• The Research Journal of the Costume Culture
• /
• v.12 no.2
• /
• pp.279-289
• /
• 2004

This study was conducted to compare the hunting reaction of finger in the cold water. Finger skin temperature is measured the left middle finger tip immersion in cold water of 5℃ for 30 minutes and measurements were made on finger skin temperature(Ts), thermal comfort, and cold pain sensations during the experiment at the spring (March) and Winter(December). Results were follows. Is before immersion was at the highest in spring and at the lowest in winter and was closely related to the indoor temperature Ts during immersion and recovery. Mean of finger skin temperature(MST), the skin temperature at the first rise(TTR) and amplitude of finger skin temperature reaction during immersion(AT) were significant higher in spring than that in winter(P＜.01). The lowest skin temperature(LST) during the cold water immersion were significantly higher in spring than that in winter (P＜.05). The frequency of the appearance of cold-Induced vase dilation(CIVD) was higher in spring than that in winter. However, time for the first temperature(TTR) and recovery time(RT) had no seasonal variation. In addition, cold pains during immersion were felt more strongly in spring than in winter. Local thermal sensation, finger thermal sensation in dynamic state during hand immersion was different from that in the Winter. Spring was slowly cold in cold water immersion.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.155-163
• /
• 2005

Pressure heating rollers with temperature control were mounted to a flat cable laminating machine (FCLM). Pressure heating rollers should be heated up to the setting temperature $(175^{\circ}C)$ and kept on to producing good quality flexible flat cables (FFC). Existing Pressure heating rollers took more than 70minutes to the setting temperature and did not keep on the setting temperature in production. Temperature controller, electric power controller, material and diameter of rollers and heat capacities were changed to improve the temperature control of the pressure heat rollers for better production of the FFC. Thus, the reaching time to the setting temperature (RT), temperature stability time (TST) and temperature hunting (TH) were measured and compared with the existing pressure rollers case. The RT of A roller was shortened by 50minutes, and B roller was shortened by 15minutes. The TST of A roller was shortened by 13minutes, and B roller was shortened by 15minutes. The THs of both A and B rollers were settled up to ${\pm}5^{\circ}C$. Finally, the productivity of the FCLM and the quality of the FFC were increased.

• The Korean Journal of Community Living Science
• /
• v.18 no.4
• /
• pp.599-607
• /
• 2007

We analyzed the effects of regular Jjimjilbang (Korean sauna) exposure on the cold tolerance in young and elderly females. Subjects were young (n=7) and elderly (n=7) females who had never had Jjimjilbang exposure experience. The Jjimjil training group was exposured in the Jjimjilbang 19 times per week. Jjimjibang exposure was limited to three times per day. Jjimjil activity was taken freely. To prove the effects of the cold tolerance, subjects were exposed to cold air ($12{\pm}1^{\circ}C,\;60{\pm}10%$RH). In these conditions, subjects were exposed for 30 minutes at which time rectal temperature, skin temperatures, clothing microclimate, energy expenditure, blood pressure and subjective sensation were measured. To prove the effects of the local cold tolerance, vascular hunting reaction was observed measuring the finger skin temperature while the left middle finger tip was immersed in cold water of $0^{\circ}C$ for 30 minutes. The results are as follows. According to repeated Jjimjil exposure, rectal temperature changes, peripheral temperature and energy expenditure were increased gradually in the cold climate chamber. Blood pressure, subjective sensation and vascular hunting reactions did not show any significant difference. In conclusion, regular Jjimjilbang exposure has negative effects on the ability of the body to improve its regulation of temperature especially in cold tolerance.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.117-126
• /
• 2003

This study was conducted to develop precision control system fur cold storage facility that could offer safe storage environment for green grocery. For that reason of neuro-fuzzy control system with learning ability algorithm and single chip neuro-fuzzy micro controller was developed for cold storage facility. Dynamic characteristics and hunting of neuro-fuzzy control system were far superior to on-off and fuzzy control system. Dynamic characteristics of temperature were faster than on-off control system by 1,555 seconds(123% faster) and fuzzy control system by 460 seconds(36.4% faster). When system was arrived at steady state. hunting was ${\pm}$0.5$^{\circ}C$ in on-off control system, ${\pm}$0.4$^{\circ}C$ in fuzzy control system, and ${\pm}$0.3$^{\circ}C$ in neuro-fuzzy control system. Hunting of humidity and wind velocity was also controlled precisely by 70 to 72.5% and 1m/s For storage experiment with onion, characteristics of neuro-fuzzy control system were tested. Dynamic characteristics of neuro-fuzzy control system made cold storage facility conducted precooling ability and minimized hunting.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.181-196
• /
• 1998

