• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.31-45
• /
• 2000

Because of the high unit cement content in the concrete mix, major concrete temperature rises are observed in the initial stages of hardening in structural members with large cross-sections made of high-strength concrete. While this temperature rise in the initial stages of hardening contributes to the initial development of the concrete strength, it also causes thermal cracking and obstructs medium to long-term increases of the concrete strength. In the study reports below, investigations were made on the effects of the concrete temperature rise in the initial stages of hardening on the medium to long-term development of the strength of structural concrete between the ages of 28 and 91 days. In the study, comparisons were made, for example, between the compressive strength of a control specimen subjected to standard curing at 28 days and the compressive strength of core specimens taken from structural members, and observations were made on the methods of evaluating the concrete strength in structure, defined here as the compressive strength of core specimens at 91 days. The results obtained indicate that, when the maximum temperature of the concrete is the structure does not exceed $60^{\circ}C$, the concrete strength in structure at the age of long-term will generally be greater than the compressive strength of the standard-curing specimens at 28 days, allowing one to evaluate the strength of the structural concrete in terms of the compressive strength of the 28-days standard-curing specimens. When, on the other hand, the maximum temperature of the concrete in the structure exceeds $60^{\circ}C$, the strength in concrete structure may be smaller than the compressive strength of the 28-days standard-curing specimens, creating risks in the evaluation of the concrete strength in structure by latter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.681-684
• /
• 2006

Control of the temperature difference across a section is an effective way to minimize the hydration-heat-induced cracks for the structures where internal restraint is dominant. However, surface temperature may not be easily measured in situ due to the difficulty in maintaining the correct location during casting. A prediction equation for the temperature difference is proposed which can be applied without directly measuring the surface temperature if the curing condition and ambient temperature are known. Some strategies to control the temperature difference are revisited and a reasonable range of the temperature difference to minimize the crack is discussed.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.541-548
• /
• 2003

본 연구는 내한촉진제를 사용한 콘크리트의 현장 적용성을 알아보기 위한 기초적인 실험으로서, 실물부재시험을 통해 각종 양생방법에 따른 온도이력 및 강도특성을 검토하고 한중콘크리트에서 실구조물과 동일한 강도이력을 가질 수 있도록 강도관리용 공시체의 적정 양생방법을 평가하기 위한 것이다. 실물부재시험에서 양생방법에 따른 온도이력은 일반콘크리트(단열양생), 일반콘크리트(급열양생), 내한촉진제 콘크리트 및 일반콘크리트(양생막 양생) 순으로 크게 저하하는 경향을 보이고 있었다. 강도특성은 양생조건이 열악한 양생막 내 외부에서의 일반콘크리트 공시체의 경우에는 초기동해에 따른 강도발현 저하를 보인 반면에 내한촉진제 콘크리트의 경우에는 재령이 경과할수록 계속적인 강도발현을 보이고 있어 내한촉진제의 사용에 따른 동결온도 저하효과 및 저온환경하에서의 경화촉진효과를 나타내고 있었다. 한중콘크리트의 강도관리용 공시체의 적정 양생방법을 검토한 결과, 부재 내부에 매립하여 양생한 경우 및 간이단열양생을 실시한 경우에 있어서의 구조체 콘크리트와의 온도이력은 다소 차이를 나타내고 있지만, 코어강도와는 비교적 근사하게 나타나고 있어 구조체 강도평가를 위한 이들 양생방법의 유효성을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.113-118
• /
• 2004

This study is a basic experiment on quality management of the compression strength of high strength concrete, aiming. at quality management of high strength mass concrete by giving the temperature hysteresis of the mass test pieces to managerial test pieces. Different from ordinary concrete, high strength concrete generally shows the temperature high rising caused by hydration heat inside the concrete. It is known that, in mass concrete, thermal stress occurs due to the difference in temperature between the inside and the outside, which causes a significant difference in compression strength between structure beams and managerial test pieces. It is also reported that there is a large difference between the compression strength of cylindrical managerial test pieces of standard underwater curing and the strength of structure beam concrete. Thus, this study made concrete test pieces in an optimal mix ratio for each strength level, and also created thermal insulation curing box and managerial test pieces. Then it carried out comparative analysis in relation to core strength and suggested equipment and a technique that can control the strength of high strength concrete mass more conveniently and accurately.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.95-101
• /
• 2009

Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

• 한국연초학회지
• /
• 제7권2호
• /
• pp.129-139
• /
• 1985

cent was carried out to study on the effect of temperature and humidity to chemical tobacco leaves during the yellowing stage. The results were follows : In the condition of high humidity and low temperature, yellowing time was delayed ; leaf color appeared lack clearness. In the higher temperature and the lower humidity during the yellowing stage : total sugar, reducing sugar and malic acid content were increased. Decomposition of nitrogenous components elevated in $38^{\circ}C$, 85%RH. Changes of total nitrogen content correlated with total curing time. Adecrease of linolenic acid with a corresponding increase of chlorogenic acid proceeded in the condition of low temperature and high humidity. In a view of tobacco quality by chemical components, the low temperature and high humidity during the yellowing stage decreased quality of tobacco leaves. It is considered to control of the proper condition of temperature and humidity during the yellowing.

