-84
• /
• 2010

In this study, the long-term performance tests, which have extensibility, creep deformation, installation resistance and durability characteristic, is conducted to apply geosynthetic strip in field. The strength reduction factors using the test results are evaluated in order to calculate long-term design tensile strength. First, the creep deformation was evaluated by both the stepped isothermal method(SIM) and the time-temperature superposition(TTS) method. The creep reduction factor is reasonable to apply 1.6. Second, the result of installation damage test had little damage of yarn, which affected strength of reinforcement. Therefore, it can be analyzed that the installation damage of geosynthetic strip has little effect of long-term design tensile strength. Finally, the durability reduction factor considering chemical, biological and outdoor exposure resistance is reasonable to apply 1.1, which is considered the stability and economic efficiency of reinforced earth wall using geosynthetic strip.