• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1204-1208
• /
• 1991

This paper describes the 2-channel telemeter system using AM(Amplitude Modulation) - FM (Frequency Modulation) techniques suitable for measurement of spindle torque by strain gage. In order to evaluate the developed system, the model tests were performed for test specimens. The developed system was installed on the plate mill and it was possible to measure and analyze the torque signal of spindle,

• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.131-140
• /
• 2000

Spraying operation is one of the most essential in an orchard management and it is also hazardous to human body. for automatic and unmanned spraying , an autonomous travelling vehicle is demanded. In this study, a telemeter was developed using infrared beam which could detect trunks and obstacles measure distance and direction from the vehicle travelling in the orchard. The telemeter system was composed of two infrared LED transmitters and receivers, a beam scanning device for continuous object detection , two rotary encoders for angle detector, and a beam level controller for uneven soil surface. The detected distance and direction signal s were sent to personal computer which made for the system display the angular and distance measurements through I/O board. According to a field test in an apple farm, the system detected up to 10m distance under 12 V of transmitted beam intensity, however, it was recommended that the proper beam transmit intensity be 7 v at the 10 m distance, because of the negative effect to human body at 12 V. The error rate of this system was 0.92 % when the actual distance was compared to measured one. The system was feasible at the small error rate. The developed telemeter system was an important part for autonomous travelling vehicle provided the real time object recognition . A direction control system could be constructed suing the system. It is expected that the system could greatly contribute to the development of autonomous farm vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.63-70
• /
• 1994

This paper presents manufacturing and evaluation of a non-contact rotational torque measurement system which consists of torque cell, telemeter system, transmitter and receiver coil, transmitter, receiver and telemeter indicator. Static calibration test results show that the system has a maximum uncertaintry of 05% or less. A standar calibration system for rotational torque is used to evaluate the measurement system, As a result, the maximum uncertainty for measuring rotational torque by this system is 2% or less. We may conclude that the measurement system is sufficient to measure rotational torque of shaft in industry.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.342-346
• /
• 2003

Present CDMA technology is development continuously to internet technology and new communication infra called internet construction for quality of high quality offer the changing existent existence. wireless data communication area. In the meantime, our country is tunnel of whole country over 500 by special quality that is photograph because Safety diagnosis consists to manage preservation administration is in dangerous state about safety. Domestic telemeter technology is real condition that is depending on expensive foreign goods and engineer to improve that. Therefore tunnel preservationㆍadministration more improved telemeter system develop wish to this research uses CDMA net.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.40-47
• /
• 1998

This paper presents the physiological signal processing CMOS one chip for transmitting human bodys small electrical signals such as electrocardiogram(EKG) or electromyogram(EMG) and the external system for receiving signals was implemented by the commercial ICs. For simultaneous four-subject four-channel telemetry, a new enfored synchronization techniqeu using infrared bi-directional communication has been proposed. The telemeter IC with the size of 5.1*5.1mm$^{2}$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject-selection signal, time multiplexing of 4-channel modulated physiological signals, transmitting of telemetry signal to external system and auto power down control. The newly designed synchronized oscillator with low supply voltage dependence in the telemeter IC operates at a supply voltage from 4.6~6.0V and the nonlinearity error of PIM modulator was less than 1.2%F.S(full scale). The power saving block operates at the period of 2.5ms even if the telemetry IC does not receive command signal from external system for a constant time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1997.12a
• /
• pp.11-17
• /
• 1997

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.1
• /
• pp.11-17
• /
• 1987

This paper describes an availability of the teltmeter device made as a trial to measure the under-water noise, and the results of the test. This telemeter device adopts FM-FM system, and its main carrier wave is 146.2MHz. The trans-mission power is about 1w, and the available distance of transmission is 2.5KM. The timer built in the telemeter device controls transmission time and pause time automatically by the R-C time-constant. The former is 30-32 seconds and the latter is 10-12 seconds. The underwater noise in the set net fishing ground and at the breeding tank was measured, and recorded simultaneously on land and at sea with the telemeter device. When the input voltages of the transmitter is 100-300mV, the value of telemetering ambient noise and bio-acoustic underwater noise well agreed with that of the direct measurement. And the teleme-tered underwater noise decreases in proportion the distance between the transmitter and receiver.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1992.07a
• /
• pp.318-324
• /
• 1992

본 연구에서는 한강홍수예경보를 위한 기존 Telemeter 수문관측망의 현황을 조사하고 홍수예경보 프로그램을 검토하여 개선방안을 제시하였으며, 호우사상을 분석하여 한강유역에 대한 호우의 원인별 시간분포를 권역별로 나타냈고 강우공간분포에 대한 분석을 실시하였다. 또한, 유출예측 프로그램의 유역유출모형과 하도유출모형의 변수를 결정하고, 예경보지점별 유출예측 프로그램을 검토하여 개선하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1009-1011
• /
• 2002

Some defective cells in the battery bank of power systems using batteries result in deterioration of the performance of the total battery bank. Consequently, the battery bank can't perfectly back up the system in occurrence of any power problems and the overcharge of defective cells may lead to their explosion or the occurrence of fire. The developed battery management system in this study enables operators to telemeter and analyze internal resistance, voltages, currents, and temperatures of batteries at remote sites through a PC, so they can detect defective cells before the occurrence of power problems. And adoption of this system ensures extension of battery life.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.158-162
• /
• 1989

This experiment was conducted to evaluate individual difference of chewing speed and chews per bolus duing the rumination using twenty three heads of grazing cattle and thirty six heads of barn feeding cattle. Rumination behaviour was measured and recorded by the masster EMC telemeter and visual observation. The chewing speed (chews/lOOsec) was significantly different individually (C.V. 13.0-14.5 %) among the variable aged group (1-60 months), but that of same aged group showed lower difference (C.V. 4.5 %). The chews per bolus showed even larger individually difference than the chewing speed, so the variable aged group (1-60 months) resulted the 15.5-16.2 %of C.V.and the same aged group showed the 9.5 % of C.V. Under 12 month aged cattle showed more rapid chewing speed than older aged cattle. The chewing speed changed with the growth of cattle, but the chews per bolus did not show any relationship with age, so it is regarded as the individually characteristic pattern.