• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.84-90
• /
• 2015

The physicochemical properties and protease activities of spray-dried pineapple juice powders were investigated. The pH, soluble solids, and protease activity of the pineapple juice were pH 5.43, $12.8^{\circ}Brix$, and 4.82 unit/mL, respectively. The optimum pH and temperature of the protease activity from pineapple juice were pH 7.0 and $50^{\circ}C$, respectively. The microencapsulation of pineapple juice was achieved using maltodextrin and alginic acid through spray-drying. The L value and moisture content of the spray-dried powder were higher than those of the freeze-dried powder. The particle size of the freeze-dried powder ($501.57{\mu}m$) was higher than that of the spray-dried powder ($42.58-53.32{\mu}m$). The water absorption and water solubility of the powders were 0.41-0.87, and 90.45-99.76%, respectively. When compared, the protease activities were found to be in the following order : FD (1,297.47 unit/g) > SD-MA-1 (692.08 unit/g) > SD-MA-2 (664.66 unit/g) > SD-MA-3 (642.65 unit/g) > SD-M (633.51 unit/g). In the in vitro dissolution study measurements were conducted for 4 hr in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, using a dissolution tester at $37^{\circ}C$ in 50 rpm. The protease survival of the 3.74-15.69% microencapsulated pineapple juice powders improved with an increase in the treatment concentration of alginic acid.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.36-43
• /
• 2017

The aim of this study was to provide the quality index of salted Korean cabbage in a short-term distribution system. Salted Korean cabbages were packaged with or without 2% salt water, and then distributed in a conventional system (CVS) and a cold-chain system (CCS) for 6 h. The material temperature of samples with and without salt water gradually increased to $19.57^{\circ}C$ and $19.43^{\circ}C$ in a CVS, respectively and to $10.73^{\circ}C$ and $12.90^{\circ}C$ in a CCS, respectively. Salinity of the materials in a CCS did not change, whereas salinities of the materials in a CVS were 1.2 and 1.7 fold higher, respectively. Also, a slight increase in acidity was observed in both packaging materials in a CCS. In the case of a CVS, total aerobic bacteria and lactic acid bacteria increased to 7.62 log CFU/g and 6.77 log CFU/g in the materials with salt water, respectively, whereas the number of total aerobic bacteria and lactic acid bacteria ranged between 5.62-5.85 log CFU/g and 4.33-4.83 log CFU/g in the materials without salt water, respectively. However, significant microbial changes were not observed in a CCS as distribution time increased. CCS with salt water packaging was effective in achieving microbial control and maintaining physicochemical quality. Salinity, aerobic bacteria, and lactic acid bacteria can be useful as quality indices for a CVS, and acidity can be useful as quality index for a CCS.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.994-1002
• /
• 2009

A bacteriocin-producing bacterium identified as Bacillus licheniformis was isolated from soybean sauce. Antibacterial activity was confirmed by paper disc diffusion method, using Micrococcus luteus as a test organism. The bacteriocin also showed antibacterial activities against Bacillus sphaericus, Lactobacillus bulgaricus, Lactobacillus planiarum, Paenibacillus polymyxa, and Pediococcus dextrinicus. Optimal culture conditions for the production of bacteriocin was attained by growing the cells in an MRS medium at a pH of 6.5~ 7.0 and a temperature of 37$^\circ$C for 36$\sim$48 hr. Solvents such as chloroform, ethanol, acetone, and acetonitrile had little effect on bacteriocin activity. However, about 50% of bacteriocin activity diminished with treatment of methanol and isopropanol at the final concentration of 50% at 25$^\circ$C for 1 hr. It was stable against a pH variation range from 3.0 and 7.0, but the activity reduced to 50% at a pH range from 9.0 to 11.0. It's activity was not affected by heat treatment at 100$^\circ$C for 30 min and 50% of activity was retained after heat treatment at 100$^\circ$C for 60 min, showing high thermostability. The bacteriocin was purified to a homogeneity through ammonium sulfate precipitation, SP-Sepharose ion-exchange chromatography, and reverse-phase high-performance liquid chromatography (HPLC). The entire purification protocol led to a 75-fold increase in specific activity and a 13.5% yield of bacteriocin activity. The molecular weight of purified bacteriocin was estimated to be about 2.5 kDa by tricine-SDS-PAGE.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.95-101
• /
• 1997

This study was conducted to investigate how a labor saving for conventional hand sowing and respond to major agronomic traits under different planting density in 1993 and 1994. Each trial was a randomized block split plot with row spacing as the main plots and hill spacing as subplots. Sowing rate appeared lower in 20 or 25cm hill spacing using machine seeder than in hand sowing. Sowing time required reduced more 121 hours per hectare in 60cm row, 20cm hill spacings using machine seeder than in hand sowing. Increasing row and hill spacings reduced number of seedling stand per unit $area(m^2)$. Both number of pods per plant and grain weight per plant and showed highly increase in wide planting. Best yield obtained in 60cm row, 20cm hill spacing using machine seeder. Accumulative mean air temperature was positively correlated with stem height, number of pods per plant and yield, otherwise accumulative rainfall was negatively correlated with ones. A highly significant negative correlation was showed between number of seedling stand per unit $area(m^2)$ and number of branches, number of pods per plant, grain weight per plant and yield. Yield was positively correlated with number of branches, number of pods per plant and grain weight per plant.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.35-44
• /
• 1987

