• 제목/요약/키워드: Temperature calibration

검색결과 516건 처리시간 0.026초

평위산 전탕팩의 장기보존 시험에 따른 유통기한 설정 (Estimation of shelf-life by long-term storage test of Pyungwi-san)

  • 서창섭;김정훈;임순희;신현규
    • 대한한의학방제학회지
    • /
    • 제19권1호
    • /
    • pp.183-194
    • /
    • 2011
  • Objectives : To estimate the shelf-life by long-term storage test of Pyungwi-san. Methods : Experiments were conducted to evaluate the stability such as the selected physicochemical, heavy metal, microbilogical experiment under an acceleration test and long-term storage test of Pyungwi-san in different storage under room temperature, refrigeration and freezing. Futhermore, HPLC analysis was performed for the determinations of glycyrrhizin in the Pyungwi-san on an Inertsil ODS-3 column(250 mm ${\times}$ 4.6 mm, 5 um) using solvent 35% acetonitrile include 0.05% phosphoric acid at 254 nm. The flow rate was 1.0 mL/min. Results : The significant change was not showed in pH, heavy metal, microbiological, identification test and quantitative analysis based on acceleration test and long-term storage test. Retention time of glycyrrhizin in HPLC chromatogram was about 16.065 min and calibration curve showed good linearity($R^2$ = 0.9999). The contents of glycyrrhizin in acceleration test and long-term storage test were 0.068~0.076 mg/mL and 0.066~0.077 mg/mL, respectively. Shelf-lifes of room temperature, refrigeration and freezing by long-term storage test were predicted 41, 24 and 34 months, respectively. Conclusions : The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

Determination of Non-Steroidal Anti-Inflammatory Drugs in Human Urine Sample using HPLC/UV and Three Phase Hollow Fiber-Liquid Phase Microextraction (HF-LPME)

  • Cha, Yong Byoung;Myung, Seung-Woon
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권11호
    • /
    • pp.3444-3450
    • /
    • 2013
  • Three phase hollow fiber-liquid phase microextraction (HF-LPME), which is faster, simpler and uses a more environmentally friendly sample-preparation technique, was developed for the analysis of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) in human urine. For the effective simultaneous extraction/concentration of NSAIDs by three phase HF-LPME, parameters (such as extraction organic solvent, pH of donor/acceptor phase, stirring speed, salting-out effect, sample temperature, and extraction time) which influence the extraction efficiency were optimized. NSAIDs were extracted and concentrated from 4 mL of aqueous solution at pH 3 (donor phase) into dihexyl ether immobilized in the wall pores of a porous hollow fiber, and then extracted into the acceptor phase at pH 13 located in the lumen of the hollow fiber. After the extraction, 5 ${\mu}L$ of the acceptor phase was directly injected into the HPLC/UV system. Simultaneous chromatographic separation of seven NSAIDs was achieved on an Eclipse XDB-C18 (4.6 mm i.d. ${\times}$ 150 mm length, 5 ${\mu}m$ particle size) column using isocratic elution with 0.1% formic acid and methanol (30:70) at a HPLC-UV/Vis system. Under optimized conditions (extraction solvent, dihexyl ether; $pH_{donor}$, 3; $pH_{acceptor}$, 13; stirring speed, 1500 rpm; NaCl salt, 10%; sample temperature, $60^{\circ}C$; and extraction time, 45 min), enrichment factors (EF) were between 59 and 260. The limit of detection (LOD) and limit of quantitation (LOQ) in the spiked urine matrix were in the concentration range of 5-15 ng/mL and 15-45 ng/mL, respectively. The relative recovery and precision obtained were between 58 and 136% and below 15.7% RSD, respectively. The calibration curve was linear within the range of 0.015-0.96 ng/mL with the square of the correlation coefficient being more than 0.997. The established method can be used to analyse of NSAIDs of low concentration (ng/mL) in urine.

