• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.157-165
• /
• 2018

Companies conduct R&D for continuous development and enhancement of corporate value, and obtain patents as an intangible asset resulting from this process. This study screened 103 medical device firms whose R&D information, patent information, and management performance information were all published to determine how R&D activities and patents affect corporate operational performance. The number of patents, R&D costs, company type and Inno-Biz of the company were set as independent variables, and the companies' sales, intangible assets, operating profit ratios, net profit margins, corporate ratings and profit-related financial ratios were used as dependent variables. The results confirmed that R&D expenditure had negative (-) effects on most indicators, including sales volume, operating profit ratio, and net profit ratio, while it had positive (+) [ED highlight - these are unnecessary if negative and positive are also written out.] effects only on intangible assets. Additionally, domestic patents were found to have negative (-) effects on sales, cash flow ratings, and dropped capital return, and positive (+) effects on net profit growth. Moreover, the business performance variables affected by the company characteristics were sales volume and cash flow ratings. The medical device industry is dominated by small and medium-sized businesses Although research and development activities and patents have been shown to have a negative impact on corporate management in the short term, they are expected to have a positive long-term impact when reflecting the characteristics of the medical device industry that must undergo clinical trials and authorization procedures after R&D.

• KSBB Journal
• /
• v.17 no.4
• /
• pp.370-375
• /
• 2002

Isolation of a gene and determination of its expression pattern are essential in understanding its function. Among the genes localized in 12ql3, stSG3435 EST was chosen to study its expression pattern. The full-length CDNA was cloned by screening of human brain CDNA library and its sequence was determined by serial deletion followed by automated sequencing of the clones with overlapping fragments. The sequence analysis revealed that stSG 3435 CDNA displayed 100% identity to human MYGI and 86% identity to mouse melanocyte proliferation gene-1 (Gamm 1) originally identified from melanocyte, suggesting that MYGI determined by Northern blot analysis revealed the strongest expression in testes with ubiquitous expression in all the tissues tested. In order to investigate the cellular localization of its protein product, the green fluorescence protein gene was fused into the full-length coding sequence of MYGI, Transfection of the fusion construct followed by confocal microscopy resulted in the green fluorescence signal as a punctate state in cytoplasm indication that MYGI was localized in one of the cellular organelles.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.755-770
• /
• 2023

Due to recent severe climate change, abnormal weather phenomena, and other factors, the frequency and magnitude of natural disasters are increasing. The need for disaster management using artificial satellites is growing, especially during large-scale disasters due to time and economic constraints. In this study, we have summarized the current status of next-generation medium-sized satellites and microsatellites in operation and under development, as well as trends in satellite imagery analysis techniques using a large volume of satellite imagery driven by the advancement of the space industry. Furthermore, by utilizing satellite imagery, particularly focusing on recent major disasters such as floods, landslides, droughts, and wildfires, we have confirmed how satellite imagery can be employed for damage analysis, thereby establishing its potential for disaster management. Through this study, we have presented satellite development and operational statuses, recent trends in satellite imagery analysis technology, and proposed disaster response strategies that utilize various types of satellite imagery. It was observed that during the stages of disaster progression, the utilization of satellite imagery is more prominent in the response and recovery stages than in the prevention and preparedness stages. In the future, with the availability of diverse imagery, we plan to research the fusion of cutting-edge technologies like artificial intelligence and deep learning, and their applicability for effective disaster management.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.449-467
• /
• 2013

Contemporary 21st century, the rapid development of technology has achieved due to the emergence of various digital devices, a variety of media to the diversification of the limits of visual representation is reduced. Therefore, the combination of technology and art, visual arts, giving limits of getting it free to the public will feel fresh new visual impact. Such a new approach to light of a combination of technology and art, a variety of fine art and motion picture of the visual arts, such as has been recognized as a new genre. Of the resolution of the projector by utilizing the current reality and unreality beyond the boundaries of the building or structure in the city, as a schematic design of the screen projected structure and mapping of the art technology in an attempt to integrate recent has been studied in various ways. The projected structure design and the mapping of the art technology in an attempt to incorporate recent research has been diverse. In this study, as a new technology of a projection mapping to study the technique of looking for the definition of mapping practices to maximize the effectiveness of Visual Perception 3D animation was applied to a case study. A combination of 3D animation and project mapping in the future the fusion of art and technology to meet the zeitgeist with new possibilities of visual art to create synergies that is expected.

