• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.337-343
• /
• 2020

Oxide dispersed strengthened (ODS) steel is an important candidate for Gen-IV reactors. Oxide embedded in Fe can help to trap irradiation defects and enhances the strength of steel. It was observed in this study that the size of oxide has a profound impact on the depinning mechanism. For smaller sizes, the oxide acts as a void; thus, letting the dislocation bypass without any shear. On the other hand, oxides larger than 2 nm generate new dislocation segments around themselves. The depinning is similar to that of Orowan mechanism and the strengthening effect is likely to be greater for larger oxides. It was found that higher shear deformation rates produce more fine-tuned stress-strain curve. Both molecular dynamics (MD) simulations and BKS (Bacon-Knocks-Scattergood) model display similar characteristics whereby establishing an inverse relation between the depinning stress and the obstacle distance. It was found that (110)_oxide || (111)_Fe (oriented oxide) also had similar characteristics as that of (100)_oxide || (111)_Fe but resulted in an increased depinning stress thereby providing greater resistance to dislocation bypass. Our simulation results concluded that critical depinning stress depends significantly on the size and orientation of the oxide.

• Journal of Science and Technology Studies
• /
• v.13 no.2
• /
• pp.1-35
• /
• 2013

The aim of this article is to criticize the discourses and practices of the appropriate technology for international development cooperation in Korea which focus narrowly on the technologies and are oriented to the providers of technologies. To present an alternative, we will discuss the appropriate technology by the insights from 'socio-technical system' studies which underline not only technological side but also the social, institutional and user's side, and analyze the interactions between them. This research deals with several cases mainly regarding small scale's renewable energy from Laos, Thailand, Bangladesh, Mongolia and Nepal. We put out some suggestions to improve the discourse and practices of appropriate technology in field of international cooperation by Korea.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.457-469
• /
• 2012

Purpose: The purpose of this study is analyzing how much students of dental technology possess core competencies and cognition between dental technicians and students. Methods: The subjects of this study were dental technicians, dental technology students and a self-administered structured questionnaire survey wax conducted for 428 selected people. Collected data were analyzed using SPSS Win 20.0 statistics program and analysis techniques include the frequency, t-test, One-way ANOVA. Results: The results of the survey are as follows. The cognition of key competency according to the gender in the students showed differences in interpersonal ability, information ability and the requirement of key competency according to the gender in the students showed differences in speaking ability, listening ability, problem solving ability. The cognition of key competency according to the grade in the students showed difference in speaking ability, listening ability and the requirement of key competency according to the grade in the students showed difference in comprehension of organization ability. The speaking ability is the lowest in the cognition of key competency according to the gender, grade, experience of clinical training in the students and the skill ability is the highest in the requirement of key competency according to the gender, experience of clinical training in the students. The cognition of key competency according to the career in the dental technicians showed difference in problem solving ability, self-regulation and self-development ability, skill ability and the requirement of key competency according to the career in the dental technicians showed difference in writing ability. The cognition of key competency according to the educational background in the dental technicians showed difference in comprehension of organization ability. The foreign language ability is the lowest in the cognition of key competency according to the career, job in the dental technicians and the skill ability is the highest and the math ability is th lowest in the requirement of key competency according to the career, place of employment in the dental technician. Conclusion: This study can be used as basic data for dental technology that are available not only to field-oriented disciplines but also to overall higher education fields which aim to strengthen key competency.

• Information Systems Review
• /
• v.12 no.2
• /
• pp.167-187
• /
• 2010

The governmental R&D projects have put a great emphasis on returns on R&D investment through development of market- and customer-oriented technologies and their commercialization. A successful commercialization of the technology developed from a R&D project relies on development of the technology intriguing customers, establishment of effective commercialization strategies throughout the stages of R&D planning and development, and interactive communication between the technology developer and a private company that will do a business with the technology. The business modeling helps accomplish the requirements for the successful commercialization. The past literature about technology commercialization does not provide a systematic procedure in developing a business model for the governmental R&D project. In this study, we proposed a systematic procedure developing a business model integrating peculiar characteristics of governmental R&D and viewpoints of technology developers and professionals of technology commercialization. It can be a useful guideline for developing a business model for the governmental R&D project.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.3
• /
• pp.91-106
• /
• 2007

The purpose of this study was to provide the information for the development of gender-equality oriented content of Technology Home Economics subject. For this purpose, a total of 404 male and female middle high school students in Chuncheon city were sampled and asked to estimate the degree of practical use and preference for the 47 units of Technology Home Economics subject. Results were summarized as following : 1. The 47 units were classified into 4 groups on the basis of similarity in the degree of practical use and preference: 23 units estimated as 'better than average' by male and female students were classified into group 1; 4 units estimated as 'better than average' by female students but as 'less than average' by male students were classified into group 2; 10 units estimated as 'less than average' by male and female students were classified into group. 3; 10 units estimated as 'far less than average' by male and female students were classified into group 4. Most of the units in Home Economics area were classified Into group 1 or 2, but most of the units in Technology area were classified into group 3 or 4. 2. Gender difference was confirmed between male and female students' estimation of the degree of practical use and preference for the 47 units. In about three-quaters of the units in Home Economics area, female students' estimation of the degree of practical use and preference was higher than male students' estimation. In about half of the units in Technology area, male students' estimation of the degree of practical use and preference was higher than female students' estimation. However, possibility was detected in several units of Technology Home Economics subject that gender difference could be decreased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.456-456
• /
• 2013

