• ETRI Journal
• /
• 제28권5호
• /
• pp.555-560
• /
• 2006

A PIN photodiode having a low dark current of 1.35 nA and a high external quantum efficiency of 95.3% fabricated for a passive optical network receiver. As the current was increased under a high voltage of 38 V and a temperature of $190^{\circ}C$, it was observed that there is a threshold current at 11 mA which induces a junction failure. Experimental data suggest that the junction failure occurs due to the crystal breaking at the end facet as a result of thermal heat or energetic carriers. This threshold behavior of junction failure is a valuable observation for the safe treatment of photodiodes. As long as the current is limited below the threshold currents, we have not observed failure events of our photodiodes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.152-157
• /
• 2009

Titanium alloy sheets have excellent specific strength and corrosion resistance as well as good performance at high temperature. Recently, titanium alloys are widely employed not only aerospace parts but also bio prothesis and motorcycle. But the database is insufficient of the titanium alloy for press forming process. In this study, the effect of temperature on the forming limit diagram was investigated for Ti-6Al-4V titanium alloy sheet through the Hocker's punch stretching test at elevated temperature. Experimental results obtained in this study can provide a database for development of press forming process at elevated temperature of Ti-6Al-4V titanium alloy sheet. From the experimental studies it can be concluded that the formability of Ti-6Al-4V titanium alloy sheet is governed by the ductile failure for the testing temperature below and vice versa neck-induced failure above the recrystalization temperature $0.5T_m$. The formability of Ti-6Al-4V titanium alloy sheet at $750^{\circ}C$ increases about 7 times compared with that at room temperature.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.54-62
• /
• 2017

본 논문에서는 해상 구조물들의 화재시 안전성 평가에 대한 연구의 일환으로써 기본적인 구조강도 부재들의 화재시 거동 및 파괴확률을 구해 보았다. 화재에서의 안전성 평가는 부재의 Fire resistance와 화염에 의한 열하중인 Fire severity를 비교하여 이루어질 수 있다고 가정하였다. Fire severity는 육상 건축물에 대한 화재안전 규정인 Eurocode 1의 표준화염 온도변화 곡선과 부재로의 열전달 방정식을 사용하여 부재의 최대온도를 구하게 되며, Fire resistance는 단순 부재의 경우, 간략식과 코드의 활용으로 해결할 수 있지만, FPSO 와 해상 구조물의 복잡성을 고려하여 상용 구조해석 프로그램의 활용을 통하여 탄소성해석 및 대변형등을 고려한 보다 실용적인 부재의 구조강도를 해석하여 주어진 파괴모드에 대한 한계 온도를 구하여 최대온도와 비교하였다. 더불어, Fire resistance 측면에서의 두 접근방식의 비교를 통해서 두 방식의 등가적 성향을 확인하였다. 여기서 Strength, Serviceability, Stability의 세 가지 측면에서 First Hinge, Large Deflection, Buckling의 세 가지 파괴모드를 상정하고 각각에 대한 파괴여부를 확인하였고, 이렇게 구해지는 Fire severity와 Fire resistance의 식에 AFOSM 방법을 적용하여 최종적으로 부재의 파괴확률을 구하는 방식을 통해, 단순 부재인 Beam 및 Plate 예제에 적용하여 구조물의 화재시 거동 및 각 파괴모드에 대한 파괴여부를 구하였다.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.19-26
• /
• 2013

Stress triaxiality is recognized as one of the most important factors for predicting the failure strain of ductile metals. This study dealt with the effect of the average stress triaxiality on the failure strain of a typical low-temperature high-strength marine structural steel, EH36. Tensile tests were carried out on flat specimens with different notches, from relatively smooth to very sharp levels. Numerical simulations of each specimen were performed by using ABAQUS. The failure initiation points in numerical simulations were identified from a comparison of the engineering stress vs. strain curves obtained from experiments with simulated ones. The failure strain curves for various dimensionless critical energy levels were established in the average stress triaxiality domain and compared with the identified failure strain points. It was observed that most of the failure initiation points were approximated with a 100% dimensionless critical energy curve. It was concluded that the failure strains were well expressed as a function of the average stress triaxiality.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2989-2998
• /
• 2022

Line contact structures, such as the contact between graphite brick and graphite tenon, widely exist in high-temperature gas-cooled reactors. Due to the stress concentration effect, the line contact area is one of the dangerous positions prone to failure in the nuclear reactor core. In this paper, the failure mechanism of line contact structures composed of IG11 nuclear graphite column and brick were investigated by means of experiment and finite element simulation. It was found that the failure process mainly includes three stages: firstly, the damage accumulation in nuclear graphite material led to the characteristic yielding of the line contact structure, but no macroscopic failure can be observed at this stage; secondly, the stresses near the contact area met Mohr failure criterion, and a crack initiated and propagated laterally in the contact zone, that is, local macroscopic failure occurred at this stage; finally, a second crack initiated in the contact area and developed in to a Y-shape, resulting in the final failure of the structure. This study lays a foundation for the structural design and safety assessment of high-temperature gas-cooled reactors.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.799-804
• /
• 2011

