• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.13-23
• /
• 2006

A propellant mainly consisting of nitric ester including nitrocellulose and nitroglycerine is characteristic of being decomposed naturally. And this phenomenon is known as being affected mostly by its storing temperature and humidity. In this research, the effect of storing temperature and humidity on self life has been studied by measuring the contained quantity of residual stabilizer of propellant KM30Al, which are parts of 155MM propelling charge K676 and K677; the method for the measurement is acceleration aging test, and decomposition reaction equation, Eyring Equation and Berthlot Equation were used for the calculation. As result of this study, it was found that the storing temperature influenced seven times as large as the storing humidity upon the self life of the propellant KM30Al, Furthermore, especially in the high temperature region, the storing temperature had a dominant effect on the self life.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.97-104
• /
• 2003

The surface temperature at the interface of bodies in a sliding contact is one of the most important factors influencing the behavior of machine components. So the calculation of the surface temperature at a sliding contact interface has long been an interesting and important subject for tribologist. In this study to verify estimation of temperature rising, calculated temperatures were compared with measured temperatures. It is possible to calculate bulk and flash temperature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권11호
• /
• pp.566-571
• /
• 2004

Pulse modulation technique provide additional controling method for electron temperature and density in rf and microwave processing plasma. Transient characteristics of electron density and temperature have been measured in pulse modulated rf inductively coupled argon plasma using simple probe circuit. Electron temperature relaxation is clearly identified in the after glow stage. Controllability of average electron temperature and density depends on the modulation frequency and duty ratio. Numerical calculation of time-dependent electron density and temperature have been performed based on the global model. It has been shown that simple langmuir probe measurement method used for continuous plasma is also applicable to time-dependent measurement of pulse modulated plasma.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.361-364
• /
• 2005

In this paper, surface temperatures of ZnO arresters as a function of ambient temperatures and leakage currents were experimentally investigated. The variations of the leakage current was below 10 uA, which comes about $4.5\%$ of the normal leakage current. Temperature differences between the ambient and the surface of arresters were not shown until $150\%$ to the normal leakage current, and were remarkable over $200\%$. From the results, we deduced a couple of polynomials which enables the calculation of the leakage current by the measurement of surface temperature. Tests on used arresters have shown the same results as the experimental one. Also, we expect that an arrester diagnosis is possible by measuring the surface temperature of them after more studies on the effect of wind, moisture penetration, and arrester types.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.133-152
• /
• 2015

Mathematical model has been developed for determination of temperature field in multilayer pavement and subgrade, which considers transfer of heat by conduction and convection, receiving of heat from total solar radiation and atmosphere emission, output of heat due to the emission from the surface of pavement. The developed model has been realized by the finite element method for two dimensional problem using two dimensional second order finite element. Calculations for temperature field have been made with the programme realized on the standard mathematical package MATLAB. Accuracy of the developed model has been evaluated by comparison of temperatures, obtained theoretically and experimentally. The results of comparison showed high accuracy of the model. Long-term calculation (within three months) has been made in pavement points in accordance with the data of meteorological station for air temperature. Some regularities have been determined for variation of temperature field.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.126-129
• /
• 2002

레이저 다이오드의 동작 수명을 예측하고 안정화된 성능과 신뢰도를 만족하기 위해서는 검증된 시스템으로 광부품의 신뢰성 테스트를 수행하는 것이 중요하다. 본 연구에서는 온도와 인가 전류에 따른 접합 온도(junction temperature) 특성을 관찰하여 실제 주위 온도 ( $T_{A}$)와 광소자의 온도( $T_{j}$) 차이를 이론 및 실험 적으로 도출하였고, 이를 토대로 정밀한 burn-in 테스트를 위한 screening 조건을 설정해 제시하였다.하였다.

• 지구물리
• /
• 제9권1호
• /
• pp.27-36
• /
• 2006

연직 공기 기둥에 대한 복사 및 대류 과정이 포함된 일차원 복사-대류 평형 모형을 구축하였고, 이 모형을 이용하여 남극 세종기지에서 복사-대류 평형 온도를 계산 하고 분석하였다. 이 모형의 반응도에서 지표면 알베도와 태양 천정각의 코사인 및 이산화탄소 증가는 지표면에서의 복사-대류 평형 온도를 감소시켰다. 그리고 구름 광학두께가 비교적 큰 하층운은 지표면 온도를 감소시키나, 구름 광학두께가 작은 상층운은 온실효과 때문에 지표면 온도를 증가시켰다. 남극 세종기지의 44년 (1958∼2001)의 기간에 대하여 계산된 지표면에서의 복사-대류 평형 온도의 연변화는 0.012oC/년이었다. 마찬가지로 13년 동안(1989∼2001)의 자료에 대한 복사-평형 온도 변화는 0.01oC/월이었으며, 동일한 기간의 관측 자료 분석 결과로는 0.005oC/월의 변화를 나타내었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.82-89
• /
• 2011

