• 한국환경과학회지
• /
• 제14권9호
• /
• pp.851-860
• /
• 2005

In order to how well predict ISCST3(lndustrial Source Complex Short Term version 3) model dispersion of air pollutant at point source, sensitivity was analysed necessary parameters change. ISCST3 model is Gaussian plume model. Model calculation was performed with change of the wind speed, atmospheric stability and mixing height while the wind direction and ambient temperature are fixed. Fixed factors are wind direction as the south wind(l80") and temperature as 298 K(25 "C). Model's sensitivity is analyzed as wind speed, atmospheric stability and mixing height change. Data of stack are input by inner diameter of 2m, stack height of 30m, emission temperature of 40 "C, outlet velocity of 10m/s. On the whole, main factor which affects in atmospheric dispersion is wind speed and atmospheric stability at ISCST3 model. However it is effect of atmospheric stability rather than effect of distance downwind. Factor that exert big influence in determining point of maximum concentration is wind speed. Meanwhile, influence of mixing height is a little or almost not.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.191-198
• /
• 2009

We have tested the stability of paeoniflorin, a new cosmetic ingredient, extracted from the roots of Paeoniae lactiflora. The stability of aqueous paeoniflorin solution at pH 3, 5 and 7 varied by adding buffer solution was tested at $0^{\circ}C,\;25^{\circ}C,\;40^{\circ}C,\;and\;65^{\circ}C$. The test was performed with or without UV light. The solution of paeoniflorin was stable at pH 3.0, however, the recovery rate of paeoniflorin was 40% at pH 7.0. The stability of paeoniflorin solution was decreased as the pH of paeoniflorin solution was increased by pH 7.0. The effect of storage temperature of paeoniflorin solution shows that the stability of paeoniflorin solution was decreased as the temperature was increased. The stability of paeoniflorin was rather good under UV light than the condition given above $40^{\circ}C$. The stability of paeoniflorin in W/O emulsions shows similar pattern to that of aqueous solution.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.37-42
• /
• 1999

The stability of high-temperature superconducting current leads for cryogenic devices are investigated. By assuming full transition from superconducting state to normal state at a transition temperature, the HTS current at a transition temperature, the HTS current lead shows bifurcation phenomenon. There is a bifurcation shape-factor, HTS leads have three steady state. Below the bifurcation shape-factor, the superconducting current lead is unconditionally stable, because there exists only one steady-factor HTS current lead is conditionally stable depending on the shape and intensity of disturbance.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.351-364
• /
• 2009

The thermal stability and elevated temperature mechanical properties of $SiC_P$/Al-11.7Fe-1.3V-1.7Si (Al-11.7Fe-1.3V-1.7Si reinforced with SiC particulates) composites sheets prepared by spray deposition (SD) $\rightarrow$ hot pressing $\rightarrow$ rolling process were investigated. The experimental results showed that the composite possessed high ${\sigma}_b$ (elevated temperature tensile strength), for instance, ${\sigma}_b$ was 315.8 MPa, which was tested at $315^{\circ}C$, meanwhile the figure was 232.6 MPa tested at $400^{\circ}C$, and the elongations were 2.5% and 1.4%, respectively. Furthermore, the composite sheets exhibited excellent thermal stability: the hardness showed no significant decline after annealing at $550^{\circ}C$ for 200 h or at $600^{\circ}C$ for 10 h. The good elevated temperature mechanical properties and excellent thermal stability should mainly be attributed to the formation of spherical ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase particulates in the aluminum matrix. Furthermore, the addition of SiC particles into the alloy is another important factor, which the following properties are responsible for. The resultant Si of the reaction between Al matrix and SiC particles diffused into Al matrix can stabilize ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase; in addition, the interface (Si layer) improved the wettability of Al/$SiC_P$, hence, elevated the bonding between them. Furthermore, the fine $Al_4C_3$ phase also strengthened the matrix as a dispersion-strengthened phase. Meanwhile, load is transferred from Al matrix to SiC particles, which increased the cooling rate of the melt droplets and improved the solution strengthening and dispersion strengthening.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.244-252
• /
• 2002

