• 설비공학논문집
• /
• 제29권10호
• /
• pp.515-529
• /
• 2017

EnergyPlus, which is widely used in various fields, provides Simple Window Model, a window model that can be used practically. However, the results of building load using the model are different from those of the standard model. The main cause of the deviation by Simple Window Model was analyzed to be due to the assumption that all windows were considered as single layer. The purpose of this study is to propose a window model that improves the cause of deviation by Simple Window Model and can be easily calculated from the algebraic relations. The proposed window model solved the heat balance equation algebraically by using seven window characteristic coefficients. The coefficient relationships consisted of the heat transmission coefficient and solar heat gain coefficient as input parameters make practical use and calculation possible. As a result of comparing the deviation between each window model by implementing the dynamic analysis method, the proposed window model showed that the deviation of the total heating/cooling energy consumption was reduced to 1/3 compared to Simple Window Model for one year. Although the maximum energy consumption did not show any significant improvement, the indoor temperature evaluation showed significantly reduced deviation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.7-15
• /
• 2015

We have investigated electrical properties of graphene/Ge Schottky barrier diode (SBD) fabricated on Ge film epitaxially grown on Si substrate. When decreasing temperature, barrier height decreased and ideality factor increased, implying their strong temperature dependency. From the conventional Richardson plot, Richardson constant was much less than the theoretical value for n-type Ge. Assuming Gaussian distribution of Schottky barrier height with mean Schottky barrier height and standard deviation, Richardson constant extracted from the modified Richardson plot was comparable to the theoretical value for n-type Ge. Thus, the abnormal temperature dependent Schottky behavior of graphene/Ge SBD could be associated with a considerable deviation from the ideal thermionic emission caused by Schottky barrier inhomogeneities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1188-1195
• /
• 2007

The vertical forces in rail fasteners at areas of bridge transitions near the embankment and on the pier will occur due to different deformations of adjoining bridges caused by the trainloads, the settlement of supports, and the temperature gradients. The up-lifting forces is not large problem in the blast track because the elasticity of blast and rail pad buffs up-lifting effect. But, it is likely to be difficult to ensure the serviceability of the railway and the safety of the fastener in the end in that concrete slab track consist of rail, fastener, and track in a single body, delivering directly the up-lifting force to the fastener if the deck is bended because of various load cases, such as the end rotation of the overhang due to the vertical load, the bending of pier due to acceleration/braking force and temperature deviation, the settlement of embankment and pier, the temperature deviation of up-down deck and front-back pier, and the rail deformation due to wheel loads. The analysis of the rail fastener is made to verify the superposed tension forces in the rail fastener due to various load cases, temperature gradients and settlement of supports. The potential critical fasteners with the highest uplift forces are the fastener adjacent to the civil joint. The main influence factors are the geometry of the bridge such as, the beneath length of overhang, relative position of bridge bearing and fastener, deflection of bridge and the vertical spring stiffness of the fastener.

• 대기
• /
• 제26권1호
• /
• pp.193-201
• /
• 2016

An anomalous cold-weather period occurred during January 2011 in East Asia, and this study investigates the event by focusing on the blocking phenomena formed at Northeastern Asia. The area of cold weather is determined to represent the characteristic features of abnormal cold temperature. The 2010/11 winter is divided into three periods P1, P2 (cold period), and P3. For the cold area ($30-50^{\circ}N$, $115-135^{\circ}E$) the corresponding cold period P2 is determined to be 39 days from 23 December 2010 through 30 January 2011. During P1 and P3 temperature anomalies from the climatological mean are small with large standard deviation compared to those of P2, which has large negative anomaly and small standard deviation. The period P2 is dominated by blocking, which was determined by distributions of 500-hPa geopotential height and potential temperature on the 2 PVU surface. Correlation-coefficient analyses show that during P2 the temperature in the cold area is related with pressure of Northeastern Asia, while the temperature during P1 and P3 is related with pressure of Northwest of Korea. Also, during P1 and P3 the temperature pattern shows eastward propagation, but during P2, a stationary pattern. All the observations imply that, during the cold period P2, the temperature in the cold area is related with blocking in Northeastern Asia. During P1 and P3 temperature pattern is related with 500-hPa geopotential height in Siberia, and this relationship is also observed in the climatological mean state.

• 한국농림기상학회지
• /
• 제10권1호
• /
• pp.25-31
• /
• 2008

초지피복 조건에서 사면의 일사수광량 차이가 일 최고기온에 미치는 영향을 파악하기 위해 2007년 하지부터 동지까지 밑면지름 570m, 높이 90m인 원추형 기생화산 "높은오름"의 측면 경사 8 지점에서 일 최고기온을 측정하였다. 8개 지점 평균값을 기준온도로하여 각 지점의 기온편차를 구해 비교한 결과 기온편차는 하지로부터 동지로 갈수록 커지는 경향이었고, 관측기간 평균은 남향사면에서 $1.0^{\circ}C$, 북향사면에서 $-0.8^{\circ}C$로서 그 차이가 평균 $1.8^{\circ}C$에 달했다. 기온편차의 월별 평균은 11월에 가장 크며 남향사면에서 $2.1^{\circ}C$, 북향사면에서 $-1.3^{\circ}C$였다. 일별 기온편차의 최대값은 남향사면에서 $3.8^{\circ}C$, 북향사면에서 $-2.7^{\circ}C$에 달했는데, 이러한 기온편차 변이는 일사수광량 편차에 근거한 지형특성지수와 높은 상관을 보여 복잡지형의 일 최고기온 추정모형 개발에 활용될 수 있을 것으로 기대된다.

