• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.932_933
• /
• 2009

A technology based on thyristors will be used to manufacture the super-conducting coil AC/DC converters because of the low ratio of cost over installed power compared to a design based on GTO or similar technology. But phase-controlled converter suffers from fundamental disadvantage. They inject current harmonics into the input ac mains due to their nonlinear characteristics, thereby distort the supply voltage waveform, and demand reactive power from the associated ac power system at retarded angles. To overcome this disadvantage, in the case of two series converters at the DC side, connected to the same step-down transformer, apply for the sequence control. It is the most simple and efficient way to reduce the reactive power consumption at low cost. Analytical sequence control algorithm is suggested, the validity of the proposed scheme has been verified by experimental results with the small-scaled International Thermonuclear Experimental Reactor (ITER) Power Supply to minimize reactive power consumption.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.778-782
• /
• 2007

This study assessed the effects of the antimicrobial substances sulforaphane, grapefruit seed extracts (GSE), and reuterin on the expression of Salmonella HilA and InvF virulence gene using a LacZY assay (${\beta}$-galactosidase assay) with hilA:lacZY and invF:lacZY fusion strains of Salmonella typhimurium SL1344. Salmonella was grown for 8 hr at $37^{\circ}C$ in the presence of diluted antimicrobial substances ($2\;{\mu}g/mL$ sulforaphane, $20\{\mu}g/mL$ GSE, and 0.26 mM reuterin) at concentrations that did not inhibit the cellular growth of Salmonella. Sulforaphane inhibited the expression of HilA and InvF by 50-90 and 20-80%, respectively. GSE also inhibited the expression of both genes, but to a lesser degree. Among the 3 antimicrobial substances, reuterin showed the least inhibition, which was abolished after 3-4 hr. None of the antimicrobial substances inhibited the ${\beta}$-galactosidase enzyme activity of S. typhimurium. The assay used in this study represents a very sensitive method for screening bioactive substances that inhibit the expression of virulence genes in Salmonella.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.6
• /
• pp.41-49
• /
• 2016

To evaluate lubrication properties by surface roughness under boundary and mixed lubrication, a new approach is suggested by both asperity flow and contact with stochastic characteristics. Many researchers already have studied the effect of surface roughness on flow. But, it has become important to research of the phenomenon of asperities contact in surfaces because the growth of asperities contact area under heavy load conditions. In this paper, flow factors in the average flow model derived by Patir and Cheng were used, and a multi-asperity contact model was included to calculate lubrication properties of a surface with a randomly generated rough surface. A numerical analysis using the average Reynolds equation with both the average flow model and the asperity contact model was conducted, and the results were compared with those from previous research. The results showed that the influence of asperities on lubrication and the friction coefficient changed rapidly on application of contact model.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.6
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.47-56
• /
• 2010

In navigation, officers receive data about inside and outside of ship from several devices(ex, GPS / AIS / ECDIS / ARPA Radar / etc) in bridge, and use it to recognize and predict safety situations. However, observation work of a officer is still hard for a torrent of data from several devices, and the problem of inconsistent data among the devices. In previous research, we presented the conceptual model of Intelligent Navigation Safety Information System based on information fusion, and showed the example of the conceptual model using CF (Certainty Factor) expert system to solve this problem. The information fusion technology needs various reasoning skills, and CF expert system is not enough to express ambiguous or indefinite factors. In this paper, we propose the concept of an intelligent navigation information fusion using fuzzy expert system to describe the ambiguous factors, and show the validity of applying fuzzy expert system to the Navigation Safety Information System through the design and implementation of the proposed concept.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2021

Recently, additive manufacturing (AM) technology such as powder bed fusion (PBF) and directed energy deposition (DED) are actively attempted as consumers' needs for parts with complex shapes and expensive materials. In the present work, the effect of processing parameters on the mechanical properties of 316L stainless steel coupons fabricated by PBF and DED AM technology was investigated. Three major mechanical tests, including tension, impact, and fatigue, were performed on coupons extracted from the standard components at angles of 0, 45, 90 degrees for the build layers, and compared with those of investment casting and commercial wrought products. Austenitic 316L stainless steel additively manufactured have been well known to be generally stronger but highly vulnerable to impact and lack in elongation compared to casting and wrought materials. The process-induced pore density has been proved the most critical factor in determining the mechanical properties of AM-built metal parts. Therefore, it was strongly recommended to reduce those lack of fusion defects as much as possible by carefully control the energy density of the laser. For example, under the high energy density conditions, PBF-built parts showed 46% higher tensile strength but more than 75% lower impact strength than the wrought products. However, by optimizing the energy density of the laser of the metal AM system, it has been confirmed that it is possible to manufacture metal parts that can satisfy both strength and ductility, and thus it is expected to be actively applied in the field of electric power section soon.

