• Korean Journal of Rural Living Science
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1998

The purpose of this study is to investigate the effect of wearing sweat suit on sweating rate during jogging. 4 healthy female students served as subjects in the experimental chamber which was controlled 22$\pm$1$^{\circ}C$, 60$\pm$10%RH and no wind. The experimental clothes were Sweat Suit (SS) and General Suit (GE), SS was the product of R sports wear company which was consisted of long-sleeved jumper (100% polyester) and full length trousers (100% polyester) and GE were consisted of long sleeved shirt (100% cotton) and full length trousers (100% cotton). The subject wore same socks and shoes in both experimental clothes SS and GE. The subject reported at the experimental chamber at the same time on each experimental day. exchanged their clothes to the experimental clothes SS or GE, wore all sensors for the physiological measurements and had a rest in a sitting posture about 40 minutes. After rest, the subject carried out 30 min jogging on the tread mill with the speed 3.6miles/hour and during the jogging rectal temperature, skin temperatures (7 sites of the skin surface), heart rate, VO2, and evaporative weight loss were measured continuously and compared between two experimental clothes SS and GE. The major findings were as follows : The increase in rectal temperature during 30 min jogging was higher in experimental clothes SS than in GE and mean slim temperature kept higher in SS than in GE. VO2 and heart rate were a little bit higher in the later period of jogging in SS than in GE. The evaporative weight loss was greater in SS than in GE. These results indicate that the thermophysiological responses and sweating rate differs according to the wearing suit even though the subject performed same exercise.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.129-132
• /
• 2008

All bearing device should be examined to determine that they are functioning properly. Small changes in other portions of the structure, such as pier or abutment settlement, may be reflected in the bearings. Bearings should be checked to see that they can move freely and are clear of all foreign material. Shoes should be in proper position relative to the temperature at the time of the inspection. Check anchor bolts for any damage and to see that nuts are secure. See that anchor bolt nuts are properly set on the expansion bearings to allow normal movement. In this paper, rehabilitation method for damaged bearings is proposed and damage example of the skewed bridge is illustrated

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.215-220
• /
• 2000

This study on the incineration ash and sintering pellet from sewage sludge was carried out to evaluate the possibility of recycling in sewage sludge disposal. The samples used in this experiment were raw sewage sludge, its incineration ash, and sintering pellet. The characteristics of the three sample types were identified using X-ray diffraction(XRD), X-ray fluorescence(XRF), atomic absorption spectroscopy(AAS), and inductively coupled plasma spectroscopy(ICP). The chemical compositions of all three sample types were similar in their clay component, however, the sewage sludge had a high content of organic materials. From an analysis of the mineral content of the three sample types, the conversion of their compositions was found to be relative to temperature. Accordingly, incineration ash and sintering pellet both have potential for use as a functional construction material.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.223-231
• /
• 2013

This research has a main focus on providing fundamental data for on-the-spot industrial fields by comparing and contrasting physical properties of fluffy spun-like material. The fluffy spun-like yarn is developed as fluffy yarn similar to natural spun-like yarn by treating polyester(FDY and + type shaped DTY) with ATY machine. In this experiment, using ATY machine for raw material texturing, we produced two fluffy yarns: (i) + type shaped(50d/36f, DTY) as core yarn and 100d/192f FDY as effect yarn[ATY(D)], (ii) FDY(75/36) as core yarn and 100d/192f FDY [ATY(F)] as effect yarn. After producing thous yarns, we twisted them with 500T/M, 700T/M, 1000T/M, respectively. produced yarns through this process were used as the samples for this experiment. Even though the shrinkage of fluffy yarn ATY(F) and ATY(D) becomes high as treated temperature rises and treated time lengthens, it is more affected by treated temperature then by treated time. In this experiment, produced fluffy yarn[ATY(D)] shows a little high values for temperature, but almost same values for higher temperatures. When we compare ATY(F) with ATY(D) fluffy yarn shows more natural fluffy yarn surface structure like natural cotton. The shrinkage of 700T/M twisted ATY(D) fluffy yarn show about 11% under treated temperature $180^{\circ}C$ and treated time 30min, and about 7% under $120^{\circ}C$ and 30min, respectively. But the shrinkage of 1000T/M fluffy yarn shoes about 9% and 6% under same conditions. Regarding treated time, tenacity and initial modulus of ATY(D) fluffy yarn rise high until 30min, but do not show much increase above 30min. Regarding treated temperature, tenacity and initial modulus of it rise high aboyer $140^{\circ}C$.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.6 no.1
• /
• pp.179-213
• /
• 1984