• 한국농림기상학회지
• /
• 제14권4호
• /
• pp.155-160
• /
• 2012

이 연구는 1월 일 최저기온의 평균을 이용하여 재현기간별 일 최저기온의 극값을 예측하는 방법을 개발하기 위해서 수행되었다. 전국 61개 기상관서의 1961~2010년의 50년 간의 일 최저기온자료를 이용하여 전체 연구를 수행하였다. 1월의 일 최저기온의 분포는 대부분 정규분포를 나타내고 있어, 이는 평균과 표준편차로부터 일 최저기온을 확률적인 기댓값으로 예측될 수 있었다. 이를 위하여 일 최저기온평균으로부터 일 최저기온의 표준편차의 변이를 추정하는 2차식을 개발하였다. 과거 10, 20, 30, 40, 50년의 재현 기간별로 관측된 일 최저기온의 평균, 표준편차, 극값을 분석하여 재현기간별 극값을 예측할 수 있는 계수를 도입하였고, 이 계수를 재현기간별로 추정할 수 있는 로그함수식도 개발하였다. 이 방법을 이용하여 과거 두 기간의 30년 자료를 이용하여 61개 지점에 대해 검증하였는데 평균 $1.1^{\circ}C$, 최대 $5.3^{\circ}C$의 오차를 가지고 과거 30년 재현기간의 일 최저기온의 극값을 예측할 수 있었다.

• 한국농림기상학회지
• /
• 제20권4호
• /
• pp.376-385
• /
• 2018

일출 이후부터 일몰 전까지 낮 동안 태양 일사로 인한 복잡지형 내 산사면 매시 기온 분포를 추정하기 위해, 동향사면과 서향사면 간 대표 기상관측지점에 대하여 매시 일사량 편차에 따른 관측기온의 편차(기온변화량)로 경험식을 산출하였다. 해당 경험식으로 일사효과를 모의하여 2015년 1월부터 2017년 12월까지 농산촌 지역 기상관측지점 11곳에 대해 매시 기온을 추정한 후 검증하였다. 매시 기온감률로 해발고도 보정만을 수행한 결과와 대조하였을 때, 일차식 형태의 경험식을 이용할 경우, 오전 9시부터 오후 3시까지 기온의 과소추정경향이 감소되어 추정오차를 줄일 수 있었다. 다만, 오후 5~6시에는 관측값 대신 기하학적 조건으로 계산된 경사면 일사량 편차로 도출된 hyperbolic equation이 더 추정오차가 작았다. 오후 3시 기준의 한낮기온은 선행연구에서 제시한 기존 모형과 추정신뢰도를 대조하였는데, 기존 모형의 추정오차(ME $-1.20^{\circ}C$, RMSE $2.01^{\circ}C$)를 ME $-0.28^{\circ}C$, RMSE $1.29^{\circ}C$까지 개선시킬 수 있었다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권3호
• /
• pp.118-123
• /
• 2006

A few commonly used correlation equations of the enthalpy of vaporization essential to the analysis of refrigeration cycles are reviewed. A new four-parameter correlation equation is proposed assuming that the enthalpy of vaporization could be represented with a linear form of the temperature and an additional function which slowly decreases as the temperature increases. It is not a common practice to measure the enthalpy of vaporization by experiment; therefore, performance of the new correlation is examined using numeric data from the ASHRAE tables for 22 pure substance refrigerants. The new correlation equation and other existing ones are fitted to the data optimizing the root mean squared deviation. All data points are weighted equally and NBP (normal boiling point) is used as a fixed point since the NBP is important for refrigeration application. The new four-parameter equation yields an average absolute deviation of 0.05% for 22 refrigerants which is smaller than those of other four-parameter equations, such as Guermouche-Vergnaud (0.08%), Aerebrot (0.13%), Radoz-Lyderson (0.08%), and Somayajulu four-parameter equation (0.08%).

• Macromolecular Research
• /
• 제10권1호
• /
• pp.13-17
• /
• 2002

An artificial neural network (ANN) was used to study the relationship between the glass transition temperature (T$_{g}$) and the structure of homopolymers. The input is very important for the ANN. In this paper, six kinds of input vectors were designed for the ANN. Of the six approaches, the best one gave the is T$_{g}$ of 251 polymers with a standard deviation of 8 K and a maximum error of 29 K. The trained ANN also predicted the T$_{g}$ of 20 polymers which are not included in the 251 polymers with a standard deviation of 7 K and a maximum error of 21 K. 21 K.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.730-738
• /
• 1994

The major advantage of the short-term load forecasting technique using general exponential smoothing is high accuracy and operational simplicity, but it makes large forecasting error when the load changes repidly. The paper has presented new technique to improve those shortcomings, and according to forecasted the technique proved to be valid for two years. The structure of load model is time function which consists of daily-and temperature-deviation component. The average of standard percentage erro in daily forecasting for two years was 2.02%, and this forecasting technique has improved standard erro by 0.46%. As relative coefficient for daily and seasonal forecasting is 0.95 or more, this technique proved to be valid.