• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제50차 하계학술대회논문집 22권2호
• /
• pp.245-248
• /
• 2014

산업플랜트에는 고온 고압 배관 시스템을 갖춘 곳이 많으며, 이 배관 시스템의 건전성은 매우 중요하게 취급된다. 배관의 건전성 유지를 위해서는 일정 기간 동안 배관의 안정성 검사를 수행하게 되는데, 배관 시스템의 복잡성과 위험성으로 인한 검사자의 접근 자체가 매우 어려운 상황이 빈번하게 발생한다. 이를 해결하기 위하여 로봇 개술을 적용하는 연구개발이 지속되고 있는데 본 논문에서는 5축 대관절 매니퓰레이터 형태의 배관 등반이 가능한 반자동 원격 제어 로봇의 개발에 대하여 기술한다. 이 로봇의 구현을 위해서는 로봇의 배관 인지 기술, 로봇의 배관 그리핑 기술, 5축 관절의 제어 기술, 그리고 원격제어기술등이 요구된다.

• 한국지능시스템학회논문지
• /
• 제13권6호
• /
• pp.692-697
• /
• 2003

지난 몇 년 동안 인터넷기반 원격제어 연구에 대한 관심이 높아지고 있다. 본 논문에서는 인터넷기반 원격 제어시스템을 구현한다. 로봇의 주변환경 및 제어 정보를 강인하게 전송하기 위하여 데이터를 패킷 형태로 만든다. 또한 매우 큰 용량을 갖는 영상 데이터를 전송하기 위하여 JPEG 압축 알고리즘을 이용한다. 인터넷 기반 원격제어의 주된 문제점은 데이터 전송 지연 또는 데이터 손실이다. 이러한 특수한 문제를 해결하기 위하여 2-layer fuzzy controller를 장착한 자율이동로봇을 소개한다. 그리고, 컬러 인식 시스템을 구현하여 로봇을 물체를 인지할 수 있도록 하였다. 다양한 입력 센서가 장착된 로봇에 2-layer fuzzy controller를 적용하여 그 효율성을 입증한다. 2-layer fuzzy controller는 다양한 입력과 출력을 갖는 로봇을 강인하게 제어할 수 있고 제어 비용도 낮기 때문에 그것이 다양한 분야에 적용되어 질 것으로 기대된다.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.127-140
• /
• 1999

In order to apply three-dimensional images to industries, the possibility of realizing three-dimensional images should be ensured and when operating a task using three-dimensional images, the intention of the observer and the result of operation should be precisely related. The aim of this paper is to investigate the task performance of a human operator during operating a robot manipulator using three-dimensional and two-dimensional image displays. From the result of this research, it was found that the accuracy of robot operation in the case of using three-dimensional displays is much higher than in the case of using two-dimensional displays and the adapting time to the operating task using three-dimensional displays is shorter than that using two-dimensional displays. From such results, we concluded that the application of three-dimensional displays, which can closely reflect real environment, to industries is desirable.

• 방송공학회논문지
• /
• 제20권6호
• /
• pp.963-966
• /
• 2015

본 논문에서는 최신 압축 표준인 HEVC(High Efficiency Video Coding)를 포함한 다양한 비디오 압축 표준을 처리할 수 있는 프로그래머블 멀티 포맷 복호기(Multi-Format video Decoder: MFD)를 제안한다. 제안한 MFD는 DTV(Digital Tele-Vision) SoC(System on Chip)에 필요한 고사양의 FHD(Full High Definition) 비디오 복호기를 목표로 하였다. 다양한 동영상 압축 표준과 방대한 연산 능력을 지원하기 위하여 제안된 플랫폼에서는 재구성형 프로세서(reconfigurable processor)와 하드웨어 가속기의 하이브리드 구조를 사용하였다. 실험결과 HEVC로 압축된 초당 30장의 FHD 영상을 300MHz에서 디코딩 가능함을 확인하였다.

