• 수산해양기술연구
• /
• 제20권1호
• /
• pp.1-5
• /
• 1984

고기가 자망에 이망될 숙건하에 그물면에 작용하는 붕어(Carassius carassius)의 유영력을 시험수조에서 strain gauge를 써서 즉정한 결과는 다음과 같다. 1. 순간최대유영력 및 지속최대유영력과의 체중과의 관계는 F 하(M) =1.45W, F 하(s) =0.29W 이다. 2. 순관최대유영력 및 지속최대유영력과의 체중과의 관계는 F 하(M) =0.11L 상(2.63), F 하(S) =0.15L 상(1.77)이다. 3. 붕어의 유체저항계수는 C 하(s) ≒0.287이다.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.468-476
• /
• 2022

Yttria-stabilized zirconia (YSZ) has a low thermal conductivity, high thermal expansion coefficient, and excellent mechanical properties; thus, it is used as a thermal barrier coating material for gas turbines. However, during long-time exposure of YSZ to temperatures of 1200℃ or higher, a phase transformation accompanied by a volume change occurs, causing the YSZ coating layer to peel off. To solve this problem, YSZ has been doped with trivalent and tetravalent oxides to obtain coating materials with low thermal conductivity and suppressed phase transformation of zirconia. In this study, YSZ is doped with trivalent oxides, Nd₂O₃, Yb₂O₃, Al₂O₃, and tetravalent oxide, TiO₂, and the thermal conductivity of the obtained materials is analyzed according to the composition; furthermore, the relative density change, microstructure change, and m-phase formation behavior are analyzed during long-time heat treatment at high temperatures.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.328-331
• /
• 2012

With the recent development of super-precision optical instruments, camera modules for devices, such as portable terminals and digital camera lenses, are increasingly being used. Since an optical lens is usually produced by high-temperature compression molding methods using tungsten carbide (WC) alloy molding cores, it is necessary to develop and study technology for super-precision processing of molding cores and coatings for the core surface. In this study, Rhenium-Iridium (Re-Ir) thin films were deposited onto a WC molding core using a sputtering system. The Re-Ir thin films were prepared by a multi-target sputtering technique, using iridium, rhenium, and chromium as the sources. Argon and nitrogen were introduced through an inlet into the chamber to be the plasma and reactive gases. The Re-Ir thin films were prepared with targets having a composition ratio of 30 : 70, and the Re-Ir thin films were formed with a 240 nm thickness. Re-Ir thin films on WC molding core were analyzed by scanning electron microscope (SEM), atomic force microscope (AFM), and Ra (the arithmetical average surface roughness). Also, adhesion strength and coefficient friction of Re-Ir thin films were examined. The Re-Ir coating technique has received intensive attention in the coating processes field because of promising features, such as hardness, high elasticity, abrasion resistance and mechanical stability that result from the process. Re-Ir coating technique has also been applied widely in industrial and biomedical applications. In this study, WC molding core was manufactured, using high-performance precision machining and the effects of the Re-Ir coating on the surface roughness.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.271-274
• /
• 2013

Power Metal Oxide Semiconductor Field Effect Transistor's (MOSFETs) are well known for superior switching speed, and they require very little gate drive power because of the insulated gate. In these respects, power MOSFETs approach the characteristics of an "ideal switch". The main drawback is on-resistance RDS(on) and its strong positive temperature coefficient. While this process has been driven by market place competition with operating parameters determined by products, manufacturing technology innovations that have not necessarily followed such a consistent path have enabled it. This treatise briefly examines metal oxide semiconductor (MOS) device characteristics and elucidates important future issues which semiconductor technologists face as they attempt to continue the rate of progress to the identified terminus of the technology shrink path in about 2020. We could find at the electrical property as variation p base dose. Ultimately, its ON state voltage drop was enhanced also shrink chip size. To obtain an optimized parameter and design, we have simulated over 500 V Field ring using 8 Field rings. Field ring width was $3{\mu}m$ and P base dose was $1e15cm^2$. Also the numerical multiple $2.52cm^2$ was obtained which indicates the doping limit of the original device. We have simulated diffusion condition was split from $1,150^{\circ}C$ to $1,200^{\circ}C$. And then $1,150^{\circ}C$ diffusion time was best condition for break down voltage.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.426-434
• /
• 2008

고밀도 유도결합 플라즈마 장치의 $SiH_4/O_2/Ar$방전에 대한 공간 평균 시뮬레이터를 제작하였다. 제작된 시뮬레이터는 $SiH_4/O_2/Ar$ 플라즈마 방전에서 발생되는 전자, 양이온, 음이온, 중성종, 그리고 활성종들에 대해 공간 평균한 유체 방정식을 기반으로 하고 있으며, 전자가열 모델은 anomalous skin effect를 고려한 파워 흡수 모델을 적용하여 전자가 흡수하는 고주파 파워량을 결정하였다. 완성된 시뮬레이터에서 RF-파워와 압력 변화에 대한 하전입자, 중성종, 활성종들의 밀도 변화 및 전자 온도 의존성을 계산하였다.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.344-350
• /
• 2004

