• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.351-356
• /
• 2017

This study introduces the current status of the design for safety(DfS) introduced as one of the owner - centered construction site safety management plan, and presents the problems and the improvement plan. The design for safety has been shifting from the construction management-oriented safety management to the owner-centered safety management system, The owner has to make the design considering the safety from the design stage centered on the owner. The owner has to review and approve the adequacy of the safety-conscious design and The risk factors that can not be eliminated during design are the system to prevent the disaster at the construction site by planning to eliminate the risk factor when writing the safety management plan that is made at the construction stage. The design for safety system implemented from May 2016 will be further developed to prevent the risk of safety accidents that may occur in construction sites, contributing greatly to the reduction of construction accident. In addition, it suggests ways to develop more efficient and convenient system through continuous hazard finding and system improvement.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.424-429
• /
• 2000

A novel differential pressure sensor has been developed with silicon beams embedded in a silicone rubber membrane. The transducer is usable for most applications involving exposure to harsh media. A piezoresistive differential pressure sensor using silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micro-machining technique using porous silicon etching. The pressure sensitivity is about $0.66\;{\mu}V/mmHg$ and the non-linearity is less than 0.1%.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.61-66
• /
• 1998

High quality c-axis oriented $YBa_{2}Cu_{3}O_{7}$ films were prepared using the pulsed laser deposition on $SrTiO_{3}$(100) substrate. The atomically smooth $SrTiO_{3}$surface with terraces one unit cell in height could be obtained by a high temperature annealing. $YBa_{2}Cu_{3}O_{7}$ thin films deposited on the substrates exhibited layer-by-layer growth with a c-axis unit cell height. $YBa_{2}Cu_{3}O_{7}$ thin films thus prepared showed critical temperature ${\ge}90$ K with transition width ${\le}0.6$ K, room temperature resistivity of ${\sim}300{\mu}{\Omega}cm$, and critical current density ${\sim}4.6{\times}10^{6}A/cm^{2}$ at 77 K.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.117-123
• /
• 1992

$Pt-SnO_{2-x}$ thin film sensing devices has been fabricated by thermal oxidation of stacked Pt-Sn thin film on the heater. The thickness of Sn thin film deposited by thermal evaporation was $4000{\AA}$ and the thickness of Pt deposited by D. C. sputtering on Sn thin film was $14{\sim}71{\AA}$ range. The XRD analysis show that the $Pt-SnO_{2-x}$ thin films are formed by grains with a diameter of about $200{\AA}$ randomly connected and the crystalline phase of the thin films are preferentally oriented in the (110) direction. $Pt-SnO_{2-x}$ thin film device (Pt thickness : $43{\AA}$) to 6000 ppm CO shows the sensitivity of 80% and high selectivity to CO. And the operating temperature and the thermal oxidation temperature of $Pt-SnO_{2-x}$ thin film device with high sensitivity to CO were $200^{\circ}C$ and $500^{\circ}C$, respectively.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.33-43
• /
• 2002

The world is in the great change by the digital revolution and is changing fast to knowledge-based society beyond information society. That is to say, Knowledge is the most powerful source of competitiveness. This change of environment needs new paradigm in design. As of today, There is need to study systematically and approach practically about knowledge management. So that, we are intend to reconstruct theoretical system from design-oriented viewpoint and propose knowledge-creation paradigm through the importing technique of knowledge management into design. This study is to develop theoretical frame work of knowledge management in design as a basic study on the implementation of knowledge management for design. By the method of study for this, It was studied literature and precedent. Further more, proposed the appropriate direction of knowledge management implementation in design. Also, It was composed knowledge management system of the infra system, information system, decision-making support system and knowledge competency. Finally, The technical feature of knowledge management system was analyzed from a information technology point of view.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.1
• /
• pp.113-121
• /
• 2014

With the development of information technology, knowledge information-oriented and information systems are being rapidly paced. In addition, doctor's needs of the system that assist decision making is gradually increasing. Because the complex process of decision-making should be a lot. We propose a web based system for supporting medical treatment based on Korean medicine ontology. There are three kinds of processes. First, a pattern is decided for patient' symptoms, a formula for the pattern is selected and medicinal materials constituting the formula is added or removed. Second, a formula is decided for patient' symptoms, medicinal materials constituting the formula is added or removed. Third, a Treat method is decided for patient' symptoms, medicinal materials constituting the formula is added or removed. We have designed and implemented the clinical decision support system that supports flexible processes and necessary information and functions. The system shows the appropriate form of ontology knowledge as interrelated and provide analysis and processing, does not show simply search. The system is one of the systems utilizing ontology and a web based system that can be used in anywhere. Therefore, This system Will be useful as for doctors to make decision.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.343-347
• /
• 2007

