• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.147-155
• /
• 1996

Floating Zone Image furnace with halogen lamps as heat source has been made and applied to the growth of high-Tc superconductor Bi2Sr2CaCu2O8. The manufactured crystal growth equipment is composed of holder unit for setting the halogen lamps at the focal point of the elliptical mirror, image furnace with maximum temperature of 1800℃ with 1kW halogen lamps, cooling unit, feeding unit for supplying source material to the molten zone, pulling unit for crystal growth, and the control unit in the range of 2mm/hr -40 mm/hr vertical movement and 15rpm - 12rpm rotation. Bi2Sr2CaCu2O8 fibers have been grown with 300W halogen lamps and characterized with XRD, SEM and EDS. The growth condition was air atmosphere, growth speed 3∼4mm/hr, rotation speed of upper and lower part 20∼25 rpm. The fiber was composed of 20∼25 rpm matrix phase and secondary phases such as (Sr,Ca)CuO2 and (Sr,Ca)2CuO3.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.609-616
• /
• 1995

Effects of lactate concentration, temperature, counter ions, pH as well as voltage (current) in batch electrodialysis (ED) experiments with a 3-compartment unit were investigated. The applied voltage was found to be the most critical factor as expected. The electrodialysis rate increased with the lactate concentration of the source solution. The amount of lactate transferred was limited by the lactate concentration difference between cathode and permeate compartments. The electrodialysis rate did not heavily depend on temperature change. The electrodialysis rate of NH$_{4}$-lactate was faster than that of Na-lactate and both lactates showed the highest electrodialysis rate at a pH of 4.0. A little amount of non-ionic glucose diffused through the anionic membrane to the permeate compartment. To test the effectiveness of the in situ recovery of lactic acid from fermentation broth by ED, three cases of batch culture were carried out; pH control only, ED only, and pH control and ED. The case with both pH control and ED was more efficient than that with pH control only in the aspects of productivity and product yield.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.90-93
• /
• 2009

Recently, CAN(Controller Area Network) being used in vehicle network system is suitable Network Protocol for smart vehicles with a future that need many ECUs, and it guarantees stability and reliability. It is revealed that being equipped many ECU could reduce the increasing of energy consumption and energy cost from the increasing of Wiring Harness's space and weight. In this paper, future smart vehicle control Air conditioner and heater for convenient and comfortable driving as using CAN protocol and implement auto control system According to driver's requirement using temperature in the vehicle.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.769-775
• /
• 2011

An experimental study of biofilm nitritation system for high-strength ammonium wastewater has been carried out to examine the temperature effect on different organic and solid concentration. Operating temperature varied from $35^{\circ}C$ to $15^{\circ}C$. The influent N concentration of identical three reactors was adjusted to about $300mg\;NH_4-N/L$. A control unit fed with a synthetic wastewater, while the others were fed with reject water which is consisted of the supernatant of both digester and thickener. The results indicated that nitrite accumulation was stable in temperature range of $35^{\circ}C$ to $25^{\circ}C$. However, nitritation was significantly reduced at below $20^{\circ}C$. Free ammonia (FA) and free nitrous acid (FNA) were major inhibitors to the nitrite oxidizer for nitrite accumulation in lower temperature. From the estimation of temperature coefficient (${\Theta}$) of biofilm and suspended nitritation system, biofilm nitritation system could absorb the negative temperature effect compared with suspended nitritation system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.563-570
• /
• 1985

The main purpose of this study is to evaluate a revolving plate-type biofilter system for mass culture of eels (Anguilla japonica) based on the experimental rearing for 199 days. Water quality, growth efficiency of fish and effects of fish disease control were critically evaluated. The experiment was conducted in two different units, each unit consisting of a cement tank containing $20m^3$ of water. In unit A, a biofilter which includes 400 rotating undulated P. V. C. plates being 70 cm in diameter which rotates at 6 rpm and also 400 undulated P. V. C. plates fixed in the settling chamber of an area of $66{\times}62cm$. Water was continuously passed through the filter at a rate of 260 l/min., and supplemental water was added to the fish tank at a rate of $4m^3$ a day. In unit B, the biofilter has 400 P. V. C. plates being $66{\times}62cm$ each was installed in the settling tank. The results gained from the experimental rearing for 199 days from April 21, 1984 to November 5, 1984 are as follows. In the growth experiment, the weight of fish in unit A increased from 3.0 kg to 815.6 kg, while in unit B, from 3.0kg to 416.0kg. During the period of the experiment, in the both units the fish grew at an acceptable rate at the temperature at which they were held. Observing every aspect of eel culture, including growth rate, disease control and water quality, unit A appears to have adventages over unit B, which makes it particuraly attractive in intensive recirculating fish culture system. It was further observed that certain parasites such as Trichodina sp. and Costia sp. could easily be controled by appling 4 ppm of $KMNO_4$.

• Journal of Korean Society for Quality Management
• /
• v.46 no.1
• /
• pp.169-188
• /
• 2018

Purpose: The purpose of this study is to analyze low-temperature starting performance of the light attacker and to search and improve the aircraft system including battery and Battery Charge and Control Unit(BCCU). Methods: In order to improve the starting up performance of the light attacker at low-temp, various deficiency cause were derived and analyzed using Fault Tree Analysis method. As a result, it was confirmed there were drawbacks in the charging and discharging mechanism of the battery. The inactivation of the battery's electrolyte at low-temp and the premature termination of the battery charge were the main cause. After long error and trial, we improved these problems by improving performance of battery and optimizing the charging algorithm of BCCU. Results: It was confirmed that the problems of starting up failures were solved through the combined performance test of the battery and BCCU, the ground test using the aircraft system and the operation test conducted by Korea Airforce operating unit for 3 months in winter. Conclusion: This study showed that the improvement of quality reliability was achieved and thus the start-up performance issue of the light attacker has been resolved at low temperature. And it is expected that the design methodologies of temperature-affected electrical system of aircraft will contribute to the development of the aircraft industry in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.607-610
• /
• 1995

An experiment was conducted to study the effects of Ascorbic Acid (AA) supplementations in the layer and broiler diets kept in the natural hot humid tropical climate ($20-35^{\circ}C$). The layers and the broilers were fed on normal commercial diet as control while supplementation of 400 and 600 mg/kg Ascorbic Acid made up the experimental diets. The results showed that AA supplementation in the layers significantly reduced egg weight and increased Haugh unit values of the eggs, but produced no significant effects on feed intake, body weight, egg production, respiratory rate and body temperature. The shell thickness was slightly improved, though not significantly, with AA supplementation. AA supplementation in broilers improved body weight gain and FCR and reduced the effect of heat stress as shown by lower body temperature and respiratory rates.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.191-196
• /
• 2021

In this paper, we implemented an image sensor module possible of detecting color temperature in an indoor environment. The color temperature information in the video information acquired by the image sensor was matched with a color difference illuminometer to produce an LUT. An algorithm was developed so that color temperature information according to the received RGB values can be automatically calculated. As a result of measuring the color temperature with an image sensor indoors, an accurate result of less than 5.91% was obtained compared to the reference value. It was confirmed that the uniformity of 23.5% or more was excellent compared to the color temperature measurement result using a color sensor.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.53-55
• /
• 2007

This paper describes an implementation of a wide-range dimming controller of a LED backlight for Avionics applications such as the control data unit(CDU) and multi-function display(MFD). A feedback controller using a light sensor is proposed to control the brightness in the low dimming range. The proposed controller provides an improved control performance in the wide dimming range of 1:3000 even under the temperature variations. The experimental results are provided to show the effectiveness of the proposed control system.