• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.2
• /
• pp.106-110
• /
• 2017

The developmental responses of insects to temperature are important considerations in gaining a better understanding of their ecology and life histories. Temperature dependent models permit examination of the effect of temperature on the geographical distributions, population dynamics, and management of insects. The measurements of insect developmental and survival responses to temperature pose practical challenges that depend. The developmental characteristics of A. diaperinus were investigated at four temperature regimes (20, 25, 30 and $35^{\circ}C$), a relative humidity of 60%, and a light:dark photoperiod of 16:8h. The developmental time from larva to adult was 129.0, 49.8, 40.5 and 31.9 days at temperatures of 20, 25, 30 and $35^{\circ}C$, respectively. Pupal rate was 80.0%, 100%, 83.3% and 91.7% at temperatures of 20, 25, 30 and 35 respectively. There is an increasing need for a standardized manual for rearing this. Pupa had significantly lower weights at $35^{\circ}C$ than at the other temperatures. Female pupae (20mg) were significantly heavier than male (17mg).

• Fisheries and Aquatic Sciences
• /
• v.4 no.3
• /
• pp.112-119
• /
• 2001

Aim of this research is to investigate the effect of temperature shocks on the physiological responses of cultured olive flounder (Paralichthys olivaceus) and black rockfish (Sebastes schlegeli). Olive flounder and black rockfish were suffered with high and low temperature shocks for 4 and 8h, respectively, in laboratory conditions and then the changes in glucose, lactate, total protein, uric acid, and triglycerides-glycerol in blood plasma were analyzed. We observed that lactate and uric acid increased for up to 4h and then decreased for up to 8h by the high and low temperature shocks, and total protein decreased for up to 4h and then recovered for up to 8h by the high temperature shock in both fishes. Glucose by the high and low temperature shocks and triglycerides-glycerol by the low temperature shock increased for up to 4h, and then decreased in olive flounder, but increased for up to 8h in black rockfish. From the result, we speculated that the two fishes have an interspecific variation in the regulatory systems of glucose and triglycerides-glycero1. Glucose would play important role as an energy source during the temperature shocks and for an intermediate substance for low temperature tolerance, and glycerol of triglycerides-glycerol would play an important role for low temperature tolerance. In olive flounder, the turnover of chemical change by temperature shock took more than 4h, all chemicals returned almost to the initial level for up to 8h, but fish death followed only in 8h with the high temperature shocked group within two days. Therefore, we suggested that fish would be damaged severely by the longer time exposure of high temperature and mortality would occur after a certain time later than the shocked time as a post-effect.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.159-165
• /
• 2018

The seed yield of summer plants is affected by climate change due to high temperature. High temperature during the reproductive growth period decrease pod, seed weight in soybean. This study was conducted at National Institute of Crop Science (NICS) during the growing season. The objective of this study was to determine the effect of high temperature on growth and seed yield responses of soybean varieties using a temperature gradient chamber (TGC). In 2017, the Daewonkong (DWK), Pungsannamulkong (PSNK), and Deapungkong (DPK) were grown in three TGCs. Four temperature treatments, Ta (near ambient temperature), Ta+1 (ambient temperature+$1^{\circ}C$), $Ta+2^{\circ}C$ (ambient temperature+$2^{\circ}C$), $Ta+3^{\circ}C$ (ambient temperature+$3^{\circ}C$), $Ta+4^{\circ}C$ (ambient temperature+$4^{\circ}C$), were established by dividing the rows along which the temperature gradient was created. In all three cultivars, beginning bloom (R1) delayed at elevated temperature in $Ta+4^{\circ}C$. In addition, the days to beginning of seed fill and maturity were longer under higher temperature. The numbers of pod, 100 seed weight, and seed yield increased at elevated temperature in DWK. In contrast, seed yield components of PSNK and DPK were reduced in $Ta+4^{\circ}C$. The results suggest that 100 seed weight and seed size of soybean was low by increased temperature in $Ta+4^{\circ}C$ of PSNK and DPK.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.45-48
• /
• 2005

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressive strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of qualify control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.75-78
• /
• 2005

This raper investigates the effect of curing temperature on strength development of concrete incorporating cement kiln dust(CKD) and blast furnace slag (BS) quantitatively. Estimation of compressive strength of concrete was conducted using equivalent age equation and rate constant model. An increasing curing temperature results in an increase in strength at early age, but with the elapse of age, strength development at high curing temperature decreases compared with that at low curing temperature. Especially, the use of 35 has a remarkable strength development at early age and even at later age, high strength is maintained due to accelerated pozzolanic activity resulting from high temperature. Whereas, at low curing temperature, the use of BS leads to a decrease in compressive strength. Accordingly, much attention should be paid to prevent strength loss at low temperature. Based on the strength development estimation using equivalent age equation, good agreements between measured strength and calculated strength are obtained.