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.19-28
• /
• 2016

This study was to design the optimal locations of the water level monitoring to quantify the agricultural water use in irrigation area supplied from an agricultural reservoir. In most of agricultural areas without TM/TC (Tele-Monitoring and Tele-Control) or monitoring network, irrigation water have been supplied on conventional experience and agricultural reservoir have been operated based on the operating simulation results by HOMWRS (Hydrological Operation Model for Water Resources System). Therefore, this study quantified the amount of agricultural water use in an irrigation area (Musu Reservoir, Jincheon-gun) by establishing water level monitoring network and analyzed the agricultural water saving effect. According to the evaluation of the economic values for water saving effect, the saving agricultural water of 1.7 million ton was analyzed to have economic values of 0.85 million won as water for living, and 1.78 million won as water for industrial use. It is identified to secure economic feasibility of the new water monitoring network by establishing one monitoring point in the entrance, irrigation area and endpoint through the economic analysis.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.840-845
• /
• 2010

This paper proposes the method indirectly measuring the operating force of the end-effect tip of surgical robot instrument which conducts the surgical operation in the body on behalf of the surgeon's hand. Due to the size and safety obligation to the surgical robot instrument, it is difficult to measure the operation force of its tip like grasping force. However the instrument is driven by cable-pulley torque transmission mechanism and when some force is occurred at the tip, then the reaction force appears on the cable as additional tension. Based on this phenomenon, this paper proposes a method to estimate the operating force from measuring reaction force against the driving motor by using a loadcell. And it induces mathematical equation to calculate the force from loadcell by approaching the modulus of elasticity to high order polynomial. And this paper proves the validity of proposed mechanism by experimental test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.916-918
• /
• 1996

We have an urgent matter that is lack of energy resource. So we have to accomplish the design of economical energy utility systems and to develop energy facilities with high efficiency. Cogeneration system is one of them. It has high efficiency and can solve unbalanced electricity and heat demand in Summer & Winter concurrently. Recently, to increase the efficiency and stability of the total system, it is applying automatic control and monitoring software to the hardware facilities in industrial control systems. Therefore, these systems has been researched and developed in the advanced countries. It also has been researched and developed in the domestic since '60. But the control and monitoring software in cogeneration system has been hardly developed and has been imported expensive products from the advanced countries. In this study, we have developed the software of operating control, status monitoring, operating data managing and tele-controlling. We have confirmed usefullness of developed software by applying to gas turbine cogeneration system.

• 한국물환경학회지
• /
• 제34권5호
• /
• pp.462-469
• /
• 2018

There are differences in method and cycle of flow rate survey depending on purpose of the operating department. To verify and use results of flow data according to the purpose, flow data of the directly measured and tele monitoring system were compared to verify validity. Flow measurement in the Ministry of Environment is aimed at setting up a standard flow of target water quality for water quality management and securing flow data of low and normal water level seasons for water quality evaluation. In this study, correlation analysis result ($R^2$) of same time zone data by direct measurement and tele monitoring system (TMS) at Seombon D point, a unit watershed of Seomjin river, for six years ('10 ~ '15) according to implementation of Total Daily Maximum Load (TDML) was wading 0.716, boating 0.962 and on bridge 0.943, and effectiveness of measurement method was verified by characteristics of flow duration as a season of dry and low-water; normal and high water are appropriate for wading, boating, and on bridge respectively. Results revealed it is reasonable to use directly measured results using the wading and boating method for low water level and dry seasons, and TMS data for rainy seasons. It can be used important data for future policy decisions.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(A)
• /
• pp.274-275
• /
• 2012

생체모방로봇은 인간을 비롯하여 새, 곤충, 물고기 등 동물들의 기본구조, 행동원리 및 메커니즘을 모방한 로봇이다. 정찰, 수색, 테러진압 등 군사작전에서부터 인명구조까지 생체모방로봇은 인간의 눈과 발을 대신하여 인간이 접근할 수 없는 오염 지역을 면밀히 탐지하는 데에도 유용하리라 예상된다. 이와 같은 생체모방로봇이나 MAV 등을 실시간으로 원격에서 모니터링하고 제어할 수 있는 DAQ 시스템의 중요성이 커지고 있다. 본 논문에서는 생체모방로봇인 가오리를 원격 관제 센터에서 RF무선통신을 이용하여 안정적인 제어 및 모니터링이 가능한 DAQ(Data AcQuisition) 시스템을 제안한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1190-1194
• /
• 2007

Since the dismantling processes of building are very dangerous, there have been many studies to develop a remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling actuator that is usually an excavator, a novel concept of tele-operated haptic device is proposed. Operators who use this haptic device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the haptic device, the workspace mapping from the haptic device to the excavator is explored. Second, the kinematics which deals with the conversion from the 3 dimensional position information of the haptic device to the joint variable information of the backhoe is included. Lastly, 3D graphical simulation of both haptic device and the backhoe will be shown. This new design of the haptic device can be easily manufactured and gives the workers very convenient and transparent remote control capability.