• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.135-141
• /
• 2014

$NH_3$-SCR has high NOx removal efficiency approximately 80~90%. Recently, the copper or iron ion-exchanged zeolite catalysts are widely used as automobile SCR catalysts. In this paper, the effect of the space velocity, temperature of reaction and $NO_2$ addition on the $NH_3$-SCR reaction were studied using various zeolite SCR catalysts. The test was conducted with small sized fresh catalysts in a laboratory fixed-bed flow reactor system using simulated gases. It is found that the activity of the BEA is better than MFI. It seems that three-dimensional framework and a wide pore entrance of BEA enhances the SCR activity. It is also found that low temperature activity of Cu-zeolites was better than Fe-zeolites. Once $NO_2$ was added, the NOx conversion activity of the Cu-zeolite was slightly enhanced, whereas remarkable improvement was achieved by Fe-zeolite.

• 공업화학
• /
• 제17권4호
• /
• pp.414-419
• /
• 2006

연소 배기가스 중의 수분, 탄화수소 및 CO가 저온 플라즈마 및 $NH_{3}$ SCR (Selective Catalytic Reduction)공정이 복합된 탈질공정에 미치는 영향에 대한 연구가 수행되었다. 실험결과 일반적인 SCR 반응에 비해 매우 빠른 반응속도를 갖는 fast SCR 반응은 $150{\sim}200^{\circ}C$의 저온조건에서 탈질율의 상승을 가져다주지만, 처리가스 중에 탄화수소가 있는 경우 fast SCR 반응의 역할이 상당히 감소되는 것을 확인할 수 있었다. 이는 저온 플라즈마 반응기에서 부분산화반응을 통해 탄화수소 중 일부가 알데히드로 전환되며, 알데히드는 fast SCR 반응에 있어 중요한 변수인 $NO_{2}/NO_{x}$ 비율에 영향을 주기 때문인 것으로 설명되었다. 한편, 수분 및 CO가 fast SCR 반응에 미치는 영향은 탄화수소에 비해 상대적으로 적음을 확인할 수 있었다.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.14-19
• /
• 2014

The purpose of the study is to investigate the effect of additive catalyst according to the thermal aging of vanadia SCR catalysts. At a fresh condition, the $3V_2O_5-5WO_5-92TiO_2$ SCR showed the highest NOx conversion rate of about 30%, the performance of 5 kinds of SCR to which additive catalysts were added was not improved due to the insignificant effect of acid site control. For catalysts aged for 12h at $700^{\circ}C$, the SCR to which 3wt% Zeolite was added decreased in NOx conversion rate by 2.5% on average compared to the fresh SCR, it showed higher thermal durability than other additive catalyst. For 3Zeolite with high performance of NOx conversion rate during thermal aging, the Zeolite with stronger durability at a high temperature than other 5 kinds of SCR catalysts decreased the sintering of catalysts.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• 공업화학
• /
• 제31권5호
• /
• pp.560-567
• /
• 2020

본 연구는 다양한 산업공정의 배가스 중 대표적인 활성저하 물질로 알려진 알칼리 금속[Na(Sodium)과 K(Potassium)]이 V/W/TiO₂ 촉매의 NH₃-SCR 반응에 미치는 영향을 확인 하였다. 이에 따른 활성 저하 원인을 규명하고자 NO, NH₃-TPD, DRIFT, H₂-TPR 분석을 수행 하였다. 그 결과, 각 알칼리 금속은 촉매 피독으로 작용하여 NH₃ 흡착양이 저하되고, Na과 K은 촉매의 반응 활성에 기여하는 L산점과 B산점을 감소시켜 SCR 반응을 저하시킨다. H₂-TPR 분석을 통하여 알칼리 금속은 V-O-V (bridge oxygen bond)와 V=O (terminal bond)의 환원 온도에 영향을 끼쳐, 환원 온도가 고온으로 올라가기 때문에 활성 저하 원인으로 판단된다.

