• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.219-230
• /
• 2011

The nuclear fuel cycle (NFC) analysis is a study to set a NFC policy and to promote systematic researches by analyzing technologies and deriving requirements at each stage of a fuel cycle. System analysis techniques are utilized for comparative analysis and assessment of options on a considered system. In case that NFC is taken into consideration various methods of the system analysis techniques could be applied depending on the range of an interest. This study presented NFC analysis strategies for the development of a domestic advanced NFC and analysis techniques applicable to different phases of the analysis. Strategically, NFC analysis necessitates the linkage with technology analyses, domestic and international interests, and a national energy program. In this respect, a trade-off study is readily applicable since it includes various aspects on NFC as metrics and then analyzes the considered NFC options according to the derived metrics. In this study, the trade-off study was identified as a method for NFC analysis with the derived strategies and it was expected to be used for development of an advanced NFC. A technology readiness level (TRL) method and NFC simulation codes could be utilized to obtain the required metrics and data for assessment in the trade-off study. The methodologies would guide a direction of technology development by comparing and assessing technological, economical, environmental, and other aspects on the alternatives. Consequently, they would contribute for systematic development and deployment of an appropriate advanced NFC.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.9
• /
• pp.75-91
• /
• 2022

This study assesses the Internet banking adoption tendency by existing bank customers of Bangladesh. Currently, almost all the leading banks in the country have implemented Internet banking platforms. However, the active user count remains relatively low and there hasn't been any conclusive research on the drivers and inhibitors of Internet banking. This study evaluates the reasons and quantitatively establishes the factors leading to the adoption and usage continuance of internet banking by existing bank customers. Responses from 460 bank account holders were collected via online questionnaires using a purposive sampling approach, and a core conceptual framework based on Technology Acceptance Model (TAM) and Technology Readiness Index (TRI) was used. The study concluded that internet banking adoption is significantly impacted by the ease of use, customer service, and technology familiarity. Similarly, customer satisfaction is affected by the perceived value and the perceived risk. Through regression analysis, it was found that usage continuance is 89% explained by adoption and customer satisfaction. Multi-group moderation showed significant impact by groups divided based on usage frequency, income level, and age. Perceived risk weakened the impact of perceived value and technology familiarity on usage adoption. Additionally, perceived risk reduced the impact of consumer satisfaction and usage continuance.

• Journal of Biomedical Engineering Research
• /
• v.38 no.3
• /
• pp.89-94
• /
• 2017

In order to improve national competitiveness through technological research and development, the government puts in R&D budget every year and manages to improve the R&D results. Accordingly, various R&D project management methods have applied for successful advancement of technology and product. TRL is a measurement system developed by NASA to assess the maturity of technology since the 1970s. To apply medical device, the characteristics such as regulation, clinical trials are considered as a significant influence. In this study, we would like to derive PMI(performance measures index) for medical device R&D projects by using TRL and stage-gate model. As a result of this study, it is possible to use the PMI for decision making and evaluation in the R&D projects and believed that the objectivity can be ensured by the approval or certification of regulatory authority.

• New & Renewable Energy
• /
• v.19 no.1
• /
• pp.41-52
• /
• 2023

Various carbon upcycling technologies have been proposed and are under development to achieve Korea's carbon neutrality target. Many chemical reactions are under development through various chemical reaction pathways, and different technological maturity levels are shown for each country and company. In this situation, it is essential to establish investment decisions such as research funds and human resources allocation through technological and economic analysis for close commercialization technologies and basic technologies with low technology readiness levels (TRL). Therefore, in this study, the technology development priority for developing carbon upcycling items was selected according to the domestic Carbon Capture & Utilization (CCU) technology roadmap using the stakeholder selection tool released by EU CarbonNext. As a result of the analysis, the TRL level of Korea's major carbon upcycling technologies was analyzed to be lower than that of other carbon resource technologies, and it was considered desirable to invest in mineral carbonization technologies among various candidate technologies.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.114-120
• /
• 2008

While ubiquitous healthcare (u-health) services were expected to propagate along with conventional healthcare services, recent progress indicated rather limited market acceptance. In this paper, we investigated the fundamental causes of why the consumer acceptance level of u-health services has been low. We draw upon innovation adoption theories to analyze the consumer readiness of the typical u-health services. The comparative analysis between innovative u-health services and conventional services was performed using analytic hierarchy process (AHP). Subsequently, policy and business implications including technological breakthrough insights were discussed based on the customer perspective comparative adoption analysis. The propositions captured through this study provide useful insight to further studies on u-health services.

