• Information and Communications Magazine
• /
• v.15 no.9
• /
• pp.97-106
• /
• 1998

It is crucial to predict the variabilities of the near-earth space environment associated with the solar activity, which cause enormous socio-economic impacts on mankind. The geomagnetic storm prediction scheme adopted in this study is designed to predict such variabilities in terms of the geomagnetic indices, AE and Dst, the cross-polar cap potential difference, the energy dissipation rate over the polar ionosphere and associated temperature increase in the thermosphere. The prediction code consists of two parts; prediction of the solar wind and interplanetary magnetic field based upon actual flare observations and estimation of various electrodynamic quantities mentioned above from the solar wind-magnetosphere coupling function 'epsilon' which is derivable through the predicted solar wind parameters. As a test run, the magnetic storm that occurred in early November, 1993, is simulated and the results are compared with the solar wind and the interplanetary magnetic field measured by the Japanese satellite, Geotail, and the geomagnetic indices obtained from ground magnetic observatories. Although numerous aspects of the code are to be further improved, the comparison between the simulated results and the actual measurements encourages us to use this prediction scheme as the first appoximation in forecasting the disturbances of the near-earth space environment associated with solar flares.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.71-81
• /
• 2007

One of the most important hydrologic components is evapotranspiration. It is a process by which water is evaporated from moist land surfaces and transpired into atmosphere by plants. There are many methods of estimating evapotranspiration rate and its potential such as the methods of soil-moisture sampling, lysimeter measurements, water balance, energy balance, groundwater fluctuations and evapotranspiration. But it is very difficult to estimate evapotranspiration in terms of regional discrete characteristics of topography and/or vegetation. The evapotranspiration is strongly affected by ground covering vegetation, and the degree of vegetation growth. In order to grasp vegetation condition over a vast study area, NDVI (Normalized Difference Vegetation Indices) calculated from the data obtained from NOAA/AVHRR were utilized. Through multi-regression analysis, we developed a model equation to estimate the evapotranspiration using NDVIs and temperature data.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.636-643
• /
• 2006

Supercritical water oxidation of DMMP using continuous flow reactor was studied at temperature ranging from 440 to $540^{\circ}C$ and a fixed pressure of 242 bar. The range of residence times in the reactor was from 10 to 26 s, and oxygen excess value varied from -40 to 200%. Destruction efficiencies (DE) of DMMP were greater than 99.7% at $540^{\circ}C$, and increased as the DMMP concentrations were increased. DE of DMMP were significantly affected by oxygen concentration under stoichiometric amount, but showed little difference over stoichiometric amount. On the basis of 30 data with conversions greater than 85%, kinetic correlations for the DE of DMMP were developed. The pre-exponential factor was $(1.10{\pm}0.76){\times}10^6$, and the activation energy was $90.66{\pm}3.87kJ/mol$, and the reaction orders for DMMP and oxygen were $1.02{\pm}0.03$, $0.32{\pm}0.03$, respectively. The model predictions agreed well with the experimental data.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1113-1119
• /
• 2003

We used isopropanol which has low boiling point to prepare thin films at low temperature and changed mole concentration of zinc acetate from 0.3 to 1.3 mol/l. The structural, optical and electrical properties of ZnO thin films with Zn content were investigated. ZnO thin films highly oriented along the c-axis were obtained at Zn concentration of 0.7 mol/l. ZnO thin films with Zn concentration of 0.7 mol/l showed a homogeneous surface layer of nano structure. The transmittance of ZnO thin films by UV-vis. measurement was about 87% under the Zn concentration of 0.7 mol/l, but rapidly decreased over the 1.0 mol/l. The optical band gap energy was obtained from 3.07 to 3.22 eV which is very close to the band gap of bulk ZnO (3.2 eV). The electrical resistivity of ZnO thin films was about 150 $\Omega$-cm that shows little difference with Zn concentration. I-V curves of ZnO thin films exhibited typical ohmic contact properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• Journal of Ginseng Research
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2005

Electron beam (EB), electrically produced from an electron accelerator, was compared with gamma ray (GR) in terms of its influence at doses from 0 to 15 kGy on the lipid stability of white and red ginseng powders. Irradiation (EB or GR) less than 10 kGy showed negligible effects on the composition of fatty acids in white and red ginseng powders. The thiobarbituric acid (TBA) value, however, increased with irradiation doses and storage time in both samples, which was more significant in red ginseng than white ginseng. Red ginseng revealed higher electron donating ability than white ginseng, even though there was insignificant difference between non-irradiated and irradiated samples irrespective of the post-irradiation storage for 4 months under room temperature as well as energy sources applied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.376-381
• /
• 2019

