• International Journal of Internet, Broadcasting and Communication
• /
• 제10권2호
• /
• pp.45-50
• /
• 2018

Recently the water management department advised the water treatment industry to focus on deploy the chemical free and the environmentally responsible process to adopt on water treatment plants in every country. In this objective, water treatment process started using ultrasonic based phycocyanin extraction with fluorescence measurement techniques to detect the change in the yield of phycocyanin. This paper propose the design of optical filter model for fluorescence technique based immersive optical phycocyanin measurement sensor design. The proposed design uses the multi-wavelength sensor module for irradiating part, and this plays a role of removing a wavelength band other than 590 ~ 620 nm. The preliminary study on immersed phycocyanin sensor, the fluorescence value of picocyanin according to the ultrasonic intensity, treatment time and number of cells was measured using JM phycocyanin module to emulate the proposed design, and were compared performance of the proposed sensor emulation. In this design, the phycocyanin fluorescence value increased about 2.1 ~ 4.7 times as the ultrasonic treatment time increased as compared with JM phycocyanin module, and the phycocyanin fluorescence value within the analysis range was obtained by ultrasonic treatment within one minute.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.768-778
• /
• 2011

Calixpyrroles and related macrocycles are non-planer synthetic anion receptors that have attracted considerable attentions in recent years. Although the synthesis of calix[4]pyrrole (known as meso-octamethylporphyrinogen) was reported more than 100 years ago, the anion binding properties were first discovered in 1996. The simple calix[4]pyrroles can be synthesized in single step in high yield by condensation of pyrrole with acetone. The compounds showed preferential binding for halide anions including fluoride, phosphate, carboxylate, and chloride in organic media. Efforts to improve the anion affinity of calix[4]pyrrole and to enhance its selectivity have led to the synthesis of a variety of new calixpyrrole derivatives. Among the various modifications, introduction of straps on one side of the calix[4]pyrroles are the most effective. Incorporation of aromatic rings other than pyrroles also exhibited interesting binding behaviour. Introduction of signalling units as part of the strapping element enable to detect the anions on chromogenic or fluorogenic fashion. Finding of the anion transport properties across the membrane and cytotoxic effects of the calix[4]pyrroles open new window for calixpyrrole-related research. The polymer-incorporated systems have also been employed as anion complexants in solvent-solvent extraction. These old, yet easy-to-make macrocycles have well advanced more recently with the discovery of the ion-pair complexation properties. In this review, the synthetic developments and anion binding properties of calixpyrroles for the last decades will be discussed and will cover the advances in calixpyrrole chemistry.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.64-71
• /
• 2010

This paper summarizes the development of an ART control system panel with a touch screen and sensors to measure the roll and roll rate of ships. The control system hardware consists of two micro-processors, analog and digital I/O circuits, various relay circuits, etc. Sensor fusion and moving cross algorithms are implemented to accurately estimate the roll angle and roll period. In addition, the control system adopts a fault detection algorithm to inform users of ART system faults. A touch screen in the control panel can display the ART system states and faults. The performance of the developed system was verified on real sea trials.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• 센서학회지
• /
• 제14권2호
• /
• pp.116-124
• /
• 2005

In this paper range measurement systems are designed using an ultrasonic sensor and a camera. An ultrasonic sensor provides the range measurement to a target quickly and simply but its low resolution is a disadvantage. We tackle this problem by employing a camera. Instead using a stereoscopic sensor, which is widely used for 3D sensing but requires a computationally intensive stereo matching, the range is measured by focusing and structured lighting. In focusing a straightforward focusing measure named as MMDH(min-max difference in histogram) is proposed and compared with existing techniques. In the method of structure lighting, light stripes projected by a beam projector are used. Compared to those using a laser beam projector, the designed system can be constructed easily in a low-budget. The system equation is derived by analysing the sensor geometry. A sensing scenario using the systems designed is in two steps. First, when better accuracy is required, measurements by ultrasonic sensing and focusing of a camera are fused by MLE(maximum likelihood estimation). Second, when the target is in a range of particular interest, a range map of the target scene is obtained by using structured lighting technique. The systems designed showed measurement accuracy up to 0.3[mm] approximately in experiments.