흑연로 원자 흡수흡광법에 의한 고순도 구리 합금중의 안티몬의 직접 분석 방법 (Direct Determination Method of Antimony in High Purity Copper Metal by Graphite Furnace Atomic Absorption Spectrometry)

  • 유광식;경종대;권진기;이중주
    • 대한화학회지
    • /
    • 제39권4호
    • /
    • pp.252-256
    • /
    • 1995
  • 고순도 구리 금속중에 존재하는 미량의 안티몬을 사전 분리시키지 않고 직접 분석할 수 있는 GFAAS 조건을 조사하였다. 과량 존재하는 구리가 안티몬의 감도를 향상시키는 matrix modifier의 역할을 하고 있음을 알았다. 희화 온도는 $600^{\circ}C(20s){\sim}700^{\circ}C(10s)$를 이용할 때에 $1000^{\circ}C(20s){\sim}1100^{\circ}C(10s)$보다 감도가 향상되며, 원자화 온도는 $2200^{\circ}C$에서 가장 좋은 Sb의 흡광도를 보였다. Ar 기체의 압력은 $2.0\; kg/cm^2$일때에 최적임을 확인하였으며, 20 ppb에서 200 ppb Sb 범위에서 변화율(coefficient of variation)이 5% 미만이며 직선 관계를 보였다.

  • PDF

주기적인 반복 열하중에 노출된 광섬유 센서의 신뢰성 평가 (Reliability Evaluation of Fiber Optic Sensors Exposed to Cyclic Thermal Load)

  • 김헌영;강동훈;김대현
    • 비파괴검사학회지
    • /
    • 제36권3호
    • /
    • pp.225-230
    • /
    • 2016
  • 광섬유 브래그 격자센서(FBG)는 다중화가 용이하고 절대측정이 가능한 고유의 장점으로 다양한 구조물의 구조건전성 모니터링(SHM)에 활용도를 넓혀가고 있다. 하지만, 구조건전성 모니터링을 위해 FBG 센서를 온도 변화 환경에서 장기간 사용할 경우 FBG 센서는 계절적 요인에 의한 큰 폭의 주기적 온도 변화 환경에 노출되므로 센서의 신뢰성 확보를 위해 신호 특성에 대한 검토가 필요하다. 본 연구에서는 패키징된 FBG 센서의 제작에 많이 활용되는 각각 2가지의 모재 및 접착제를 대상으로 시편을 제작한 후 항온항습기 내에서 -$20^{\circ}C{\sim}60^{\circ}C$의 온도 조건에서 300사이클의 반복 열하중시험을 수행하였다. 시험 결과, FBG 센서에 주기적인 반복 열하중이 가해질 경우 일정량의 압축변형이 작용하며 이는 센서로 사용 시 측정 오차로 작용하므로 장기 구조건전성 모니터링을 위해 FBG 센서의 사용 전 안정화 과정을 통한 사전보정이 필요함을 확인하였다.

현장관측용 분광 광도계의 상대 검교정 시스템 개발 (Development of relative radiometric calibration system for in-situ measurement spectroradiometers)