In this work, we evaluated the structural, electrical and optical properties of $Ge_8Sb_2Te_{11}$ and Cu-doped $Ge_8Sb_2Te_{11}$ thin films prepared by rf-magnetron reactive sputtering. The 200-nm-thick deposited films were annealed in a range of $100{\sim}400^{\circ}C$ using a furnace in an $N_2$ atmosphere. The amorphous-to-crystalline phase changes of the thin films were investigated by X-ray diffraction (XRD), UV-Vis-IR spectrophotometry, a 4-point probe, and a source meter. A one-step phase transformation from amorphous to face-centered-cubic (fcc) and an increase of the crystallization temperature ($T_c$) was observed in the Cu-doped film, which indicates an enhanced thermal stability in the amorphous state. The difference in the optical energy band gap ($E_{op}$) between the amorphous and crystalline phases was relatively large, approximately 0.38~0.41 eV, which is beneficial for reducing the noise in the memory devices. The sheet resistance($R_s$) of the amorphous phase in the Cu-doped film was about 1.5 orders larger than that in undoped film. A large $R_s$ in the amorphous phase will reduce the programming current in the memory device. An increase of threshold voltage ($V_{th}$) was seen in the Cu-doped film, which implied a high thermal efficiency. This suggests that the Cu-doped $Ge_8Sb_2Te_{11}$ thin film is a good candidate for PRAM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.227-232
• /
• 2019

Heat pump systems based on ocean thermal energy conversion (OTEC) systems use the temperature difference between deep ocean water and surface ocean water to operate. However, they may have heat transfer degradation due to corrosion on the heat exchanger surface due to the salinity of sea water. This study presents experimental results for the heat transfer decrease of corroded metal tubes with respect to corrosion time. In order to replace high-priced titanium, electro-deposition (ED) coating was performed on aluminum tubes. Aluminum tubes with ED coating thicknesses of 10, 15, and $20{\mu}m$ were tested for double-tube heat exchangers after performing accelerated corrosion for 6, 12, and 18 weeks. The effects of the coating thickness and the corrosion time on the heat transfer degradation were investigated. From the results, the aluminum tube with an ED coating of $20{\mu}m$ thickness can be suggested as a candidate for replacing titanium tubes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.261-261
• /
• 2017

최근 전 세계적으로 지구온난화로 인한 집중호우, 가뭄, 태풍 등 자연재해가 빈번하게 일어나고 있다. 이에 2016년 유엔기후변화협약당사국총회(COP22)에서는 지구온난화의 심각성을 인식하고, 한국의 2030년 온실가스 배출 전망치(BAU) 대비 37% 감축 달성과 같이 국가별로 온실가스 감축 목표를 선정하였다. 이를 달성하기 위해 국내에서는 현재까지 사용되지 않았던 자연에너지원의 활용이 부각되고 있으며, 특히 미활용에너지 중 하천수의 온도차에너지가 활발히 논의되고 있다. 하지만 미활용에너지 활용에 앞서 에너지원으로의 적정성 분석이 반드시 필요하다. 본 연구에서는 국내 5대강 중 한강권역을 대상으로 하천수 온도차에너지의 부존량 또는 이용가능량을 산정하고자 하였다. 한강본류 6개 하천유지유량 고시지점을 대상으로 해당 지점의 30년간(1987~2016년) 유량자료를 이용하여 유황 및 계절별 유량변동 특성을 분석하였고, 부존량 및 이용가능량을 검토하였다. 부존량 및 이용가능량 분석을 위해서는 선행 연구에서 적용된 하천유지유량, 하천수사용허가량 및 용수수요량 등을 고려한 산정식을 적용하였다. 본 연구는 미활용에너지인 하천수 온도차에너지의 실제 이용가능량을 분석하여 새로운 에너지원으로 활용할 수 있는지 평가하기 위해 수행되었다. 본 연구의 결과는 하천수 온도차에너지의 온실가스 감축을 위한 화석에너지의 대체에너지로서 새로운 가능성을 평가하는 지표가 될 것이라 기대된다. 또한 하천수 온도차에너지의 실제적인 적용을 위해서는 추후 연구를 통해 생태계 등 환경에 미치는 영향을 분석하고, 설치 및 유지비용에 따른 경제성 평가가 필요할 것으로 판단된다.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.6
• /
• pp.27-37
• /
• 2019

This study focused on the possibility of reducing the cooling load through the change of micro climate in the outdoor space during summer season. This study proposes an efficient planning model by comparing the effects of urban heat island mitigation through wind path planning, outdoor space vegetation, and exterior material change by using the basic model of the street-oriented block housing proposed in the previous research by the same author. As a result, the most effective wind path planning strategy in the street-oriented block housing was the change of the air flow through the mass height adjustment. When the tall building masses were staggered and arranged in a balanced manner, the overall wind environment could be improved. The greater the height difference between low and high masses, the better the air flow was shown. It was also important to arrange the building masses so that the inlet of the main wind was open and to allow the external space to connect to the adjacent block to create a continuous flow. The change of outdoor space vegetation and flooring, and the formation of wind paths through the opening of lower part also showed the effect of heat island reduction. In addition, the change of PMV in summer was the biggest influence of shadow by tall building mass. Attention should be paid to the fact that high-albedo exterior materials are adversely affected by multiple reflections in dense street-oriented block housing. The use of albedo of the exterior material showed that it is necessary to pay attention to apply in the high density block housing. This is attributed to the rise of the temperature due to the absorption of energy into the low-albedo flooring, where the high-albedo exterior causes multiple reflections.