The history of recording and conserving for maintenance the human's memory from ancient times to modern's has brought about a lot of changing process of the recorded information media with developing in culture, and each society has made important recorded materials in his library as essentially the social apparatus. But most of them that were damaged by factors of the natural disaster, humidity, temperature, light, fungi and insects in the library, and were resulted in deterioration and losing the numerous materials. For removing the inevitable phases repeated, there are studying for counterplan of the fundamental environment factors about preservation, restoration and chemical research of materials in advanced countries, but I get a few researches about protecting the cultural properties. Therefore I research the survey of the actual conditions on 72 university libraries centering around them, and then I have researched the collection rate 81 percent, 58 university libraries. (local : 35, in seoul : 23) As the result of this research, I propose the model of the environment factors of conserving the library materials. 1) To apply the equipment of processing the radiant energy to the new construction and buildings. 2) To remove factors that occur fungi and insects by facilities being controlled relative humility, temperature, and to equip the ventilation arrangement in the library. 3) To shelve all acquired and bound materials after proceeding the vacuum fumigator. 4) Those who want to enter into the library stack were surely taken in sterilzing their hands and shoes, and must put on the gown. 5) To use the vacuum dusting thing (machine) for removing the dust without spreading out the floor of the library at any time. 6) To set up the gas automatic fire extinguisher worked by smoke sensor. 7) To assist the research into the preservation, natures and environment of recorded materials, and to supply financial funds for librarian. 8) To hold regularly the workshop be able to educate the methods of preservation materials by the constant system. (Library Association) 9) To add to responsibilities on certification of preservation materials for librarian. 10) To hold the constant committee system in each library. 11) To keep up with the ideal environment (humidity, temperature, light, ventilation, etc.) of preservation materials in the arrangement room, and to put on the gown.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.137-143
• /
• 2022

In this study, the polyurethane acrylates (PUA) resin with good adhesive and flexibility for adhesive for shoes and clothing were synthesized using that poly(tetramethylene adiphate glycol) (PTAd), poly(tetramethylene ether glycol) (PTMG) as polyester polyol and polyether polyol respectively, including 4,4'-methylene diphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI), 1,4-butandiol (1,4-BD), 2-hydroxyethyl methacrylate (2-HEMA) and dibutyl amine (DBA). The effect of polyol blend in the polyurethane acrylate on thermal and mechanical properties, adhesion strength and flexural strength were studied. The glass transition temperature (T_g) of PUA was confirmed in range of -70~-40 ℃. In addition, the glass transition temperature (T_g), decomposition temperature (T_d), tensile strength adhesion strength and heat resistance were increased as increasing of PTAd amount while the elongation, water resistance and flexural properties were decreased. The synthesized polyurethane acrylate with 5:5 ratio of PTAd and PTMG indicated the highest adhesion strength and flexural properties.

• Journal of Korean Physical Therapy Science
• /
• v.24 no.3
• /
• pp.30-38
• /
• 2017

Purpose: The purpose of this study was to find out changes in muscle activity and body heat of tibialis anterior and gastrocnemius muscles according to the area touching the ground through the areas of different heel heights using electromyography and infrared thermography. Method: This study was carried out for 15 healthy women. After walking for 30 minutes, the body temperature was measured in a standing state in front of the measuring instrument, and the distance between the treadmill and the thermography was about 50M, which may cause an error in measurement. Result: The results of the comparison of changes in muscle activity and body heat showed significant differences all in tibialis anterior, medial gastrocnemius muscle an lateral gastrocnemius muscle. The changes in body heat of tibialis anterior and medial gastrocnemius muscles according to the shape of the heel were lower as the area of the heel touching the ground was wider. Conclusion: This study was conducted to find out changes in muscle activity and body heat of tibialis anterior and gastrocnemius muscle depending on the area touching the ground through different heel areas.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.89-98
• /
• 2018