Fe thin films exhibited (100) preferential orientation when they were deposited at low deposition rate of $0.1{\AA}/s$ on glass substrates by using facing target sputtering system. The (100) oriented Fe layer induces (100) orientation of Pt layer deposited on it owing to hetero-epitaxial growth. After annealing at $600^{\circ}C$ in $H_2$ atmosphere, FePt films exhibited f.c.t. (001) texture in the whole film caused by inter-diffusion between atoms. We have also confirmed that the homogeneously inter-diffused compositional modulation in the film after the annealing process. Furthermore, annealing process in $Ar+H_2$ atmosphere at $400^{\circ}C$ during Pt deposition was effective for attaining Pt (100) texture. The annealing process during Pt deposition also induced in low annealing temperature and decreased annealing time for attaining the FePt f.c.t. (001) structure.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.107-119
• /
• 2011

The rate of disposable diaper usage has been increased continuously from convenience of disposable diapers and increment of women's entry in workforce. However, a new perspective toward disposable diapers has been come to the fore in various sides like babies' health, environment, and cost. Furthermore, cloth diaper has started to attract more attention. Since parents and grandparents pay more attention to children as birth rate dropped, they tend to purchase expensive goods if the quality or design of the goods is worthy enough. Therefore, this study has the purpose in presenting the basic data for developing functional and pleasant cloth diaper with analyzing the consuming patterns (convergence in nature, health and technology) and cloth diaper characteristics. The research on the actual condition about children cloth diapers and environmental-friendly materials is as follows. Firstly, as a result of analyzing pros and cons about disposable diapers and cloth diapers, the cloth diapers are estimated to have better health, environment, and cost factors than disposable diapers, only excluding convenience. Secondly, as a result of examining patent registered diapers, the disposable diapers have been improved from shape-centered development to well-being material development, and the cloth diapers have mainly developed functional shape-centered. Thirdly, as a result of analyzing children's goods made with environmental-friendly materials, the children's clothes already use organics and natural resources like beans, bamboo trees, ginkgo, and chitosan. Recently, the diaper industry starts to pay attention to environmental-friendly because the skin ailment from environmental pollution has been an issue. To conclude, children's cloth diaper should be appropriate to their body shape and optimized to have convenient form and functional materials. If environmental-friendly materials are used, quality, functionality, various demands from customers and vitalization of goods industry will be all satisfied.

• Journal of Gifted/Talented Education
• /
• v.25 no.3
• /
• pp.401-420
• /
• 2015

The purpose of this study was to perform a comparative analysis of the research trends in STEAM education in gifted education and suggest educational implications to improve the current STEAM education for the gifted. The results were as follows. First, STEAM education has been increasing in the past couple of years and gifted and talented education took up relatively high proportion of it. This demonstrates that gifted education closely related to creative and versatile individuals plays a leading role in STEAM education. Second, researches on STEAM education and STEAM education for the gifted targeted elementary school students the most. Third, researches on the development of STEAM program for the gifted have been mainly addressing science-oriented convergence programs. Among them, programs including all the five combined factors(Science, Technology, Engineering, Arts and Mathematics) were the most common. In terms of learning types, a criterion-referenced teaching-learning model has been developing and there were diverse learning types which applied teaching-learning models tailored to characteristics of a gifted child. The researches related to STEAM programs'application effects on creativity were most dominant.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.49-59
• /
• 2012

This study is aimed to increase the fire-fighting manpower utilization and the increasing of its services in aging society. Due to continuous improvement of living standards and development of medical technology, the elderly population rate is being increased and it brings rapid progresses of aging society. Therefore, as a fire-fighting organization which is responsible for safety from various disasters, they should grasp comprehensively and systematically exact status of weak person from disaster in perspective of it with conjunction of all concerned department and at the same time proceed to speedy move as well as determine the appropriate emergency measures. In order to do this, safe life education for elderly people and the comprehensive measures of home security should be taken by transforming the policy from particular object-oriented policy to demand-driven policy. And through the expansion of one one nine services such as using grandeur of powerful IT nation out of old-fashioned promotion way, they should provide fire-fighting service for convenient and comfortable life of elderly people after retirement. A consideration of the elderly people is the best way to penetrate a advancement fire-fighting in aging society.