  • 오은송;안기범;강혁모;조성익;박영제
    • 대한원격탐사학회지
    • /
    • 제30권4호
    • /
    • pp.455-464
    • /
    • 2014
  • 천리안해양관측위성(Geostationary Ocean Color Imager, GOCI)이 2010년 6월에 발사된 이후, 영상 자료의 보정과 검증을 위한 여러 차례의 현장 관측이 한반도 주변에서 수행되었다. 한국해양과학기술원 해양위성센터(Korea Ocean Satellite Center, KOSC)에서는 Analytical Spectral Devices (ASD)사의 분광 광도계 FieldSpec3나 TriOS사의 분광 광도계 RAMSES와 같은 현장관측장비의 특성 변화를 확인하기 위하여 미국국립표준기술원(National Institute of Standards and Technology, NIST)의 표준화 절차를 거친 광원과 표준 분광 광도계를 이용하여 각각의 현장 관측 마다 기기의 성능을 측정하였다. 본 논문에서는 해양위성센터에 구축된 광학 실험실과 현장관측 분광 광도계의 상대적 복사 검교정 방법에 대해서 소개하고 있다. 광학 실험실은 98% 이상의 광원 균질성을 지니는 20인치 적분구(USS-2000S, LabSphere)와 360 nm 부터 1100 nm 까지 1.6 nm 파장 간격으로 측정이 가능한 표준 분광 광도계(MCPD9800, Photal), 그리고 ${\pm}0.1mm$의 편평도를 가지는 광학테이블($3600{\times}1500{\times}800mm^3$)을 기본으로 구성되어 있다. 실험실 내부는 정확한 검교정 실험을 위하여 일정한 온습도를 유지하고 있으며, 동일한 광원에 동일한 위치에서 표준과 현장관측용 분광 광도계를 동시에 측정하는 방법을 기본으로 한다. 해양위성센터가 보유하고 있는 ASD 를 측정한 결과, 현장관측용 분광광도계의 결과가 푸른 가시광 영역에서 미세한 차이가 측정 시 마다 나타나는 것을 확인하였고, 더불어 1년간의 상대 검교정 실험에 따르면 평균적으로 4.41% 정도의 파장별 광특성이 변화하는 것을 확인하였다. 이러한 결과는 측정 정확도를 유지하고, GOCI 자료의 신뢰도를 확보하기 위하여 지속적인 검교정 실험을 수행해야 하는 이유를 보여주고 있다.

원격탐사를 이용한 대형 수체의 수질 모델 검증 효과 제고 방안에 관한 연구 (Application of Remote Sensing Technique to Enhance the Water Quality Model Validation in a Large Water Body)

  • 임현주;최정현;박석순
    • 대한환경공학회지
    • /
    • 제28권4호
    • /
    • pp.447-452
    • /
    • 2006
  • 대형 수체의 수질 모델 검증 효과를 향상시키기 위하여 원격탐사 기술이 적용되었다. 인공위성 영상은 대형 수체의 넓은 표면을 한꺼번에 파악할 수 있으므로 모델의 보정 및 검증에 사용되는 관측 자료의 부족함을 보완할 수 있다. 이 논문은 2000년 4월 29일과 9월 4일에 촬영된 Landsat FTM+영상을 분석하여 팔당호 표층 수온 검증 연구를 제시하고 있다. 영상으로부터 계산된 수온과 모델의 표층 수온의 자료를 획득하여 3가지 방법으로 영상에 의한 수온과 모델의 결과를 비교하였다. 4월 29일 영상의 경우 모델 결과를 기준으로 오차율이 0.13이며 9월 4일에는 오차율이 0.04로 모델의 표층 수온이 영상으로부터 계산된 수온과 잘 일치함을 알 수 있다. 그러나 영상촬영 시점의 대기의 간섭을 고려하지 못한 것이 4월 29일 결과의 오차를 발생시킨 주요 원인으로 사료된다. 그러므로 정확한 수질자료를 얻기 위해서는 영상촬영 시점의 대기의 효과를 고려한 대기보정이 필요할 것이라 사료된다.

휘발성 원소들의 원자흡수 분광분석을 위한 매트릭스 개선에 관한 연구(제2보). 전열 원자화에 의한 흔적량 게르마늄의 정량 (Matrix Modification for Atomic Absorption Spectrophotometric Determination of Volatile Elements (Ⅱ). Determination of Trace Germanium by Electrothermal Atomization)

