• 한국안전학회지
• /
• 제11권1호
• /
• pp.75-83
• /
• 1996

This paper was concerned with pool fire about many used kerosene and diesel oil. In order to know the thermal effects of kerosene and diesel oil, temperature change in the pool fire of these fuels were obtained as a variation of combustion time and the tank's height and diameter by using the data acquisition system, And fuel combustion velocity were derived as a function of the diameter and wall thickness of tanks and combustion time. As a result, when the tank's height was 15㎝, the greater diameter the higher temperature rising regardless of tank's wall thickness and fuels. But, when the tank's height is 30㎝, temperature rising was not higher than 15㎝. Also, temperature rising in the pool fire of kerosene much higher than diesel oil. Kerosene's combustion velocity was about two times faster than diesel oil. And, kerosene's combustion velocity was increased according to the increasing of tank's diameter and combustion time. But, diesel oil's combustion velocity was a little increased or not. Surrounding temperature change of tank with the pool fire was obtained temperature distribution of 0∼35℃ according to the change of tank's diameter and distance from the tank's wall.

• 환경생물
• /
• 제40권3호
• /
• pp.352-362
• /
• 2022

우리나라 동해와 남해 연안에 주로 분포하는 게바다말의 수온 상승에 따른 탄소수지 변화를 예측하기 위하여 5℃에서 30℃까지의 수온에서 5℃ 간격으로 광합성과 호흡률을 측정하였다. 광합성 매개변수 중 광합성 효율(α)을 제외한 최대광합성률(P_max)과 보상광도(I_c), 포화광도(I_k)가 수온이 상승함에 따라 증가하였으며, 호흡률(R) 또한 수온 상승에 따라 증가하였다. 가장 높은 수온(30℃)에서 P_max와 I_k는 급격히 감소하였으나, 반면에 I_c와 호흡률은 지속적으로 증가하였다. P_max :R ratio는 가장 높은 수온(30℃)에서 최소값을, 가장 낮은 수온(5℃)에서 최대값을 보였다. 이러한 결과를 토대로 게바다말이 양의 탄소수지를 유지하기 위해 필요한 일일 포화광도 시간(H_sat)을 계산한 결과, 5℃에서는 2.50시간 이상, 30℃에서는 10.61시간 이상이 요구되어, 수온이 상승할수록 더 많은 시간의 포화광도(H_sat)가 요구되는 것으로 나타났다. 따라서 수온이 꾸준히 상승되어 여름철 고수온이 장기간 지속되면 우리 연안 게바다말 생육지의 분포에 부정적인 영향을 미칠 것으로 판단되었다.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.207-215
• /
• 2019

The aim of the research is analyzing the simple adiabatic temperature rising properties and the heat of hydration based on different placing timing of the mass concrete depending on various replacing ratios of blast furnace slag to comparative analyze the thermal cracking index and cracking possibility. As a result from the experiment, a suggested adiabatic temperature rising equation based on various blast furnace slag replacing ratios can be provide favorable correlation with over 0.99 of $R^2$ value by applying the initial induction period. With this relationship, more accurate prediction of the amount of the hydration heat rising and heating timing, and it is known that there is an approximately $13.1^{\circ}C$ of gap between plain concrete without blast furnace slag and concrete with 80 % of replacing blast furnace slag. To control the setting time and heat rising gap, the mix designs between top and bottom concrete casts were changed 15 cases, and D, E, H, I, and L models of controlling the heat of hydration showed 41.23 to $46.88^{\circ}C$ of core temperature and 0.98 to 1.27 of thermal cracking index. Therefore the cracking possibility was 15 to 52 % of favorable results of possibly controlling both the cracking due to the internal and external retainment and concrete temperature at early age.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.479-484
• /
• 2003

In this paper, film thickness and temperature distribution are measured in EHL point contact at high slip ratios. Infrared temperature mapping with two band pass fillers. proposed by Ausherman (1976). is used to measure temperature distribution. And the optical interferornetric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, slip ratio and load increased, size of Dimple and temperature rising became more large In addition, Position and shape of Dimple we changed by slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.144-149
• /
• 2013