• Ocean Systems Engineering
• /
• v.13 no.1
• /
• pp.21-41
• /
• 2023

Decarbonization and energy transition can be considered as a main concern even for the oil industry. One of the initiatives to reduce emissions under studies considers the use of renewable energy as a complimentary supply of electric energy of the production platforms. Wind energy has a higher TRL (Technology Readiness Level) than other types of energy converters and has been considered in these studies. However, other types of renewable energy have potential to be used and hybrid concepts considering wind platforms can help to push the technological development of other types of energy converters and improve their efficiency. In this article, a preliminary hydrodynamic assessment of a new concept of hybrid wind and wave energy conversion platform was performed, in order to evaluate the potential of wave power extraction. A multiple OWCs (Oscillating Water Column) WEC (Wave Energy Converter) design was adopted for the analysis and some simplifications were adopted to permit using a frequency domain approach to evaluate the mean wave power estimation for the location. Other strategies were used in the OWC design to create resonance in the sea energy range to try to maximize the potential power to be extracted, with good results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.954-966
• /
• 2021

With regards to the marine spatial plannings of the world, the spaces are being managed through the integration of various uses and the establishment of systems and laws in the perspective of the utilization of spaces. In the perspective of policy establishment, the policy readiness level is applied to analyze the trends in the studies on South Korea's marine spatial plans. The scope of the study included analyzing marine spatial plan as a keyword in articles published over the period from 2010 to 2020. The methods of analysis included the analyses of the frequency of word appearance, word clouds, and appearance intensity, which were used to identify key issues. Five keywords that were related to the topics were identified, and were again used to identify the key themes. The core themes were changing in all phases, such as the principles development phase, institutionalization phase, policy verification phase. For future benefit, this requires more research in South Korean public organizations and universities.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.103-110
• /
• 2023

In this study, clustering analysis was performed to find out the influence of the maturity level of Industry 4.0 of SMEs in Korea, index factors of clustering, and major factors on the self-evaluation of companies. When 80 domestic SMEs were classified into 4 categories, it was found that there was a significant positive correlation between process, technology and organization. In addition, the majority of the 80 companies tested according to the maturity model appear to be immature or partially mature, and many improvements and re-evaluation of innovation strategies related to Industry 4.0 are needed. Finally, it was concluded that the Singapore Smart Industry Readiness Index is suitable for conducting self-assessment in domestic SMEs. These conclusions can serve as useful maturity and grouping guidelines for practitioners and researchers.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.696-702
• /
• 2021

Informatization of early childhood education in the EU occurs in the context of the use of ICT as a means of sharing experiences, practices in the education and training of preschool children, communication, both at the national level and locally - within educational institutions, as a means of document management, search, data processing and information for the management of early childhood educational institutions, and planning activities for these institutions. This article aims to identify the features of the informatization of early childhood education in EU countries. Results. The countries of the EU have different levels of workload on the staff of early childhood education institutions, which is caused by different numbers of preschoolers and workforce. The greatest load on the staff in France due to a large number of preschoolers, which, despite the reduction, remained the highest among all the countries. By comparison, Poland's significant workload is mitigated by the size of its workforce. With almost equal numbers of staff in Poland and Germany, the countries differ significantly in the number of preschoolers. The countries also have different funding mechanisms for early childhood education, which determines the potential for digitalization. In France, total spending on early childhood education has grown the least (by 11 % between 2012 and 2018), in Poland by 51 %, in the Czech Republic by 44 %, and in Germany by 49%. In France, 100 % is funded by the government, in Poland 78 % is funded by the government, in the Czech Republic and Germany 87 % and 85 % respectively is funded by the government. The results of the survey of teachers' training in the use of ICTs and the level of specialists' readiness to use them in their studies indicate a mismatch between education and the practice of using technology. At the same time, given the high level of professional training of teachers in the use of technology in education, a low level of practice of ICT use in teaching preschool children was revealed. Teachers require professional development of ICT skills.

• Advances in aircraft and spacecraft science
• /
• v.6 no.5
• /
• pp.427-442
• /
• 2019

Small satellites represent an emerging opportunity to realize a wide range of space missions at lower cost and faster delivery, compared to traditional spacecraft. However, small platforms, such as CubeSats, shall increase their actual capabilities. Miniaturized electric propulsion systems can provide the satellite with the key capability of moving in space. The level of readiness of miniaturized electric propulsion systems is low although many concepts have been developed. The present research intends to build a flexible test platform for the assessment of selected small propulsion systems in relevant environment at laboratory level. Main goal of the research is to analyze the mechanical, electrical, magnetic, and chemical interactions of propulsion systems with the modern CubeSat-technology and to assess the performance of the integrated platform. The test platform is a 6U CubeSat hosting electric propulsion systems, providing mechanical, electrical and data interfaces, able to handle a variety of electric propulsion systems, thanks to the ability to regulate and distribute electric power, to exchange data according to several protocols, and to provide different mechanical layouts. The test platform is ready to start the first verification campaign. The paper describes the detailed design of the platform and the main results of the AIV activities.