• 한국초지조사료학회지
• /
• 제16권4호
• /
• pp.315-326
• /
• 1996

An experiment was carried out to determine effect of cultivar, drying agent concentration and preservative on the moisture content, temperature and quality changes of fall harvested oat(Avena sativa L.) hay during field curing and storage. The main plots consisted of the cultivar such as 'Foothill' and 'Swan', the subplots consisted of drying agent concentration such as 7Skg/ha(C1), lOSkglha(C2) and control(C0) and the sub-subplots consisted of preservative such as buffered acid(BA), lactic bacteria inoculant(LB) and control(C0). Moisture contents of 'Foothill' and 'Swan' oat cultivar at harvest were 635.5 and 385.4%DW(Dry weight), respectively, but the final moisture contents of the oat cultivars were 117 and 86%DW. The moisture content of cut oat was not affeded by drying agent concentration. Core temperature of baled 'Swan' oat hay was a little higher than that of 'Foothill' and no consistent preservative effect was found. Total nitrogen content of 'Swan' oat hay was 3.08% and that of 'Foothill' oat hay was 3.45%(P<0.05). Drying agent treatment increased total nitrogen content of 'Swan'(P <0.05), but preservative had no effect. Crude fiber content of oat cultivar was increased as the curing progressed(P<0.05) and the difference of crude fiber content of oat cultivar was maintained through the whole curing period. Effect of drying agent concentration on crude fiber content was not found after preservation. Crude fiber content of 'Swan' oat hay was higher than that of 'Foothill' by 1.O% in ADF and 3.1 % in NDF(P<0.05). No preservative effect was found in crude fiber content. According to RFV of oat cultivar at harvest, forage quality of 'Foothill' and 'Swan' was Prime and Grade 1, respectively, but that of both cultivm was above Grade 2 at the final curing day. RFV of the stored 'Foothill' and 'Swan' oat hay was 122 and 114(P<0.05), respectively, and the quality of oat hay was classified as Grade 1 and 2, respectively, according to the forage quality standard assigned by AFGC.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.15-18
• /
• 2006

The test result of mat concrete applying both hydration heat difference and insulation curing method on new construction of Cheongju university educational building are summarized as following. Both fresh concrete and compressive strength properties were satisfied In aimed value. Setting time of concrete incorporating 15% of fly ash(FA) retarded 1.2 hour than control concrete. Temperature history of mali concrete indicated that the highest temperature of center was exhibited at $126^{\circ}C$ after 51 hours while the highest temperature of upper section was $10.6^{\circ}C$ after 46 hours. Temperature Difference between center and surface was managed at less than $6^{\circ}C$ during whole curing period. In addition the temperature of upper section secured more than $3.3^{\circ}C$ while the temperature of outside was indicated at less than $-10^{\circ}C$. Maturity by parts of construction secured more than $30^{\circ}C$ DD higher than outside at 3 days. The more number of times, applying insulation curing method by double bubble sheets, increased, the higher economic effect was secured. Overall it was clear that applying both double bubble sheets and hydration heat difference method on this new construction can resist hydration heat crack, early frost demage and strength decrease. It also significantly contributed quality improvement of cold weather concreting

• 콘크리트학회지
• /
• 제7권6호
• /
• pp.167-175
• /
• 1995

본 연구에서는 매스콘크리트 양생시 수화열에 의한 온도 상승을 예측할 수 있는 온도해석 프로그램 $\boxDr$TAMCON$\boxUl$을 개발하였다. 수치해석 방법으로는 복잡한 형태를 지니고 다양한 경계조건을 만족시켜야 하는 구조물에 대한 온도해석을 용이하게 하기 위하여 유한요소법이 채택되었다. $\boxDr$TAMCON$\boxUl$의 타당성을 검증하기 위하여 벽상구조물과 기초매트에 대하여 이미 문헌에 보고된 수치해석 및 실험치를 본 연구의 해석 결과와 비교한 바 이들이 서로 잘 일치하고 있음을 확인하였다. $\boxDr$TAMCON$\boxUl$은 콘크리트 구조물의 온도균열 방지를 위한 온도제어 및 필요한 양생방법의 도입을 위한 시공관리에 효과적으로 활용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.816-818
• /
• 1998

In this paper Polyimide(PI) thin film are fabricated by vapor deposition polymerization(VDP) of dry process which are easy to control the film's thickness and hard to pollute due to volatile solvent. The FT-IR spectrum show that PAA thin films fabricated by VDP are changed to PI thin film by thermal curing. From AFM(Atomic Force Microscopy) experimental as the higher curing temperature. the thin film thickness decreases and roughness decresse.