This work deals with the optimal design of a coreless PMLSM (Permanent Magnet Linear Synchronous Motor) with consideration of rising winding temperature. The temperature distribution caused by copper loss in the coreless PMLSM was analyzed using a FEM (Finite Element Method). The thrust and current density where the winding temperature reaches the allowable temperature were calculated. The optimal model provides maximum thrust per unit weight.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.49-54
• /
• 2011

Now the world will regulate the CO2 emission due to environmental issues. For an alternative plan photovoltaic system is watched. So, photovoltaic system is trend of big city and it is mandatory for renovation of construction. Oil & gas filling station existed in city is suitable to found the photovoltaic system. But the general photovoltaic system in oil & gas filling station is difficult to found because it is classified into hazardous area. This paper evaluates intrinsic safety evaluation of solar cell for making basic data to found for the photovoltaic system on hazardous area. The intrinsic safety characteristic is evaluated by short-circuit ignition test using IEC type spark ignition test apparatus and temperature rising test. The result of short-circuit ignition test, propane-air mixture gas is exploded on condition that 4 solar cells(9[V], 90[mA]) are connected serially under insolation 800[W/$m^2$]. So, if a larger solar module will be used at oil & gas filling station than we were tested, it needs explosion proof. As the result of rising temperature test, the temperature rising due to short circuit is not so much, but when the temperature rises due to radiant heat, it demands careful consideration for environmental influence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.305-310
• /
• 2003

Recently, gypsum boards are widely used as interior finishing boards for constructions because of their features of absorbing heats and little temperature rising at the early stage of fire. Therefore, in this research, basic data were suggested to secure fireproof stability by investigating interior processing features, which change together with the backside temperature of test materials from Flash Over (within 30 minutes after firing), at which temperature reaches its highest point, to survey the features of materials due to rising temperature in the chase of gypsum boards (general and fireproof gypsum boards)

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.147-154
• /
• 2018

The purpose of this article is analyzing the impacts of seawater surface temperature rise on sea mustard yields of Goheung and Wando coast in Korea, with employing a panel data regression model. Our results show that there has been a negative impacts on sea mustard yields as seawater surface temperature continuously has been rising. Especially if the upward trend in seawater surface temperature since 2005 will be maintained in future, sea mustard yield is expected to decrease by 2.6% per year.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.114-115
• /
• 2021

The research team conducted a series of studies to use CGS as fine aggregate for concrete. In this paper, through the adiabatic temperature rising test, CGS' hydration heating performance and its usability as a mass concrete hydration heating agent were reviewed. According to the analysis, the maximum temperature of the mix of OPC 100 was 53.7℃, and the temperature of CGS 50% was 45.2℃, which was 8.5℃ lower than the OPC 100.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.707-714
• /
• 2003

플라즈마 아크 광중합기 (Plasma Arc Curing units)는 상대적으로 높은 광강도를 발생시켜 짧은 중합시간으로 복합레진이 충분한 중합강도에 도달할 수 있게 해준다. 시술시간의 단축이라는 점에서 소아치과에서는 최근에 플라즈마 아크 광중합기를 많이 사용하고 있으나, 플라즈마 아크 광중합기는 광조사 동안 많은 열을 발생시킬 수 있다. 본 연구에서는 2종류의 플라즈마 아크 광중합기(Flipo, Q-Lux plasma 100)를 이용하여 여러 두께의 상아질 시편과 중합된 복합레진 시편을 통해 전달되는 온도를 측정하고 비교하였다. 본 연구의 결과는 다음과 같다. 1. 플라즈마 아크 광중합기를 연속적으로 조사하였을 때, 중합기의 조사단에서 측정된 온도는 조사시간이 증가함에 따라 증가하였고, Q-lux에서 Flipo보다 더 큰 온도 증가를 보였다(p<.0.001). 2. 상아질 시편의 두께에 따른 온도 변화에서, 상아질 시편의 두께가 증가함에 따라 온도 증가량은 감소되었다(p<0.05). 3. 복합레진 시편의 두께에 따른 온도 변화에서, 복합레진 시편의 두께가 증가함에 따라 온도 증가량은 감소되었다(p<0.05).