• Mycobiology
• /
• v.32 no.1
• /
• pp.11-16
• /
• 2004

Winter mushroom, Flammulina velutipes, needs low temperature during its cultivation. To save on farm costs, especially during summer, a strain adaptable to a higher or elevated-temperature must be developed. At the start of breeding program, parental strains which could endure high temperature were obtained. Seuenty four dikaryotic strains were collected and divided into four groups according to the nature of temperature. They also had different fruiting temperature. Finally we selected three brown strains ASI 4048, 4057 and 4072, and collected their spores. These selected strains can germinate even at a high temperature of $32^{\circ}C$, which were dramatically higher than the other strains. Based on these results, the new white strain adapted to mid-temperature by backcross mating was developed. Molecular markers were applied to select white fruitbody producing strains without cultivation. They showed a specific band which co-segregated with brown fruitbody forming strains in $BC_1F_1$ progenies. Selected white strains were tested under several elevated temperature conditions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.5
• /
• pp.25-33
• /
• 2011

In this paper, the effects of aggregate and curing temperature on strength development characteristics of UP (Unsaturated Polyester)-MMA (Methyl Methacrylate) based polymer mortar under sub-zero temperature are experimentally investigated to provide a criterion for repair and production of precast products. The result showed that the setting time of the binder was 4 minutes at $20^{\circ}C$ whereas 35 minutes at $-20^{\circ}C$. The result also revealed that the compressive, flexural, and splitting tensile strengths of UP-MMA based polymer mortar significantly decreased as the aggregate and curing temperatures decreased. However, sufficient strengths which can be implemented in actual practices -36.6 MPa of compressive strength, 6.11 MPa of flexural strength, and 5.81 MPa of splitting tensile strength - were obtained even though both aggregate and curing temperatures were $-20^{\circ}C$. Strength development of polymer mortar is largely affected by curing temperature rather than aggregate temperature. It was found that the effects of aggregate temperature on strength development become smaller as the curing temperature becomes lower. Also, toughness, a ratio of compressive strength to flexural strength, increased from 3.5 to 5.9 as both aggregate and curing temperatures decreased from $20^{\circ}C$ to $-20^{\circ}C$.

• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.392-397
• /
• 2022

In order to compliant the stringent exhaust emission regulations, higher fuel efficiency and cleaner exhaust gas in combustion engines have been required. To improve combustion efficiency, an exhaust gas temperature is increasing, therefore higher temperature resistance is required for components in exhaust system, especially turbine wheel in turbocharger. IN100 looks quite attractive candidate as it has high temperature properties with low density, however it has low castability due to poor ductility at high temperature. In this study, the balance of Al and Ti composition was optimized from the base alloy IN100 to improve the high temperature ductility by expanding the γ single phase region below the solidification temperature, while obtaining the high temperature strength by maintaining the volume fraction of γ' phase equivalent to IN100 around 1000℃. Furthermore, the high temperature creep rupture life increased by adding a small amount of Ta. The alloy developed in this study has high castability, low density and high specific strength at high temperature.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.2
• /
• pp.50-53
• /
• 2016

The size of head capsule is one of the most important factors for identifying developmental stage. In order to understand the developmental characteristics of the butterfly Atrophaneura alcinous, we examined fluctuations in larval head capsule size under three different temperature conditions (20, 25, and $30^{\circ}C$) and 60% humidity. As a result, larvae developed to the fifth instar at all three temperatures. The head capsule size of larvae tended to be larger at the lowest temperature and smaller at the highest temperature. The development rate showed a regular change, consistent with Dyar's rule regarding head capsule size development. Furthermore, the development of head capsule size was found to correspond to a second degree polynomial regression better than to a linear regression. On the basis of these results, it would appear to be possible to perform an accurate assessment of instar status during the development of A. alcinous.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.654-664
• /
• 2017

The temperature profiles upon high speed impact of reactive structural materials were analyzed. A two color pyrometer, which included high-speed camera, spectral splitter, and band pass filters, was utilized to measure transient temperature profiles during and after reactive metal samples impacted into steel plate with velocities of 1600~1700 m/s. The spatial temperature distribution was analyzed from the ratio of spectral radiances at two different wavelength in infrared zone, i.e. 700 and 900 nm. The measured temperatures were calibrated with black body source. Two different types of metal samples, namely aluminum and nickel, were employed to understand reaction behavior upon the impact of samples in ambient condition. According to our experiments, the Ni sample appeared to barely react with ambient air producing an instant small fireball, while Al sample reacts violently with air generating a relatively prolong fireball.