• Korea Science and Art Forum
• /
• v.21
• /
• pp.105-116
• /
• 2015

This study intended to give helps in planning a specialized exhibition by carrying out a survey objecting to KOREA PACK 2015 attendees including visitors who possessed mobile coupons after finishing advance registration through on-line, and then investigating, analyzing satisfactions of attendees together with effects of the specialized exhibition using IT technology. As a lot of relevant preceeding researches have been made by focussing on exhibition organizer and exhibitors, the viewpoints of attendees at the specialized exhibition using IT conversing technology such as mobile and etc. were to be investigated and analyzed. Thus, this research tried to do an empirical identification on effects of the exhibition by analyzing relations between its watching forms and satisfactions including a survey on the on-line PR route utility of IT technology in addition to visiting motives of attendees who watched the exhibition. A summarization of the current study is followed: First, in case of attending in the exhibition for specific purposes, they searched related information positively, and were shown as doing information gathering behaviors and also high possibility on purchases was confirmed. Second, it was confirmed that positive attendees had decision-making on purchases. This finding means that attendees who watch the specialized exhibition have authority and responsibility of being able to purchase in many cases, so methods of improving sales by effectively doing PR on own products and technical competitiveness in the exhibition are necessary to exhibitors. Third, attendees who have specific purposes showed higher satisfactions on the exhibition than general visitors, but satisfactions on consultation, staff attitudes, and facility were turn out to be higher than providing related information on products or technology. Accordingly, the necessity of improving this outcome was confirmed. Therefore, exhibitors have to endeavor in providing more advanced services to attendees of the exhibition by grasping technical trends in advance as well as cultivating professional staff who can promote products well.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.334-343
• /
• 2014

In this paper, we suggest a method to improve the fusion of an accelerometer and gyro sensor by using a Kalman filter to produce a more high-quality respiration signal to supplement the weakness of using a single accelerometer. To evaluate our proposed algorithm's performance, we developed a chest belt-type module. We performed experiments consisting of aerobic exercise and muscular exercises with 10 subjects. We compared the derived respiration signal from the accelerometer with that from our algorithm using the standard respiration signal from the piezoelectric sensor in the time and frequency domains during the aerobic and muscular exercises. We also analyzed the time delay to verify the synchronization between the output and standard signals. We confirmed that our algorithm improved the respiratory rate's detection accuracy by 4.6% and 9.54% for the treadmill and leg press, respectively, which are dynamic. We also confirmed a small time delay of about 0.638 s on average. We determined that real-time monitoring of the respiration signal is possible. In conclusion, our suggested algorithm can acquire a more high-quality respiration signal in a dynamic exercise environment away from a limited static environment to provide safer and more effective exercises and improve exercise sustainability.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.2
• /
• pp.226-229
• /
• 2012

Bacterial hemoglobin from Vitreoscilla (VHb) is recognized as a good fusion protein for the soluble expression of foreign protein. In this study, we generated a monoclonal antibody (MAb) against VHb for its detection. For the rapid screening of MAb, a protein chip technology based on the Alexa-488 (A488) dye labeling method was introduced. In order to fabricate the chip, the VHb protein was chemically coupled to the chip surface and then the culture supernatants of 84 hybridoma cell lines were spotted onto the VHb chip. The bound MAbs were measured by A488-modified anti-mouse IgG. A single spot (MAb A10) exhibited significantly high signal intensity. The immunoblot analysis evidenced that the MAb A10 can detect VHb-fused proteins with high specificity.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.1033-1039
• /
• 1995

The magnetic system design of the KT-2 tokamak has been performed at KAERI. Design goal has been set to facilitate the so-called "advanced tokamak" studies, which is essential to secure the economy of the tokamak fusion reactors. Design features include a large-aspect-ratio machine configuration, long-pulse operation capability with heavy plasma shaping, hybrid magnetic field control and machine/in-vacuum structures for MHD stability.