Understanding snowmelt movement to the watershed is crucial for both climate change and hydrological studies because the snowmelt is a significant component of groundwater and surface runoff in temperature area. In this work, a new energy balance budget algorithm has been developed for melting snow from a snowpack at the Central Sierra Snow Laboratory (CSSL) in California, US. Using two sets of experiments, artificial rain-on-snow experiments and observations of diel variations, carried out in the winter of 2002 and 2003, we investigate how to calculate the amount of snowmelt from the snowpack using radiation energy and air temperature. To address the effect of air temperature, we calculate the integrated daily solar radiation energy input, and the integrated discharge of snowmelt under the snowpack and the energy required to generate such an amount of meltwater. The difference between the two is the excess (or deficit) energy input and we compare this energy to the average daily temperature. The resulting empirical relationship is used to calculate the instantaneous snowmelt rate in the model used by Lee et al. (2008a; 2010), in addition to the net-short radiation. If for a given 10 minute interval, the energy obtained by the melt calculation is negative, then no melt is generated. The input energy from the sun is considered to be used to increase the temperature of the snowpack. Positive energy is used for melting snow for the 10-minute interval. Using this energy budget algorithm, we optimize the intrinsic permeability of the snowpack for the two sets of experiments using one-dimensional water percolation model, which are $52.5{\times}10^{-10}m^2$ and $75{\times}10^{-10}m^2$ for the artificial rain-on-snow experiments and observations of diel variation, respectively.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.212-219
• /
• 2021

운송차량에 의한 화학사고는 매년 전체 화학사고의 20 %를 차지하지만 영향평가 정보를 알 수 없는 상황이 반복되어 사고대응 과정에서 어려움을 겪게 되는 문제점이 존재한다. 본 연구에서는 국내 사용량이 많고 사고 위험성이 높으며, 최근 7년간 사고 빈도가 높은 염소와 불화수소를 대상으로 탱크로리로 운반하는 과정에서 누출사고가 발생하였을 경우 현장에서 이격거리 산정을 위하여 활용될 수 있는 피해예측범위 산정표 및 산정식을 개발하였다. 화학물질의 누출속도와 기상조건 중 풍속, 온도에 따른 산정표를 조사하였으며, 산정표를 적용하기 힘든 특수한 상황에서는 산정식을 적용할 수 있도록 통계 프로그램 R을 사용하여 산정식을 도출하였다. 유관기관에서는 현장에서 연구에서 도출된 산정표 및 산정식을 활용하면 화학사고 피해 최소화 및 이격거리 설정, 주민대피 결정 등의 의사결정 측면에서 중요한 정보로써 사용할 수 있을 것으로 사료된다.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.771-779
• /
• 2008

An effective way of increasing the strength and fracture toughness of reactor pressure vessel steels is to change the material specification from that of Mn-Mo-Ni low alloy steel(SA508 Gr.3) to Ni-Mo-Cr low alloy steel(SA508 Gr.4N). In this study, we evaluate the effects of alloying elements on the microstructural characteristics of Ni-Mo-Cr low alloy steel. The changes in the stable phase of the SA508 Gr.4N low alloy steel with alloying elements were evaluated by means of a thermodynamic calculation conducted with the software ThermoCalc. The changes were then compared with the observed microstructural results. The calculation of Ni-Mo-Cr low alloy steels confirms that the ferrite formation temperature decreases as the Ni content increases because of the austenite stabilization effect. Consequently, in the microscopic observation, the lath martensitic structure becomes finer as the Ni content increases. However, Ni does not affect the carbide phases such as $M_{23}C_6 $ and $M_7C_3$. When the Cr content decreases, the carbide phases become unstable and carbide coarsening can be observed. With an increase in the Mo content, the $M_2C$ phase becomes stable instead of the $M_7C_3$ phase. This behavior is also observed in TEM. From the calculation results and the observation results of the microstructure, the thermodynamic calculation can be used to predict the precipitation behavior.