• 청정기술
• /
• 제23권2호
• /
• pp.172-180
• /
• 2017

HCl에 의한 원소수은의 염화수은으로의 산화반응에 대한 열역학적 검토 결과 수십 ppm 수준의 HCl이 존재하는 경우에 SCR 반응 온도범위에서 원소수은의 염화수은으로의 전환은 100% 가능한 것으로 확인하였다. SCR공정 운전 온도범위에서 Cu, Fe, Mn의 염화물이 담지된 $V_2O_5-WO_3/TiO_2$ 촉매가 우수한 NO 제거 활성을 보였다. $NH_3-TPD$ 측정결과 $NH_3$의 흡착강도를 나타내는 탈착온도가 높은 촉매가 우수한 NO 제거활성을 나타내었다. 반응가스에 HCl을 공급할 경우 원소수은의 산화반응이 촉진되는 결과를 얻을 수 있었다. 그러나, NO와 함께 $NH_3$가 존재하는 SCR반응 조건에서는 촉매표면에 강하게 흡착되는 $NH_3$에 의해 촉매표면에 HCl의 흡착이 방해를 받기 때문에 HCl에 의한 원소수은의 염화수은으로의 산화반응 활성이 억제되는 것으로 나타났다. SCR반응 조건에서 금속염화물이 담지된 $V_2O_5-WO_3/TiO_2$ 촉매가 금속염화물이 담지되지 않은 $V_2O_5-WO_3/TiO_2$ 촉매에 비해 우수한 수은 산화활성을 보이는데 이는 촉매 표면에 존재하는 금속염화물의 염소기가 수은 산화반응에 참여하여 활성을 증가시키기 때문으로 판단된다.

• 플랜트 저널
• /
• 제18권3호
• /
• pp.52-61
• /
• 2022

본 연구는 실제 운영중인 영동에코발전본부 1호기 125 MW 우드펠릿 발전소를 대상으로 탈질설비 운전조건이 NOx 발생량에 미치는 영향을 시험하였다. SNCR 요소 유량 증가에 따라 NOx 농도는 점차 감소하였으나 SCR 후단 암모니아 슬립은 상승하였다. 시험대상 보일러는 고온의 내부온도로 인해 SNCR 운영에 불리한 구조이며 노즐의 최적위치 검토가 필요할 것이다. SCR 희석공기 온도변화는 NOx 발생량에 영향을 미치지 않았다. SCR 암모니아 유량 증가는 SCR 후단 NOx 농도를 감소시켰고 NOx 제거효율도 증가시켰다. 다만 암모니아 슬립 자체 기준치를 초과하지 않는 암모니아 유량 111 kg/h가 최대 운전기준으로 추정된다. SCR 믹서 압력 상승은 NOx 농도를 감소시키고 제거효율도 최대로 측정되어 NOx 생성을 가장 효과적으로 억제하는 변수로 파악되었다.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.244-253
• /
• 2018

Recently, The ministry of Environment in korea have introduced Euro-6d temp which was strengthened at the same time as Europe. Small Light-duty passenger vehicles need the SCR system of after-treatment to meet enhanced emission regulations. However, SCR system has a low conversion efficiency in a low temperature less than 200 degree. In this study, the NOx conversion efficiency of SCR system was analyzed by installing a NOx sensors and a temperature sensors in a diesel vehicle. Also, in order to analyze the effect of the cold-start, the test was performed on the same RDE route and compared with the test of hot-start. As a result, SCR system has characteristics of low conversion efficiency under cold-start conditions.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.42-47
• /
• 2011

The purpose of this study is to investigate the best melting condition with various winding number of a heating pipe, supplying quantity of engine coolant and coolant temperature at the inlet of the heating pipe. Also, it is to suggest getting method of an appropriate quantity of the agent for the urea-SCR system within 10 minutes. For this matter, this study identifies the temperature distribution of inside of urea-tank while it is frozen at the low temperature condition, and suggests the best melting condition of the frozen urea within 10 minutes. From the results, it was found that 2L of melted urea was obtained by the coolant flow rate of 200L/hr at $70^{\circ}C$ for 10 minutes from the start of engine operating.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.457-457
• /
• 2013

Current-voltage (I-V) measurements of crystalline silicon solar cells was conducted under dark conditions with the temperature range of 260 K~350 K. Using the calculation method, we extracted the crucial factors of ideality factor (n) and activation energy (Ea) to investigate the carrier conducting path in the space charge region (SCR) and the quasi-neutral region (QNR). Values of n were decreased with increasing temperature in both SCR and QNR. We also conformed that the value of Ea of SCR was larger than that of QNR about 0.4 eV. The temperature dependence of n indicates that the carrier conducting path is dominated by carrier recombination-generation in the SCR region than in the QNR region.