• 기술혁신학회지
• /
• 제3권3호
• /
• pp.67-84
• /
• 2000

This paper expanded the usefulness of technology relation analysis by applying to R&D activities of Korea Gas Corporation (Kogas) at the corporate level. Technology relation analysis has been applied to assessment of R&D investments in telecommunication and construction industries in Korea. As empirical findings, technology map and technology spillover matrix of Kogas have been derived by technology similarity analysis. It has bee found that various useful information for R&D assessment could be acquired from the technology relation analysis at the corporate level.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.357-378
• /
• 2004

Nonlinear dynamic analysis of a reinforced concrete (RC) frame under earthquake loading is performed in this paper on the basis of a hysteretic moment-curvature relation. Unlike previous analytical moment-curvature relations which take into account the flexural deformation only with the perfect-bond assumption, by introducing an equivalent flexural stiffness, the proposed relation considers the rigid-body-motion due to anchorage slip at the fixed end, which accounts for more than 50% of the total deformation. The advantage of the proposed relation, compared with both the layered section approach and the multi-component model, may be the ease of its application to a complex structure composed of many elements and on the reduction in calculation time and memory space. Describing the structural response more exactly becomes possible through the use of curved unloading and reloading branches inferred from the stress-strain relation of steel and consideration of the pinching effect caused by axial force. Finally, the applicability of the proposed model to the nonlinear dynamic analysis of RC structures is established through correlation studies between analytical and experimental results.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.463-474
• /
• 2019

This paper presents the effect of winding configuration on the kVA rating of a wye-connected autotransformer applied to a 12-pulse rectifier. To describe the winding configuration of the wye-connected autotransformer, position and proportional parameters are defined and their quantitative relation is calculated. The voltages across and currents through the windings are measured under different winding connections. Consequently, a relation between the kVA rating and position parameter is established in accordance with the analysis, and the optimal winding configuration is obtained on the basis of this relation. A wye-connected autotransformer with the least equivalent kVA rating and simplest winding configuration is designed and applied to the 12-pulse rectifier. Simulations and experiments are conducted to validate the theoretical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.260-280
• /
• 2020

Cyber-attacks emerge in a more intelligent way, and various security technologies are applied to respond to such attacks. Still, more and more people agree that individual response to each intelligent infringement attack has a fundamental limit. Accordingly, the cyber threat intelligence analysis technology is drawing attention in analyzing the attacker group, interpreting the attack trend, and obtaining decision making information by collecting a large quantity of cyber-attack information and performing relation analysis. In this study, we proposed relation analysis factors and developed a system for establishing cyber threat intelligence, based on malicious code as a key means of cyber-attacks. As a result of collecting more than 36 million kinds of infringement information and conducting relation analysis, various implications that cannot be obtained by simple searches were derived. We expect actionable intelligence to be established in the true sense of the word if relation analysis logic is developed later.

• 기술혁신연구
• /
• 제13권3호
• /
• pp.27-49
• /
• 2005

In this Paper, we analyzed the relative importance of multiple sources and their effects on innovative activities. Through factor analysis, we found 5 sources of innovative activities; university/laboratory source, within firm source, general information source, vertical/competitive relation source, and horizontal relation source. Through regression analysis, we found that (1) 'within firm source' is the most important source on innovative activities, (2) from inputs' point of view, the more 'vertical/competitive relation source' is, the less innovative activities we, (3) from outputs' point of view, innovations are more activated when 'university/laboratory source' is abundant. but, they are less activated when 'general information source' and 'vertical/competitive relation source' is abundant, and (4) according to firm size and innovation stages(newproduct innovation, upgraded product innovation, and process innovation), the effect of sources on innovative activities is different.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.84-88
• /
• 1997

The Jonhnson-Cook constitutive relation has been used in dynamic plasticities. The constants of the Jonhson-Cook relation of sheet metals for an autobody is not known yet. In this paper, the material properties of SPCEN, SPCC and SPRC in the high strain rate states have been acquired. A new tension split Hopkinson bar was used in high speed tensile tests of sheet metals. The experimental results acquired from the apparatus are used to determine the constants of Johnson-Cook constitutive relation of sheet metals. This results can be used to analysis of crashworthness.

• Journal of Information Science Theory and Practice
• /
• 제1권2호
• /
• pp.84-92
• /
• 2013

In this study, the properties of the object types required to describe the relationship among research data resources, which may be generated during the life cycle of the research, are derived. The properties of Fedora Commons and DSpace, which are open source software used for resource management, and schema properties published in DataCite were analyzed. Based on relation names of Fedora Commons, nine new relation names were derived. Thirty-eight object type properties consolidating the target properties of the analysis were derived. The result of this study can be used as basic material for crosswalk research studies of object type relation terms to ensure interoperability among the systems.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2002년도 춘계학술대회 논문집
• /
• pp.266-269
• /
• 2002

This paper explores a fundamental study of acquiring the users' KANSEI information regarding the recognition of shape models. Since there are many differences such as background differences and knowledge differences among users, they will produce different evaluations based on their KANSEI even when an identical shape model is presented. Cluster analysis is proved to be available for catching a group tendency and for constructing a mapping relation between a description of the shape model and the HANSEl database. In order to investigate an analogical relation and a mutual influence in our consciousness, first, we made a questionnaire that asked subjects to represent images having different colors and shape cones by using 4 pairs of adjectives (KANSEI words). Next, based on the cluster analysis of the questionnaire using a fuzzy set theory, we proposed a hypothesis showing how the analogical relation and the mutual influence work in our mind while viewing the shape models. Furthermore, how the properties of KANSEI depend on their descriptions was also investigated by virtue of the cluster analysis. This work will be valuable to construct a personal KANSEI database regarding the Shape Model Processing System.

• 복식문화연구
• /
• 제22권6호
• /
• pp.1011-1027
• /
• 2014

The purpose of this study is to analyze the factors that lead to continuous use intention of SNS marketing. The research model was designed to investigate the SNS factors that affect use intention based on TAM (Technology Acceptance Model) suggested by Davis (1986). The survey focused on age twenties to thirties male and female who had experience in receiving fashion brands message through Facebook. 329 questionnaires were used to analyze the results of study, and SPSS 12.0 was used to conduct factor analysis, reliability analysis, and multiple regression analysis. The results of this research are as follows. First, interaction/playfulness, information, reliability, and convenience of access were extracted as the characteristics of fashion brands SNS marketing. Second, all SNS factors had significant relation on perceived usefulness. But only interaction/playfulness and convenience of access showed significant relation on perceived ease of use. Third, perceived usefulness and perceived ease of use affected continuous use intention. Forth, continuous use intention had significant relation on brand attitude and showed direct and indirect significant relation to purchase intention.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2221-2228
• /
• 2021

One-dimensional oxygen transport relation is indispensable to study the oxygen distribution in the LBE-cooled system with an oxygen control device. In this paper, a numerical research is carried out to study the oxygen transport characteristics in a gas-phase oxygen control device, including the static case and dynamic case. The model of static oxygen control is based on the two-phase VOF model and the results agree well with the theoretical expectation. The model of dynamic oxygen control is simplified and the gas-liquid interface is treated as a free surface boundary with a constant oxygen concentration. The influences of the inlet and interface oxygen concentration, mass flow rate, temperature, and the inlet pipe location on the mass transfer characteristics are discussed. Based on the results, an oxygen mass transport relation considering the temperature dependence and velocity dependence separately is obtained. The relation can be used in a one-dimensional system analysis code to predict the oxygen provided by the oxygen control device, which is an important part of the integral oxygen mass transfer models.