We report the modifications in the electronic structureof ZnO thin films induced by swift heavy ion (SHI) irradiated ZnO thin films by using near edge X-ray absorption fine structure (NEXAFS) spectroscopy at O K-edge was performed at BL10D XAS-KIST beamline at Pohang Accelerator Lab (PAL). ZnO films of 250 nm thickness oriented in [200] plane deposited by RF magnetron sputtering using equal $Ar:O_2$ atmosphere and air annealed at $500^{\circ}C$ for 6 hours for stability were irradiated with 120 MeV Au and 100 MeV O beams separately with different doses ranging from $1{\times}10^{11}$ to $5{\times}10^{12}$ ions/$cm^2$. High Resolution X-ray diffraction and NEXAFS analysis indicates significant changes in the electronic structure and the SHI effect is different for Ag and O-beams. The NEXAFS measurements provide direct evidence of O 2p and Zn 3d orbital hybridization. The NEXAFS results will be presented in detail.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.29-38
• /
• 2015

In this paper, scale efficiencies and relative efficiencies of R&D projects in Industrial Technology Program, sponsored by Ministry of Trade, Industry and Energy, Korea, are calculated and compared. For the process, various DEA (Data Envelopment Analysis) models are adopted as major techniques. For DEA, two stage input oriented models are utilized for calculating the efficiencies. Next, the calculated efficiencies are grouped according to their subprograms (Industrial Material, IT Fusion, Nano Fusion, Energy Resources, and Resources Technology) and recipient types (Public Enterprise, Large Enterprise, Medium Enterprise, Small Enterprise, Lab., Univ., and etc.) respectively. Then various subprograms and recipient types are compared in terms of scale efficiencies (CCR models) and relative efficiencies (BCC models). In addition, the correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies is calculated, from which the causal relationship between them can be inferred. Statistical analysis shows that the amount of input, in general, should increase in order to be scale efficient (CCR models) regardless of the subprograms and recipient types, that the 1st and 2nd stage relative efficiencies are different in terms of the programs and recipient types (BCC models), and that there is no significant correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies. However, the results should be used only as reference because the goal each and every subprogram has is different and the situation each and every recipient type faces is different. In addition, the causal link between the 1st stage relative efficiencies and the 2nd relative efficiencies is not considered, which, in turn, is the limitation of this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.153-161
• /
• 2015

In the present study, as part of the technology development (Quality of Life Technology, QoLT) to improve the socio-economic status of people with disabilities as an extension of these studies, we propose the development of the smart wheelchair system and navigation technology for stable and safe driving in various environments. For the disabled and the elderly make driving easy and convenient with manual/autonomous driving condition, we firstly develop the user-oriented smart wheelchair system with optimized sensors for environment recognition, and then we propose a navigation framework of a hierarchical structure to ensure real-time response, as well as driving stability when traveling to various environmental changes, and to enable a more efficient operation. From the result of several independent experiments, we ensure efficiency and safety of smart wheelchair and its navigation system.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.475-481
• /
• 2018

Selective laser melting (SLM), a type of additive manufacturing (AM) technology, leads a global manufacturing trend by enabling the design of geometrically complex products with topology optimization for optimized performance. Using this method, three-dimensional (3D) computer-aided design (CAD) data components can be built up directly in a layer-by-layer fashion using a high-energy laser beam for the selective melting and rapid solidification of thin layers of metallic powders. Although there are considerable expectations that this novel process will overcome many traditional manufacturing process limits, some issues still exist in applying the SLM process to diverse metallic materials, particularly regarding the formation of porosity. This is a major processing-induced phenomenon, and frequently observed in almost all SLM-processed metallic components. In this study, we investigate the mechanical anisotropy of SLM-produced 316L stainless steel based on microstructural factors and highly-oriented porosity. Tensile tests are performed to investigate the microstructure and porosity effects on mechanical anisotropy in terms of both strength and ductility.

• Advances in robotics research
• /
• v.2 no.3
• /
• pp.201-217
• /
• 2018

Agriculture production is a critical human intensive task, which takes place in all regions of the world. The process to grow and harvest crops is labor intensive in many countries due to the lack of automation and advanced technology. Much of the difficult, dangerous and dirty labor of crop production can be automated with intelligent and robotic platforms. We propose an intelligent, agent-oriented robotic team, which can enable the process of harvesting, gathering and collecting crops and fruits, of many types, from agricultural fields. This paper describes a novel robotic organization enabling humans, robots and agents to work together for automation of gathering and collection functions. The focus of the research is a model, called HARMS, which can enable Humans, software Agents, Robots, Machines and Sensors to work together indistinguishably. With this model, any capability-based human-like organization can be conceived and modeled, such as in manufacturing or agriculture. In this research, we model, design and implement a technology application of knowledge-based robot-to-robot and human-to-robot collaboration for an agricultural gathering and collection function. The gathering and collection functions were chosen as they are some of the most labor intensive and least automated processes in the process acquisition of agricultural products. The use of robotic organizations can reduce human labor and increase efficiency allowing people to focus on higher level tasks and minimizing the backbreaking tasks of agricultural production in the future. In this work, the HARMS model was applied to three different robotic instances and an integrated test was completed with satisfactory results that show the basic promise of this research.