본 논문에서는 칩저항을 실장하는 솔더에 대한 온도사이클 시험을 수행하고, 그 결과로부터 고장 예지 실현을 위한 열하중에서의 솔더실장의 고장메커니즘을 연구하였다. 시험 중 솔더의 고장을 모니터링하기 위하여 실장된 칩저항 양단간의 저항 변화를 데이터 측정기로 실시간 관찰하였다. 관찰 데이터로부터 솔더의 크랙 진전 중과 크랙 진전 완료 시점의 고장 메커니즘을 제시하였다. 제시된 고장 메커니즘을 유한요소법으로 검증하여 솔더의 크랙이 진전 중에는 저온조건에서 크랙이 열리고 저항이 증가하며, 크랙의 진전이 완료된 후에는 고온조건에서 크랙이 열리고 저항이 증가하는 조건으로 바뀜을 보였다. 이런 결과에 기반하여 온도 사이클에서 저항측정을 통해 칩저항 실장 솔더의 고장예지가 가능함을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.33-39
• /
• 2015

최근 급속한 기후변화 및 광범위한 사회간접시설의 개발 등으로 인해 사면붕괴가 곳곳에서 발생하고 있으며, 이에 대한 모니터링 및 예방시스템 구축에 대한 사회적인 관심이 증가하고 있는 상태이다. 사면붕괴 메카니즘에 영향을 미치는 중요한 영향인자는 지표내 수분 및 온도이며 이에 대한 변화 추이를 통해 사면붕괴를 예측할 수 있다. 따라서, 사면붕괴 모니터링을 위해서는 지표 깊이별 온도 및 함수비를 연속적으로 측정할 수 있는 복합센싱 기법이 필요하다고 볼 수 있다. 현재까지 온도 및 함수비에 대해 각각의 계측이 가능한 개별 센서는 다양하게 개발되어 있는 상태이지만, 온도 및 함수비를 동시에 연속적으로 측정할 수 있는 복합계측 시스템의 경우에는 많은 연구가 필요한 상태이다. 본 논문에서는 전류소모가 최소화된 측온 회로와 고주파 신호를 토양에 방사하는 수분 측정 센서를 적용한 고정밀 온도-함수비 복합센서를 개발하여 효율적이고 정확도를 향상시킨 사면붕괴 모니터링 시스템에 적용할 수 있도록 하였다. 개발된 복한센서의 성능검증을 위하여 기본성능 표준시험, 실내검증실험, 현장장기실험 등의 다양항 실험적 연구를 수행하였으며, 실험결과를 통해 개발된 복합센서를 이용한 모니터링 시스템은 지반의 온도 및 함수비를 정확하게 모니터링할 수 있는 것으로 나타났다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.140-144
• /
• 2003

To investigate failure analysis of surface acoustic wave (SAW) filter for radio frequency, high temperature storage test was carried out. The failure criteria were insertion loss at passband and rejection level at stopband. As a result, the insertion loss at passband increase about 4 dB was due to damages of interdigital transducer (IDT). That is caused by poor adhesion between metal electrode(AI) and piezoelectric substrate and defects on a manufacturing process. This result indicates that good adhesion between electrode and ceramic substrate is important factor And also we investigated the demage factors of electrode. Screen possible of saw filter using high temperature storage test(HTOL) in the manufacturing phase be presented.

• 수산해양기술연구
• /
• 제28권3호
• /
• pp.295-305
• /
• 1992

The critical strain energy release rate and the failure mechanisms of glass-carbon epoxy resin hybrid composites are investigated in the temperature range of the ambient temperature to 8$0^{\circ}C$. The direction of laminates and the volume fraction are [(+45, -45, 0, 0) sub(2) ] sub(s), 50%, respectively. The major failure mechanisms of these composites are studied using the scanning electron microscope for the fracture surface. Results are summarized as follows: 1) The critical strain energy release rate shows a maximum at ambient temperature and it tends to decrease as temperature goes up. 2) The critical strain energy release rate increases as the content of glass increases, and especially shows dramatic increase for the high glass fiber content specimens. 3) Major failure mechanisms can be classfied such as localized shear yielding, fiber-matrix debonding, matrix micro-cracking, and fiber pull-out and/or delamination.