• Korea Science and Art Forum
• /
• v.23
• /
• pp.149-162
• /
• 2016

Here are background, method, scope, main contents of this research. As the interests increased in recent about the construction in complex and diverse areas, construction is locally connected to human life like to coexistence of the technology and culture. The local development should not be fragmentary construction to improve local recycling ability. Local society should be inherited by modern cultural perspective through a variety of local culture and coexistence. Effective decision making analysis is necessary to build a livable area with a combination of high-tech industry. For this reason, this paper will study the political analysis for decision making at the planning stage of construction in point of fusion of technology and culture by using unstructured data analysis. Conclusion is as in the following. Local planning stage of construction describes diverse meanings of intangible and intangible factors as political factor. Technology factors have various qualitative and quantitative factors in construction field. Understanding decision making at the planning stage of construction means not only visible 'technology factor' such as structure, method, shape, and so on, but also invisible 'culture factor' such as spirit of age, religion, learning, and life-style reflected in formation process of space, and insight of brain power about art.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.422-429
• /
• 2011

Dependence of radical and ion density on electron density and temperature is numerically investigated for $Cl_2$/Ar, $CF_4$, $CF_4/O_2$, $CF_4/H_2$, $C_2F_6$, $C_4F_8$ and $SF_6$ discharges which are widely used for etching process. We derived a governing equation set for radical and ion densities as functions of the electron density and temperature, which are easier to measure relatively, from continuity equations by assuming steady state condition. Used rate coefficients of reactions in numerical calculations are directly produced from collisional cross sections or collected from various papers. If the rate coefficients have different values for a same reaction, calculation results were compared with experimental results. Then, we selected rate coefficients which show better agreement with the experimental results.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.743-754
• /
• 2023

The global occurrence of myriad natural disasters and incidents, catalyzed by climate change and extreme meteorological conditions, has engendered substantial human and material losses. International organizations such as the International Charter have established an enduring collaborative framework for real-time coordination to provide high-resolution satellite imagery and geospatial information. These resources are instrumental in the management of large-scale disaster scenarios and the expeditious execution of recovery operations. At the national level, the operational deployment of advanced National Earth Observation Satellites, controlled by National Geographic Information Institute, has not only catalyzed the advancement of geospatial data but has also contributed to the provisioning of damage analysis data for significant domestic and international disaster events. This special edition of the National Disaster Management Research Institute delineates the contemporary landscape of major disaster incidents in the year 2023 and elucidates the strategic blueprint of the government's national disaster safety system reform. Additionally, it encapsulates the most recent research accomplishments in the domains of artificial satellite systems, information and communication technology, and spatial information utilization, which are paramount in the institution's disaster situation management and analysis efforts. Furthermore, the publication encompasses the most recent research findings relevant to data collection, processing, and analysis pertaining to disaster cause and damage extent. These findings are especially pertinent to the institute's on-site investigation initiatives and are informed by cutting-edge technologies, including drone-based mapping and LiDAR observation, as evidenced by a case study involving the 2023 landslide damage resulting from concentrated heavy rainfall.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.13-13
• /
• 2014