The electrical and dielectric behavior fort DC accelerated aging stress of P $r_{6}$ $O_{11}$-based Zno varistors cnsisting of ZnO-P $r_{6}$ $O_{11}$-CoO-C $r_2$ $O_3$-E $r_2$ $O_3$ were investigated with sintering temperature in the range of 1325~1345$^{\circ}C$. The varistor ceramics with increasing sintering temperature were more densified. A more densified varistors leaded to high stability for DC accelerated aging stress. Furthermore, the stability for DC accelerated aging stress was increased with the leakage current and dtan $\delta$/dV decreasing in order of 1325longrightarrow1335longrightarrow1345longrightarrow134$0^{\circ}C$ in sintering temperature. It was found that the stability for DC stress is affected more greatly by the leakage current and dtan $\delta$/dV than the densification. It is considered that the stability of varistors for DC stress can be estimated by considering the factors, such as the densification, leakage current, and dtan $\delta$/dV. As a result, the varistor sintered at 134$0^{\circ}C$ exhibited the highest stability, with %$\Delta$ $V_{lmA}$=-1.54%, %$\Delta$$\alpha$=-2.49%, %$\Delta$ $I_{\ell}$=+240.68%, 5%$\Delta$tan$\delta$=+29.96%.96%.96%.%.

• 한국식품과학회지
• /
• 제29권3호
• /
• pp.407-411
• /
• 1997

가열시간과 저장온도가 가열팜유의 산화안정성에 미치는 영향을 연구하였다. 팜유는 $150^{\circ}C$에서 0, 1, 10 또는 20분동안 가열된 후 4, 20 또는 $65^{\circ}C$에 넣어 저장하였다. 시료의 산화안정성은 저장중인 시료의 과산화물가와 시료의 headspace에서의 휘발성 물질의 양을 측정함으로써 평가되었다. 4 또는 $20^{\circ}C$에 저장한 가열팜유와 $65^{\circ}C$에 저장한 팜유는 과산화물과 휘발성물질 생성에 유의적인 차이를 나타내었다(p<0.05). Pentane, hexanal, heptane과 total volatile은 가열시간이 증가함에 따라 많이 생성되었으나 저장온도는 유의적으로 그 생성에 영향을 미치지 못하였다. 이것은 가열팜유의 휘발성 물질의 생성에는 저장온도보다 가열시간이 더욱 중요한 역할을 수행함을 의미한다. 그러나 과산화물 생성에는 반대 결과가 관찰되었다. 또한 가열팜유의 산화안정성에 대한 가열시간과 저장온도의 상호효과도 관찰되었다.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.90-96
• /
• 2005

The improvement of combustion stability is very important because it is closely related to the exhaust emission concentrations as well as the fuel consumption during the cold start of SI engine. In our previous studies, the spark and exhaust valve timings were retarded individually from the baseline case to increase the exhaust gas temperature far fast warmup of a close-coupled catalyst. In the study, it was found that combustion stability during cold start becomes worse when the valve timing is retarded from the baseline conditions. The spark and valve timings were simultaneously changed from the baseline conditions to find out the variation of combustion stability during cold start of an Sl engine. Through the study. retarded spark timing by $5^{\circ}$ CA helps improvement of $COV_{imep}$ by $2\%$ and $15^{\circ}C$ increase of exhaust temperature. Retarded exhaust valve timing makes the exhaust gas temperature increase by $30^{\circ}C$, but it also deteriorates the $COV_{imep}$ by $1\%$.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.445-451
• /
• 2022