The purpose of this study was to compare the foot plantar pressure and temperature changes of the developed combat boots with functional impact absorption and ventilation insole. A total of 11 male subjects(age: $21.8{\pm}2.2yrs$, height: $174.3{\pm}3.6cm$, weight: $71.6{\pm}8.6kg$, foot length: $261.0{\pm}1.0mm$) were recruited to compare the foot plantar pressure and temperature changes of the three types of combat boots: Combat boots A (generalized combat boots), Combat boots B (developed combat boots with ventilation function), Combat boots C (Application of ventilation function and impact absorption insole to combat boots B). Pedar-X and a portable thermistor temperature sensor were used to measure the foot plantar pressure parameters and the internal temperature of the combat boots, respectively. One-way ANOVA was used to compare the results of plantar pressure and temperature changes. The results were as follows: First, in the foot plantar pressure parameters, combat boots C showed the significant lower maximum foot plantar pressure in the right/left rear foot compared with combat boots A and average foot plantar pressure in the left foot compared with combat boots B. Second, after 40 minutes from the start of walking, the developed combat boots B and C showed the significant lower temperature than the general combat boots A.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.185-189
• /
• 2012

While there is no standards on slip risk for contaminants on surface, glycerol is described in standard contaminant for measuring coefficient of friction(COF) and slip resistance such as ISO 13287. But that is just used to measure the slip resistance of surface materials and shoes not to evaluate the contaminant materials. Therefore the objective of this study was to find out the relationship between standard contaminant and the contaminants used usually at the workplaces. For this, some measurement criteria were acquired from the analysis based on biomechanics and kinetics of human gait during slips. The slip resistance according to viscosity of the contaminants was measured applying the criteria and slip probability was determined by the gait analysis. Some factors which should be considered when measuring the slip resistance were identified. The velocity, acceleration, contact time and contact pressure should be 1 m/sec, 10 $m/sec^2$, 350 kPa and less than 0.5sec respectively. The variation of viscosity according to temperature for working oils was different from that of standard contaminant. The static coefficient of friction (SCOF) of working oils was almost 0.5 times as large as the SCOF of standard contaminant. So it was assumed to be difficult to compare the contaminants at the workplaces with the glycerol as a standard contaminant for estimating the slip risk.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.181-196
• /
• 1998

This study is about the similarities and the individualties of the traditional costumes in the ruling classes of Koguryo(高句麗), Bakjae(百濟), and Shilla(新羅). The analysis is based on the views of historical reformation on$\boxDr$Sam-gooksagi(三國史記)$\boxUl$Bongi(本紀). The costumes that were worn by the governing classes are categorized by the following, official duties, wars, ceremonies, and recreations(hunting). Up to the present time, there has been a great tendency to emphasize the similarities of the Three Kingdoms' costumes among most of academic researchers. However, the conceptions of individualities of the costumes among the Three Kingdoms were conceived by the facts that geological environments, political systems, social traditions, social aspects, and foreign affairs. The Three Kingdoms had different official rank systems along with official costume systems. Monopolization of official positions of the ruling parties tried to show their dignity and authority through styles of their costumes. The costumes of Koguryo were greatly differentiated by geographical regions ; One direct example is cheak of Pyoungyang and Anak regiona was named as official hats of rulling parties of Kokuryo. However, in this study, the cheak was viewed as a product of influences of Chinese costume. Further-more, the laguan was named as mooguan. Costumes of ceremonial occasions were heavily decorated to symbolize dignity and auth-ority. Metal ornament of headgear and belt, metal shoes were con-sidered as ceremonial costumes. the tight hunting costumes of Koguryo shown in mural pain-ting costumes of Koguryo shown in mural pain-tings were presumed to be spring and autumn clothing. Excavated from Neungasnlee, the hunting costumes inscribed in the gold incense burnner were confirmed as hunting costumes of Bakjae. The individuality of the costumes of the Three Kingdoms could also be supported by the fact that they had different climates. The temperature difference between Gipan region and Kyoungjoo(慶州) region was emphasized. Especially winter clothing would have had a big difference in style than the summer clothing. Through the research summarized above, this study was able to confirm that each of the Three Kingdoms had developed individualized costumes based on their geographical, cultural and environmental factors. Furthermore, through this study, it was possible to find out the difference as well as the similarities of their costumes according to each of their people's sociopolitical status, awareness of indepen-dence, andunique historical and traditional charactoristics.