Differing in water conditions, the dry matter weight per plant was highest at 0 cm flooding depth, and was decreased at above 2 cm flooding depths. The shoot and spikes per pot developed best at flooding depths of 0 and 2 cm, but worst at -5cm or above 4cm flooding depths. The dry matter weight of shoots was linearly increased, but the weight of roots was sharply decreased according to high temperature after flower initation. The shoots and spikes per pot developed more effectively at 25$^{\circ}C$ than at 35 or 15$^{\circ}C$. The number of shoot and spike per pot were decreased according to higher shading. The effects of shading of 25-45% were not significantly small. The natural white and yellow spectra were the most effective to increase dry matter weight, shoots and spikes per pot. The dry matter weights of shoot and root per plant were not significantly different among at: 50 and 75% clay. The number of shoots were best and continuously increased at 75% clay, and the increments at 0 and 100% clays showed the lag period at early stage. The pattern of spikes was similar to shoots with less difference in various clay composition. The dry matter weight per plant in paddy field and upland field was basically similar. The numbers of shoot and spike were increased in response to increased fertilizer levels up to 20Kg per 10a of each component.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.906-913
• /
• 2019

To evaluate the removal performance of PO₄-P and NH₃-N, laboratory experiments were conducted by filling a container with oyster shells, pyrolyzed at 100℃ (POS100), 600℃ (POS600) and 800℃ (POS800), and passing artificial wastewaters through the container. The pH in the ef luent was found to increase due to CaO eluted from oyster shell. Removal amounts of PO₄-P of ~23.1 mg/kg, 16.1 mg/kg, and 15.9 mg/kg were obtained when POS100, POS600, and POS800, respectively, were used; therefore, the highest PO₄-P removal amount was obtained when POS100 was used. It is considered that Ca and dolomite in the oyster shells adsorbed and precipitated PO₄-P. Removal amounts of NH₃-N were of ~3.56 mg/kg, 5.72 mg/kg, and 3.97 mg/kg were obtained when POS100, POS600, and POS800, respectively, were used The low removal rate for NH₃-N is probably due to unstable nitrification, use of sealed containers, and the effect of NH₃-N being converted to NH₄⁺ upon increasing pH. Based on these results, pyrolyzed oyster shell is expected to promote changes in PO₄-P and NH₃-N concentrations through chemical reactions. These results can also be used for basic research in the development of wastewater treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.955-965
• /
• 2007

Safety helmets are used widely in various industries by workers since they are legally required to wear them. However, thermal discomfort is one of the major complaints from helmet users. To relieve this problem, frozen gelled packs can be considered for use inside the helmets. In this paper, tests were performed on humans to evaluate the physiological strains of wearing safety helmets and to investigate the effects of using frozen gelled packs inside the helmets. Experiments were conducted in a climatic chamber of WBGT $33{\pm}1^{\circ}C$ under four differed experimental conditions: 1) not wearing a safety helmet(NH); 2) wearing a safety helmet with frozen gelled pack A(HA); 3) wearing a safety helmet with frozen gelled pack B(HB); and 4) wearing only a safety helmet(OH). The results were as follows. First, when comparing NH with OH, physiological responses such as $\bar{T}_{sk},\;T_r$, HR and sweat rate were significantly higher in OH and subjective sensations were reported as less hot and more comfortable than NH(p<.05). Second, in regard to the frozen gelled packs inserted inside the safety helmets, some physiological responses in HA were different from those in HB, according to the two different types of packs. HA was hotter, more uncomfortable and less exhausted than HB. However, result from both HA and HB were lower than those from OH in terms of temperature and humidity inside safety helmet, sweat rate, $T_r$ increase, heat storage(p<.05). When wearing safety helmets with frozen gelled packs, it was shown that heat strain can be alleviated. These results are expected to help millions of workers who complain that wearing safety helmets is uncomfortable and messy.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.295-303
• /
• 1997