Two kinds of mushrooms, Gumji (金芝; Ganoderma) and Soji, were described in old book of Samguksagi (History of the three kingdoms; B.C 57~A.D 668; written by Bu Sik Kim in 1145) in Korea-dynasty. Many kinds of mushrooms were also described in more than 17 kinds of old books during Chosun-dynasty (1392~1910) in Korea. Nowadays, mushroom cultivation has been increased through out the world last decade years. Production of mushrooms has also been increased 10-20% and many varieties have been cultivated. Similar trends were also observed in Korea. Approximately two hundred commercial strains of 37 species in mushrooms were developed and distributed to cultivators. Somatic hybrid variety of oyster mushroom 'Wonhyeong-neutari' were developed by protoplast fusion, and distributed to grower in 1989. The fruiting body yield index of somatic hybrids of Pleurotus ranged between 27 and 155 compared to parental values of 100 and 138. In addition, more diverse mushroom varieties such as Phellinus baumi, Auricularia spp., Pleurotus ferulae, Hericium erinaceus, Hypsizigus marmoreus, Grifola frondosa, Agrocybe aegerita and Pleurotus cornucopiae have been attempted to cultivate in small scale cultivation. Production of mushrooms as food was 190,111 metric tons valued at 800 billion Korean Won (one trillion won if include mushroom factory products; 1dollar = 1,040 Won) in 2011. Major cultivated species are Pleurotus ostreatus, Pleurotus eryngii, Flammulina velutipes, Lentinula edodes, Agaricus bisporus, and Ganoderma lucidum, which cover 90% of total production. Since mushroom export was initiated from 1960 to 1980, the export and import of mushrooms have been increased in Korea. Technology developed for liquid spawn production and automatic cultivation systems lead to the reduction of the production cost resulting in the increasement of mushroom export. However some species were imported because of high production cost for these mushrooms requiring the effective cultivation methods. Developing of effective post-harvest system will be also directly related to mushroom export. In academic area, RDA scientists have been conducting mushroom genome projects. One of the main results is the whole genome sequencing of Flammulina velutipes for molecular breeding. An electrophoretic karyotype of of F. velutipes was obtained using CHEF with 7 chromosomes, with a total genome size of approximately 26.7 Mb. The mususcript of the genome of F. velutipes was published in PLOS ONE this year. For medicinal mushrooms, we have been conducting the genome research on Cordyceps and its related species for developing functional foods using this mushroom. In 2013, Korea Food and Drug Administraion (KFDA) approved Cordyceps mushroom for its value as an immune booster.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.353-365
• /
• 2012

This study is understanding characteristics and analyzing contributions of the odor causing compounds of complex-odor & major specified odor materials, and contribution analysis, caused pre-treatment facilities(input and storage) and post-treatment facilities(heating and drying). The target of this study is feeds-production-facilities, located in Seoul. The averaged complex-odor compounds on the boundary line is 21 times higher, and it is 15 times higher than emission standards. In cracking&collection(pre-treatment facilities), the concentration of compounds is 4,881 times, 2,080 times in drying, and 1,442 times in putting&storing facilities. Ammonia occupies the largest portion of the results of monitoring specified odor compounds in input&storage facilities, followed Acetaldehyde > Hydrogen sulfide > Methyl mercaptan. In cracking&collection, Ammonia also occupies most of odor compounds, followed Methyl mercaptan > Acetaldehyde > Dimethyl disulfide > Dimethyl sulfide > Hydrogen sulfide. Acetaldehyde > Methyl mercaptan in drying facilities. On the boundary line, however, the concentration of specified odor compounds stays below emission standards. The result of contribution analysis is that methyl mercaptan has the highest contribution in input & storage, as well as cracking&collection facilities, followed Acetaldehyde > Hydrogen sulfide > Dimethyl sulfide > Dimethyl disulfide. In the drying facilities, the contribution shows Methyl mercaptan > Acetaldehyde > i-Valeraldehyde and Butyraldehyde. Therefore, to decrease odor in foodwaste treatment facilities, proper prevention facilities need to be installed and operated, according to characteristics of individual odor compounds, based on monitored data.