This study is about the similarities and the individualties of the traditional costumes in the ruling classes of Koguryo(高句麗), Bakjae(百濟), and Shilla(新羅). The analysis is based on the views of historical reformation on$\boxDr$Sam-gooksagi(三國史記)$\boxUl$Bongi(本紀). The costumes that were worn by the governing classes are categorized by the following, official duties, wars, ceremonies, and recreations(hunting). Up to the present time, there has been a great tendency to emphasize the similarities of the Three Kingdoms' costumes among most of academic researchers. However, the conceptions of individualities of the costumes among the Three Kingdoms were conceived by the facts that geological environments, political systems, social traditions, social aspects, and foreign affairs. The Three Kingdoms had different official rank systems along with official costume systems. Monopolization of official positions of the ruling parties tried to show their dignity and authority through styles of their costumes. The costumes of Koguryo were greatly differentiated by geographical regions ; One direct example is cheak of Pyoungyang and Anak regiona was named as official hats of rulling parties of Kokuryo. However, in this study, the cheak was viewed as a product of influences of Chinese costume. Further-more, the laguan was named as mooguan. Costumes of ceremonial occasions were heavily decorated to symbolize dignity and auth-ority. Metal ornament of headgear and belt, metal shoes were con-sidered as ceremonial costumes. the tight hunting costumes of Koguryo shown in mural pain-ting costumes of Koguryo shown in mural pain-tings were presumed to be spring and autumn clothing. Excavated from Neungasnlee, the hunting costumes inscribed in the gold incense burnner were confirmed as hunting costumes of Bakjae. The individuality of the costumes of the Three Kingdoms could also be supported by the fact that they had different climates. The temperature difference between Gipan region and Kyoungjoo(慶州) region was emphasized. Especially winter clothing would have had a big difference in style than the summer clothing. Through the research summarized above, this study was able to confirm that each of the Three Kingdoms had developed individualized costumes based on their geographical, cultural and environmental factors. Furthermore, through this study, it was possible to find out the difference as well as the similarities of their costumes according to each of their people's sociopolitical status, awareness of indepen-dence, andunique historical and traditional charactoristics.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.496-498
• /
• 1998

This paper presents a mathod of reducing hunting size or steady state error occurred in the output signals via regulating the PID controllers gains. The PID controllers are widely used in industrial processes. Such processes have several inherent features like continuous operation, fixed set value, and difficulty in applyirty test signals. Thus, this paper suggests fuzzy rules of reducing hunting magnitude or steady state error using output signals only. Such an intelligent tuning technique utilizes both the experts, experience and control engineers' theortical background. For two kinds of systems such as temperature or DC motors speed control, we showed the validity of proposed method in this paper.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.350-353
• /
• 2003

In this paper, we proposed the method to design fuzzy controller using the experience of the operating expert and experimental numeric data for the robust control about the noise and disturbance instead of the traditional PID controller for the main steam temperature control of the thermal power plant. The temperature of main steam temperature process has to be controlled uniformly for the stable electric power output. The process has the problem of the hunting for the cases of various disturbances. In that case, the manual action of the operator happened to be introduced in some cases. We adopted the TSK (Takagi-Sugeno-Kang) model as the fuzzy controller and designed the fuzzy rules using the informations extracted directly from the real plant and various operating condition to solve the above problems and to apply practically. We implemented the real fuzzy controller as the Function Block module in the DCS(Distributed Control System) and evaluated the feasibility through the experiment81 results of the simulation.

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.34-40
• /
• 1998

Performance characteristics of a refrigeration systems with various expansion valves and superheat changes were investigated experimentally. Experimental data have been taken utilizing three different devices; a thermostatic expansion valve, a linear type electronic expansion valve and a solenoid type electronic expansion valve. The data taken from tile three types of expansion valves were discussed with the temperature distribution of each zone in the evaporator and the superheat changes of the evaporator outlet In each zone temperature distribution fluctuated larger with the thermostatic expansion valve than with the electronic expansion valves. The optimum superheat ranged from $5^{\circ}C\;to\;15^{\circ}C$, and the superheat with the thermostatic expansion valve showed hunting phenomenon, which affected the evaporating and condensing temperature.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.110-117
• /
• 2013

Maximum Torque Per Amp (MTPA) control for induction motor drives seeks to achieve a desired torque with the minimum possible stator current. This is favorable in terms of inverter operation and nearly optimal in terms of motor efficiency. However, rotor resistance variation can cause significant performance degradation. This work demonstrates that existing MTPA controls perform sub-optimally as temperature varies. An adaptive MTPA control strategy is proposed that always achieves optimal performance without exhibiting hunting phenomenon regardless of rotor temperature. The proposed control is experimentally shown to accurately achieve the desired torque.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.2
• /
• pp.187-192
• /
• 2004

In this paper, we proposed the method to design fuzzy controller using the experience of the operating expert and experimental numeric data for the robust control about the noise and disturbance instead of the traditional PID controller for the main steam temperature control of the thermal power plant. The temperature of main steam temperature process has to be controlled uniformly for the stable electric power output. The process has the problem of the hunting for the cases of various disturbances. In that case, the manual action of the operator happened to be introduced in some cases. We adopted the TSK (Takagi-Sugeno-Kang) model as the fuzzy controller and designed the fuzzy rules using the informations extracted directly from the real plant and various operating condition to solve the above problems and to apply practically. We implemented the real fuzzy controller as the Function Block module in the DCS(Distributed Control System) and evaluated the feasibility through the experimental results of the simulation.