• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.117-127
• /
• 1997

To maintain the reasonable temperature in the engine is very important to keep the steady combustion state of engine and to prevent increasing of lubricant consump- tion, deteriorating of lubricant, shortening of the life time of engine and decreasing of material strength. The method of energy balance for devided elements of radiator is considered to analyse the performance of radiator. Th data of engine test and vehicle cooling tunnel test are applied to program for calculation of radiator outlet temperature, and this result is compared with outlet temperature of vehicle cooling tunnel test. As a result, the radiator outlet temperature by numerical analysis agrees well with that by experiment. It is concluded that this simulation program is available in developing the cooling system for a new car.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.47-53
• /
• 2004

Water vapor is an important parameter in monitoring changes in the Earth's climate and it can be used to improve weather forecasting However, it haven't observed accurately by reasons of structural and economic problem of observation. GPS meteorology technique for precipitable water vapor measurement is currently actively being researched an advanced nation. Main issue of GPS meteorology is an accuracy of PWV measurement related weighted mean temperature and meteorological data. In this study, the korean weighted mean temperature had been recalculated by a linear regression method based on meteorological observations from 6 radiosonde stations for 2003 year. We examined the accuracy of PWV estimates from GPS observations and Radiosonde observations by new korean weighted mean temperature and others.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.223-228
• /
• 2009

Cooling and heating equipments of railroad passenger cabin is one of the most important part in keeping the good thermal comfort of the passengers. The bad performance of these equipments usually results in the comfort of the passengers. However, there is no testing method for cooling and heating equipments during manufacturing the passenger car, and calculation method is frequently used. Many railroad operators spend a lot of money for the maintenance. In this study, a new environmental performance test for railroad passenger cabin was suggested. The temperature of the chamber will be changed from $-40^{\circ}C$ to $60^{\circ}C$. The performance test of cooling and heating equipment in controlling the passenger cabin temperature was carried out under various temperature condition. The testing method to investigate the effect of artificial sunlight irradiation on the passenger cabin temperature was also suggested.

• 연구논문집
• /
• 통권33호
• /
• pp.17-25
• /
• 2003

In this work, thermal design of a PCR chip for LOC is systematically conducted. From the numerical simulation of a PCR chip based on the finite volume method, how to control the average temperature of a PCR chip and the temperature difference between the denaturation zone and the annealing zone is presented. The average temperature is shown to be controlled by adjusting heat input and a cooler as well as a heater is shown to be necessary to obtain three individual temperature zones for polymerase chain reaction. To reduce the time required, a heat sink for the cooler is not included in the calculation domain for the PCR chip and heat sink design is conducted separately by using a compact modeling method, the porous medium approach.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.666-671
• /
• 1998

Computational fluid dynamics(CFD) code FLUENT[11 was used to simulate the thermal hydraulic processes occuring in conceptual design of the accelerator-driven subcritical reactor(ADSR) liquid lead target. The purpose of the analysis is to investigate the thermal hydraulic characteristics of liquid lead as ADSR target material with various target geometries and injection locations of proton beam. In the calculation analysis, the local temperature of the liquid lead target rises to the boiling temperature very rapidly When the proton beam is injected from the bottom of the target system, the duration time to reach the boiling temperature is longer and the temperature distribution is flatter than other cases.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.159-168
• /
• 2005

In recent studies, it was reported that there existed the temperature discontinuity at a liquid-vapor interface in an equilibrium state. However, from the viewpoint of the classical thermodynamics, it is highly questionable result although considering that the experiments related with a boundary layer is very difficult due to the extremely thin thickness of it. To clarify whether the temperature discontinuity over a liquid-vapor interface really exists, the computer simulations were performed. From the simulation results, it could be concluded that the misconception in a temperature calculation might result in non-uniform temperature distributions over an interface under an equilibrium state.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.944-951
• /
• 2016

Resistance temperature detectors (RTDs) and thermocouple sensors are broadly used to measure temperatures in the engineering and research fields. The contents of this standard calibration procedure (SCP) describe procedures related to the calculation of an electrical temperature calibrator and show different ways to indicate the calibration results, such as measurement uncertainty. As an SCP for the electrical temperature calibrator has not been developed yet, we studied the SCP and found a solution to this problem. In this paper, we present a mathematical model of the data and measurement variations with the calibration data results.

• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.14-24
• /
• 2005

A propellant mainly consisting of nitric ester including nitrocellulose, nitroglycerine and nitroguanidine is characteristic of being decomposed naturally. And this phenomenon is known as being affected mostly by its storing temperature. In this research, the effect of storing temperature on self life has been studied by measuring the contained quantity of residual stabilizer of propellant KM30A1, ignition powder and combustible cartridge case, which are parts of 155MM propelling charge K676 and K677; the method for the measurement is acceleration aging test, and decomposition reaction equation and Berthlot Equation were used for the calculation. The result of this research shows that propellant KM30A1, ignition powder, combustible cartridge case in order of decreasing self life, and the self life decreases to 1/3 as the temperature increases by $10^{\circ}C$.

• 한국전산유체공학회지
• /
• 제16권3호
• /
• pp.47-51
• /
• 2011

Dark Mura phenomena which can happen at the region with high temperature gradient in a Notebook LCD Monitor using LED light source has numerically been studied. The calculation was conducted under the nearly realistic conditions by considering the anisotropic thermal properties of materials and the real dimensions of each component. The two performance indices of LED monitor, i.e., the maximum temperature and the spacial gradient of temperature were examined for the various shapes, lengths and thickness of heat sink plate. Calculated results give more reasonable temperature distribution comparing with experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.63-66
• /
• 2001

Photovoltaic System does military exploit that use heliometer light and is clearness source of energy. Photovoltatic System is no noise, shock among is several Substitute energy and after establishment maintenance having simple special quality, is applied in many fields. However, while Photovoltatic System is having these advantage, but react sensitively in effect of Photovoltaic scanning Quantity, temperature change etc.. surrounding environment, when did not satisfy condition, express indefinite output price. Consider voltage$\cdot$current output measurement value and temperature revision calculation by temperature change of existing photovoltaic system and change of output price of when did Simulation analyzed comparison.