Ultrasonic sensor is suitable as a next-generation autonomous driving assist device because its lower price compared to that of other sensors and its sensing stability in the external environment. Although Pb(Zr, Ti)O₃ (PZT)-relaxor ferroelectric system has excellent piezoelectric properties, the change in capacitance is large in the daily operating temperature range due to the low phase transition temperature. Recently, many studies have been conducted to improve the temperature stability of ferroelectric ceramics by controlling the grain size and crystal structure, so it is necessary to study the effect of the grain size on the piezoelectric properties and the temperature stability of PZT-relaxor ferroelectric system. In this study, the piezoelectric properties, phase transition temperature, and temperature coefficient of capacitance (TCC) of 0.9 Pb(Zr_1-xTi_x)O₃-0.1 Pb(Zn_1/3Nb_2/3)O₃ (PZT_x-PZN) ceramics with various grain sizes were investigated. PZT_x-PZN ceramics with larger grain size showed higher piezoelectric properties and temperature stability, and are expected to be suitable for ultrasonic devices in the future.

• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.235-238
• /
• 2003

We investigated the effect of the phase transition temperature (T$_{c}$) of phospholipid in liposomes on the stability of incorporated retinol. Two kinds of phospholipid which have different T$_{c}$, L- $\alpha$ -dimyristoyl phosphatidyl choline (DMPC, T$_{c}$=22$^{\circ}$C) and D,L- $\alpha$ -dipalmitoyl phosphatidyl choline (DPPC, T$_{c}$=42$^{\circ}$), were used to prepare liposomes. Liposome with retinol was prepared as multilamella vesicles (MLVs) by the dehydration/rehydration method. The incorporation efficiency of retinol into liposomes prepared from DMPC and DPPC were 99.89$\pm$0.08% and 99.97$\pm$0.03, respectively. The average size of liposomes from DPPC were greater than that of DMPC. Two kinds of liposomes in phosphate buffer (10 mM, pH 7.0) were stored at 15, 30, and 5$0^{\circ}C$, and stability of incorporated retinol was analyzed. The stability of retinol in DMPC liposome was decreased, whereas the stability in DPPC liposome was increased as temperature increased, although the overall protection effect of liposome on the incorporated retinol was greater in DMPC liposomes than in DPPC liposomes.posomes.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.297-303
• /
• 1998

The effect of aliovalent dopants, $ Nb_2O_5$ and MnO, on the phase stability of 12 mol% ceria partially-stabilized zirconia (Ce-TZP) polycrystals was studied. Both dopants (MnO and $ Nb_2O_5$) significantly increased the stability of the tetragonal zirconia phase (Mb temperature lower than liquid nitrogen temperature). The enhancement of the stability of the tetragonal phase in Ce-TZP doped with 1 mol% of Mno(Ce-TZP/MnO) andCe-TZP doped with 1 mol% of $ Nb_2O_5$(Ce-TZP/$ Nb_2O_5$) were explained by the significant reduction of the driving force, -${\Delta}$Gchem, for the tetragonal-to-mono-clinic phase transformation caused by the addition of MnO and $ Nb_2O_5$. The enhanced stability of the tetragonal phase in the Ce-TZP and Al2O3 composite (Ce-TZP/$Al_2O_3$) is believed to be caused by smaller grain size, moderate reduction in the chemical driving force and increase in the strain energy barrier to the transformation. Mechanical properties of the Ce-TZP and the Ce-TZP/$Al_2O_3$ with (i) the same grain size and (ii) the same Mb temperature were examined by measuring stress-strain behavior in 3 point bending. The Ce-TZP/$Al_2O_3$ composite doped with 1.3w% MnO (Ce-TZP/$Al_2O_3$/MnO), which had the same grain size as the Ce-TZP and De-TZP/$Al_2O_3$ showed more transformation plasticity than either the Ce-TZP or the Ce-TZP/$Al_2O_3$ composite. The Ce-TZP wihch had the same Mb temperature as that of the Ce-TZP/$Al_2O_3$/MnO did not show any transformation plasticity.