  • 최호성;최종문;김영상
    • 대한화학회지
    • /
    • 제40권2호
    • /
    • pp.109-116
    • /
    • 1996
  • 물시료 중 존재하는 흔적량 게르마늄을 전열 원자흡수 분광광도법으로 정랑하기 위해 사용되는 매트릭스 개선제의 종류와 사용량, 이에 따를 회화 및 원자화 온도의 변화, 보조제의 사용여부 및 양에 관하여 연구하였다. 게르마늄은 회화단계에서 이산화 게르마늄이 흑연로 성분인 탄소로 인해 휘발성 일산화 게르마늄으로 환원되에 감도 및 재현성을 저하시킨다. 따라서 개선제를 사용하여 게르마늄을 열적 및 화학적으로 안정화시켜야 한다. 이를 위해 단일 개선제를 사용할 경우 파라듐이 가장 좋은 효과를 나타내었다. 이 경우 원자화온도는 변화시키지 않지만, 회화온도는 800.deg.C에서 1, 000.deg.C로 올릴수 있었고 흡광도도 증가하였다. 이런 조건에서 팔라듐의 농도가 게르마늄에 대해 몰비로 14-100인 10-70.mu.g/mL까지 흡광도가 일정하였다. 보조개선제의 사용도 검토하였는데, 1% 수산화암모늄을 가하여 회화온도를 1, 000.deg.C까지 증가시켰다. 이제까지 검토한 최적조건을 바탕으로 광천수 3가지를 분석한 결과 게르마늄이 2.46, 1.60 및 0.020.mu./mL이었다. 끝으로, 시료에 일정량의 게르마늄을 첨가하여 얻은 회수율은 모두 95%이상으로 정량적이라고 할 수 있고, 검출한계는 6.9ng/mL로 흔적량 게르마늄 분석에 유용한 것으로 판단되었다.

  • PDF

고랭지 농경지의 토양유실모의를 위한 SWAT 모형의 적용성 평가 (Evaluation of SWAT Applicability to Simulate Soil Erosion at Highland Agricultural Lands)

  • 허성구;김기성;사공명;안재훈;임경재
    • 농촌계획
    • /
    • 제11권4호
    • /
    • pp.67-74
    • /
    • 2005
  • The Doam watershed is located at alpine areas and the annual average precipitation, including snow accumulation, is significant higher than other areas. Thus, pollutant laden runoff and sediment discharge from the alpine agricultural fields are causing water quality degradation at the Doam watershed. To estimate soil erosion from the agricultural fields, the Universal Soil Loss Equation (USLE) has been widely used because of its simplicity to use. In the early spring at the Doam watershed, the stream flow increases because of snow melt, which results in erosion of loosened soil experiencing freezing and thaw during the winter. Also, extremely torrential rainfall, such as the typhoons 'RUSA' in 2002 and 'MAEMI' in 2003, caused significant amounts of soil erosion and sediment at the Doam watershed. However, the USLE model cannot simulate impacts on soil erosion of freezing and thaw of the soil. It cannot estimate sediment yield from a single torrential rainfall event. Also, it cannot simulate temporal changes in USLE input parameters. Thus, the Soil and Water Assessment Tool (SWAT) model was investigated for its applicability to estimate soil erosion at the Doam watershed, instead of the widely used USLE model. The SWAT hydrology and erosion/sediment components were validated after calibration of the hydrologic component. The R$^2$ and Nash-Sutcliffe coefficient values are higher enough, thus it is found the SWAT model can be efficiently used to simulate hydrology and sediment yield at the Doam watershed. The effects of snow melt on SWAT estimated stream flow and sediment were investigated using long-term precipitation and temperature data at the Doam watershed. It was found significant amount of flow and sediment in the spring are contributed by melting snow accumulated during the winter. Two typhoons in 2002 and 2003, MAEMI and RUSA, caused 33% and 22% of total sediment yields at the Doam watershed, respectively. Thus, it is recommended that the SWAT model, capable of simulating snow melt, sediment yield from a single storm event, and long-term weather data, needs to be used in estimating soil erosion at alpine agricultural areas to develop successful soil erosion management instead of the USLE.