To investigate the transformation characteristics of nitrogen and carbon from cow manure compost amended in soil under different moisture conditions, dynamics of nitrogen and carbon were determined periodically for 15 weeks of aerobic incubation at room temperature during July${\sim}$November, 1996. Cow manure compost matured with mixing saw dust was amended with the 4 ratios (0, 2, 4, 6%(wt/wt)) in Ap horizon soil, which collected from green house in Yesan, Chungnam. Moisture was controlled with 0.2, 0.3, 0.4, and 0.5 of mass water conte nt (${\theta}$m) to air dried soil, and water loss was compensated at every sampling. During incubation, soil pH was decreased continuously, that was caused by hydrogen generated from nitrification of ammonium nitrogen. And pH became higher with inclining cow manure compost amendment and water treatment, that meaned the increase of mineralization of organic-N to $NH_4\;^+-N$. Total nitrogen was reduced with increasing water content, but total carbon showed the contrast tendency with that of nitrogen. Therefore, C/N ratio slightly decreased in the low water condition (${\theta}$m 0.2) during incubation, but increased continuously in high water condition over ${\theta}$m 0.4. As a result, it was assumed that soil fertility is able to be reduced in the high water content over available water content. Nitrate transformation rate increased lasting in the low water content less than ${\theta}$m 0.3. Itdropped significantly in the first $2{\sim}3$ weeks of incubation over ${\theta}$m 0.4. In particular, nitrate was not detected in ${\theta}$m 0.5 of water content after the first $2{\sim}3$ weeks. In contrast, ammonium transformation was inclined with increasing water treatment. Nitrogen mineralization rate, which calculated with percentage ratio of (the sum of ex.$NH_4\;^+-N$ and $NO_3\;^--N$)/total nitrogen, was continuously increased in the low water content of ${\theta}$m 0.2 and 0.3. But it saw the different patterns in high water content over ${\theta}$m 0.4 that was drastically declined in the initial stage and then gradually inclined . From the above results, nitrogen transformation patterns differentiated decisively in water content between ${\theta}$m 0.3 and 0.4 in soil. Thus, it is very important for the maintain of suitable soil water content to enhance fertility of soil amended with manure compost. However, excess treatment of manure compost might enhance the possibility of contamination of small watershed and ground water around agricultural area.

• Korean Journal of Environmental Biology
• /
• v.25 no.2
• /
• pp.168-177
• /
• 2007

By using DEM and digital actual vegetation map with MGE GIS software program, topographic features (altitude, slope, latitude, etc.) quantitatively were analysed and their data integrated as the index of climatic conditions (WI, CI, air temperature, etc.) in South Korea. Warmth Index (WI) decreases $5.27^{\circ}C{\cdot}month$ with latitudinal $1^{\circ} degree, and $3.41^{\circ}C{\cdot}month$ with attitudinal 100 m increase. The relationship between CI and WI values is expressed as a linear regression, $WI=116.01+0.96{\times}CI,\;R^2=0.996$. The distributional peaks of different plant communities along Warmth Index gradient showed the sequence of Abies nephrolepis, Taxus cuspidata, Abies koreana, Quercus mongolica, Carpinus laxiflora, Q. dentata, C. tschonoskii, Q. serrate, Pinus densiflora, Q. aliena, Q. variabilis, Q. acutissima, P. thunbergii, Q. acute, Castanopsis cuspidata var. sieboldii, Camellia japonica, Machilus thunbergii community from lower to higher values. The Quercus mongolica forest occurred frequently on E-NW and SE slope aspect within WI $70{\sim}80^{\circ}C{\cdot}month$ optimal range at mesic sites, NW and SE slope than xeric sites S and SW slope. The Q. serrata forest showed the most distributional frequency in NW and W slope aspect within WI $90{\sim}100^{\circ}C{\cdot}month$ range, Q. variabilis and Q. acutissima forest showed the high frequency of distribution in SE slope in WI $95{\sim}100^{\circ}C{\cdot}month$ range. By the slope gradient analysis, five groups were found: 1. Abies nephrolepis, Machilus thunbergii, 2. Taxus cuspidata, Abies koreana, Quercus mongolica, Q. dentata, Q. serrata, Q. variabilis, Castanopsis cuspidata var. sieboldii 3. Pinus densiflora, Q. aliena, Q. acutissima, P. thunbergii, Q. acuta 4. Carpinus laxiflora, Camellia japonica 5. C. tschonoskii from steep slope to gentle slope sequence.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.381-390
• /
• 2008

Two experiments were conducted to investigate effects of molasses addition to silage materials in ensiling Socheongryongtang meal on the nutritive quality of silage, palatability and various ruminal parameters in Korean native goats. In Experiment 1, Socheongryongtang meal silage was produced by the addition of 0, 0.5, or 1.0% molasses and stored for 40 days at room temperature. There were three replicates per treatment. Lactic acid contents of Socheongryongtang meal silage containing molasses(0.5 and 1.0%) were significantly(p<0.05) higher than that of the control(0%). However, the pH and butyric acid contents of Socheongryongtang meal silage containing molasses(0.5 and 1.0%) were lower than those of the control(0%). In addition, molasses(0.5 and 1.0%) increased the number of lactobacillus, but decreased the number of fungi in Socheongryongtang meal silage. In vitro dry matter disappearance tended to increase by molasses addition. In Experiment 2, three 1.5-yr-old Korean native female goats were employed in cross-over design to measure the palatability and various ruminal parameters of Socheongryongtang meal silage. Feed intake of Socheongryongtang meal silage containing molasses(0.5 and 1.0%) for 30 min significantly higher than that of control(0%). Silmilar trend was found when the feed intake was measured for 6 hr. In various ruminal parameters, molasses addition to silage materials increased propionic acid(P) and total volatile fatty acid contents, but decreased pH, acetic acid (A), and butyric acid. The A/P ratio was the lowest in 1.0% molasses treatment group. It is concluded that molasses addition in ensiling Socheongryongtang meal could enhance its nutritional quality and lengthen storage period. Also the palatability of silage was improved by the addition of molasses.