• 한국정보통신학회논문지
• /
• 제13권7호
• /
• pp.1357-1362
• /
• 2009

최근 멀티미디어 콘텐츠가 빠르게 확산되고, 초고속 광대역 IP 네트워크 기술이 발전하면서 통신과 방송의 독자적 개별 서비스가 서로 공존하여 통합융합 서비스로 진화발전하고 있다. 대표적 방송/통신 융합 서비스인 IPTV는 통합융합서비스의 가장 강력한 응용분야이며, IPTV와 같은 서비스들이 증가함으로 인해 다양한 인터넷 서비스를 구현하기 위해서 인터넷 프로토콜을 통한 고화질의 데이터 처리에 대한관심이 통신업계의 화두로 등장하고 있다. 본 연구에서는 소규모에서 사용되는 표준 라우팅 프로토콜인, RIP 환경과 대규모 자율 네트워크에서 사용되는 링크 상태 라우팅 프로토콜인, OSPF 환경을 구현하여 IPTV 서비스 중에서 방송 화질의 PSNR값으로 성능을 측정하고 평가하여 효율적인 IPTV 서비스를 위한 네트워크 구축 방안을 제시하고자 한다.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1345-1356
• /
• 2021

Damage to nuclear power plants causes human casualties and environmental disasters. There are electrical facilities that control safety-related devices in nuclear power plants, and seismic performance is required for them. The 2016 Gyeongju earthquake had many high-frequency components. Therefore, there is a high possibility that an earthquake involving many high frequency components will occur in South Korea. As such, it is necessary to examine the safety of nuclear power plants against an earthquake with many high-frequency components. In this study, the shaking table test of electrical facilities was conducted against the design earthquake for nuclear power plants with a large low-frequency components and an earthquake with a large high-frequency components. The response characteristics of the earthquake with a large high-frequency components were identified by deriving the amplification factors of the response through the shaking table test. In addition, safety of electrical facility against the two aforementioned types of earthquakes with different seismic characteristics was confirmed through limit-state seismic tests. The electrical facility that was performed to the shaking table test in this study was a motor control center (MCC).

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.7-7
• /
• 2019

우리나라에서의 대마는 마약류로 분류되어 기호용과 의료용 모두 법적인 제재를 받아왔으나 최근에 의료용 대마가 법적으로 허용이 되어 환자들에게 처방 받을 수 있게 되었다. 하지만 우리나라 사람들에게 대마는 환각성분을 가진 마약류로 깊이 인식되어 왔으며 의료용 대마에 대한 연구는 거의 전무한 실정이다. 노지재배에서 발생할 수 있는 범죄의 위험성, 자연교배에 의한 품질저하를 피할 수 있으며 재배조건(양액, 광조건, 광주기, 대기환경조성) 등을 제어할 수 있는 밀폐형 LED 식물공장은 의료용 대마 생산에 제일 적합한 모델이 될 수 있다. 식물체의 광합성은 가시광선 중 특정 파장 450nm 청색광과 660nm 적생광을 주로 이용하며 'LED (Light Emitting Diode) 발광다이오드'는 식물체의 광합성에 적합한 파장으로 광원을 조사할 수 있는 장점이 있다. 이러한 LED를 이용한 광합성은 식물체의 2차 대사물질 Anthocyanins, phenolic compounds 등의 향상과 생육에도 긍정적인 영향을 미치며 식물 뿐만 아니라 광합성을 하는 미세조류(micro algae)에서도 이용이 가능하며 해마토 코쿠스(Hematococcus)의 세포증식과 항산화물질 아스타잔틴(astaxathin)생산에 유용하게 쓰이고 있다. 최근 미국과 다른 나라에서도 기호용, 의료용 대마사업에 대한 관심이 높아지고 있으며 캐나다와 미국에서는 밀폐형 유리온실과 식물공장을 이용한 의료용 대마를 생산, 추출, 가공까지 하여 산업적인 영역을 넓히고 있는 실정이다. 특히, 실내재배에서는 광원이 필수적인 요소이며 식물생육에 선택적인 파장을 조사할 수 있는 LED와 재배조건을 정밀하게 제어할 수 있는 밀폐형 식물공장을 이용한 의료용 대마 생산에 대한 연구가 절실히 필요한 시점이다.

• 산경연구논집
• /
• 제13권10호
• /
• pp.1-8
• /
• 2022

Purpose: Support vector machines (SVMs) ensemble has been proposed to improve classification performance of Credit risk recently. However, currently used fusion strategies do not evaluate the importance degree of the output of individual component SVM classifier when combining the component predictions to the final decision. To deal with this problem, this paper designs a support vector machines (SVMs) ensemble method based on fuzzy integral, which aggregates the outputs of separate component SVMs with importance of each component SVM. Research design, data, and methodology: This paper designs a personal credit risk evaluation index system including 16 indicators and discusses a support vector machines (SVMs) ensemble method based on fuzzy integral for designing a credit risk assessment system to discriminate good creditors from bad ones. This paper randomly selects 1500 sample data of personal loan customers of a commercial bank in China 2015-2020 for simulation experiments. Results: By comparing the experimental result SVMs ensemble with the single SVM, the neural network ensemble, the proposed method outperforms the single SVM, and neural network ensemble in terms of classification accuracy. Conclusions: The results show that the method proposed in this paper has higher classification accuracy than other classification methods, which confirms the feasibility and effectiveness of this method.