$^{90}Sr$ 방사성 동위원소를 이용한 전리함의 대기 보정계수 측정 (Air Density Correction of Ionization Chamber using $^{90}Sr$ Radioactive Check Device)

  • 박성용;김우철;신동오;지영훈;권수일;이길동;조영갑;노준규
    • Journal of Radiation Protection and Research
    • /
    • 제23권4호
    • /
    • pp.267-271
    • /
    • 1998
  • 전리함을 사용한 흡수선량 측정시 대기 보정계수의 측정은 필수적인 요소이다. 일반적으로는 기압계 및 온도계를 이용하여 대기 보정계수를 얻고 있는데 본 실험에서는 $^{90}Sr$ 방사성 등위원소를 사용하여 보정계수를 얻고 그 값들을 비교하고자 한다. PTW 사의 Radioactive Check Device, Unidos Elecetrometer 및 0.6 co Ion Chamber를 이용하여 각각의 다른 환경 조건하에서 대기 보정계수를 구하고 온도계와 기압계를 사용하여 구한 대기 보정계수를 비교해 본 결과 그들은 0.2 % 이내로 잘 일치가 되었다. 이론적으로 온도계 및 기압계를 사용할 경우 전체 선량의 불확정도는 ${\pm}$1.2 - 1.6 % 인데 반하여 $^{90}Sr$ 방사성 동위원소를 사용할 경우 전체 선량의 불확정도는 ${\pm}1.02%$로 계산할 수 있다. $^{90}Sr$ 방사성 동위원소를 사용한 방법은 온도계 및 기압계의 정기적인 검교정이 없을 경우 발생할 수 있는 오차를 줄일 수 있으며 보다 정확한 보정계수를 얻을 수 있다.

  • PDF

과학위성용 자력계 탑재체 개발에 관한 연구 (DEVELOPMENT OF A FLUXGATE MAGNETOMETER FOR THE KITSAT-3 SATELLITE)

  • 황승현;이동훈;민경옥;신영훈;이대희;최정림
    • Journal of Astronomy and Space Sciences
    • /
    • 제14권2호
    • /
    • pp.312-319
    • /
    • 1997
  • 과학적 목적으로 탑재되는 자력계(magnetometer)는 지구 근접 우주환경을 관측하는데 있어서 필수적인 탑재 체이다. 우주환경의 직접적인 전자기적 변화는 자기장과 전기장의 측정으로 알 수 있다. 실제 관측에 있어서 전기장의 관측은 기술적으로 어렵지만 자기장은 비교적 관측이 용이하다. 따라서 자기장을 측정하는 자력계는 과학위성의 기본적인 탑재 체들의 하나로 인식되어왔다. 본 연구에서는 1998년 7월경에 발사 예정인 우리별 3호의 과학 탑재체인 fluxgate 자력계를 개발한 결과를 보고한다. 우리별 1, 2호에 탑재된 자력계는 단순히 위성의 자세 제어를 위해 제작되었으나, 우리별 3호에서는 자세 제어뿐만 아니라 우주과학 적인 측정을 위한 자력계가 탑재될 예정이다. 우리별 3호는 1998년 7월경에 발사 예정이며 고도는 720km, 궤도는 원형 태양 동기 궤도, 무게는 약 100kg, 전력은 최대 150W이다. 그리고 과학 탑재 체로는 우주복사영향 측정기(Radiation Effect Microelectronics), 고 에너지 입자 검출기 (High Energy Particle Telescope), 정밀 자력계(Scientific Magnetometer), 전자 온도 측정기(Electron Temperature Probe)가 있다. 우리별 3호에 탑재 예정인 정밀 자력계는 기본적으로 우리별 1, 2호에 탑재된 자력계의 회로를 추가 보정 하여 넓은 우주 공간에서 일어나는 자기장 변화 현상을 관측하기에 적절한 분해능인 5nT를 기준으로 개발하였다. 일본의 자력계 전문 회사인 Tierra Tecnica사에서 자력계의 보정(calibration)과 잡음 레벨 시험(noise level test)을 수행하였다.

  • PDF