탄소 섬유강화 에폭시기지 복합재의 경면 가공한 스테인리스강 상대재와 마찰과 마모에 바탕을 둔 연구에서는 다음과 같은 결론을 얻었다. (1) 복합재의 비마모율은 하중이 증가하면 N방향와 P방향에서는 증가하는 경향을 보이며,AP방향에서는 감소한다. 이것은 마모 메카니즘의 영향으로 속도가 증가하면 마모 이착막의 생성이 빨라져 이착막 속의 탄소섬유가 윤활제의 역할을 하기 때문이다. (2) 복합재의 마찰계수는 하중이 증가하면 N방향과 AP방향에서는 하중 39.2N까지 증가하다가 그 이상의 하중에서는 감소되며 AP방향에서는 하중이 증가함에 따라 서서히 증가하며, 또한 그 값은 N방향에서 가장 크고, AP방향이 가장 적다. (3) 일방향 탄소섬유 강화 복합재의 마모 거동에 미치는 하중의 효과는 다르며 마찰초반에 발생한 섬유에 의한 쟁기질과 섬유 굽힘 및 미소크랙에 의한 섬유 균열과 파괴에 따른 마모 메카니즘의 형태에 의한 것이다.

• 센서학회지
• /
• 제12권3호
• /
• pp.103-111
• /
• 2003

$Si_3N_4/SiO_2/Si_3N_4$ 열차단막을 이용한 크로멜-알루멜(chromel-alumel) 열전(thermoelectric) 유량센서를 제작하였다. 백금 박막 히터의 저항온도계수는 약 $0.00397/^{\circ}C$이었고, 크로멜-알루멜 열전쌍(thermocouple)의 Seebeck 계수는 약 $36\;{\mu}V/K$이었다. 기체의 열전도도가 증가할수록 유량센서가 나타내는 열기전력은 감소하였으며, 히터의 온도가 증가하거나 히터와 열전쌍 사이의 간격이 감소할수록 유량센서의 $N_2$ 유량에 대한 감도는 증가하였다. 히터 전압을 약 2.5 V로 하였을 때 유량센서의 $N_2$ 유량에 대한 감도는 약 $1.5\;mV/sccm^{1/2}$이었고, 열 응답시간은 약 0.18초이었다. 크로멜-알루멜 열전 유량센서의 유량감도에 있어서 선형 범위가 Bi-Sb 유랑센서의 것보다 더 넓게 나타났다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.45.1-45.1
• /
• 2011

Cobalt-free $La_xSr_{4-x}Fe_6O_{13}$ ($0{\leq}x{\leq}2$) oxide have been synthesized and investigated as a potential cathode material for solid oxide fuel cells (SOFCs). $Sr_4Fe_6O_{13}$ consists of alternating perovskite layers ($Sr_4Fe_2O_8$) containing iron cations in octahedral oxygen coordination and $Fe_4O_5$ layers where iron cations have 5-fold coordination of two types-square pyramids and trigonal bipyramids. Our preliminary electrochemical testes of pristine $Sr_4Fe_6O_{13}$ show a rather high area specific resistance ($0.47{\Omega}cm^2$ at $700^{\circ}C$) for ~20 ${\mu}m$ thick layers with CGO electrolyte. The electrochemical performances are improved by La addition up to x=1 ($La_1Sr_3Fe_6O_{13}$, $0.06{\Omega}cm^2$ at $700^{\circ}C$). In addition, thermal expansion coefficient (TEC) values of $La_1Sr_3Fe_6O_{13}$ specimen demonstrated $15.1{\times}10^{-6}\;^{\circ}C^{-1}$ in the range of 25-900$^{\circ}C$, which provides good thermal expansion compatibility with the CGO electrolyte. An electrolyte supported (300-${\mu}m$-thick) single-cell configuration of $La_1Sr_3Fe_6O_{13}$/CGO/Ni-CGO delivered a maximum power density of 584 $mWcm^{-2}$ at $700^{\circ}C$. In addition, an anode supported single cell by YSZ electrolyte (10-${\mu}m$-thick) with a porous CGO interlayer between the cathode and the electrolyte to avoid undesired interfacial reactions exhibited 1,517 $mWcm^{-2}$ at $800^{\circ}C$. The unique composition of $La_1Sr_3Fe_6O_{13}$ with low thermal expansion coefficient and higher electrochemical properties could be a good cathode candidate for intermediate temperature SOFCs with CGO and YSZ electrolyte.

• 센서학회지
• /
• 제5권6호
• /
• pp.51-59
• /
• 1996

실리콘기판과의 스트레스균형이 이루어진 150 nm-$Si_{3}N_{4}$/300 nm-$SiO_{2}$/150 nm-$Si_{3}N_{4}$ 다이아프레임위에 백금 박막히터 및 Bi-Sb 열전대배열을 형성하여 히터에서 실리콘기판으로 전달되는 열량의 차단효과가 현저히 개선된 유체센서를 제작하였다. 백금 박막히터는 유전체 다이아프레임의 열차단 효과때문에 비선형 전류-전압 특성을 나타내었고, 이 히터의 저항온도계수는 약 $0.00378\;/^{\circ}C$였으며, 또한 Bi-Sb 열전대의 Seebeck계수는 약 $97\;{\mu}V/K$였다. 기체의 열전도도가 증가할수록 유체센서가 나타내는 열기전력은 감소하였으며, 히터온도가 증가하거나 히터와 열전대사이의 거리가 감소할수록 센서의 감도는 증가하였다. 히터전압을 약 2.5V로 하였을 때 유체센서의 $N_{2}$유량에 대한 감도는 약 $1.27\;mV{\cdot}(sccm)^{-1/2}$였고, 열응답시간은 약 0.13 초였다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.