• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1137-1146
• /
• 2000

This study was carried out to establish an optimum number of phase feeding regimen which enable to reduce nutrients excretion without affecting growth performance and to investigate the effects of different feeding regimens on growth performance, nutrients excretion and carcass characteristics in finishing pigs. A total of 120 finishing pigs (an average initial body weight of 54.3 kg) were assigned to the feeding trial and 12 pigs were assigned to the metabolic trial. Treatments included one phase (54 to 104 kg), two phase (54 to 80 and 80 to 104 kg), three phase (54 to 70, 70 to 90 and 90 to 104 kg) and four phase (54 to 65, 65 to 80, 80 to 95, 95 to 104 kg) feeding regimens. Experimental diets were formulated to contain 16% crude protein for one phase feeding regimen, 16% and 12% crude protein for two phase feeding regimen, 16%, 14% and 12% crude protein for three phase feeding regimen, and 16%, 14.7%, 13.4% and 12% crude protein for four phase feeding regimen, respectively. Although there were no significant differences in any criteria measured during the entire experimental period, pigs reared in three phase feeding regimen grew slightly faster than those reared in other feeding regimens and showed a tendency to increase ADFI during the whole experimental period. The metabolic trial indicated that there were no significant differences in DM (dry matter), CP (crude protein) and P (phosphorus) digestibilities. However, fecal nutrient excretion except P was significantly influenced by feeding regimens. DM excretion of one phase feeding group was significantly higher than that of three phase feeding group and daily fecal N (nitrogen) excretion of one phase feeding group was higher than that of other phase feeding groups (p<0.05). Three and four phase feeding regimens resulted in 12% lower fecal N and DM excretion than one phase feeding regimen. Blood urea concentrations were lower for pigs reared in two, three and four phase feeding regimens than for those reared in one phase feeding regimen (p<0.05). Three phase feeding regimen for the finishing period showed better carcass grade than one phase feeding regimen, though the difference was not significant. The tenth rib fat thickness of pigs fed on four phase feeding regimen was reduced most and there was a trend that backfat thickness decreased as the number of phases increased. Feed cost per kg weight gain was significantly low in four phase feeding group than one phase feeding group (p<0.05). In summary, it seemed that producers generally oversupply the expensive nutrients for the finishing pigs. High nutrient diets do not always guarantee high growth rate of pigs and cause more unwanted nutrient excretion. It rather seems that meeting nutrient requirements for the each growth phase is more important for the reduction of pollutants and economical pork production.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.981-994
• /
• 2017

Purpose: In this study, the reliability growth management procedures for armed vehicle is suggested and an illustrative case study of launcher system is given. Methods: Crow-AMSAA model is adopted to manage reliability growth of armed vehicle using failure data acquired from development test phase to field operation phase. Between the development test phase and the production phase, the suggested reliability growth procedures for armed vehicle entails accelerated life test of the selected module whose design is changed to improve its reliability for assuring the target system reliability. And it can be verified through estimating the system reliability based on the failure data of field operation phase. Results: It is shown that the proposed reliability growth management procedures are effective for armed vehicle based on the case study of launcher system. After estimating the reliability of launcher system at every development test, some items are selected to change their designs for improving reliability. Accelerated life test is performed to prove the reliability improvement and finally it is verified through the field operation. Conclusion: The reliability growth management procedures for armed vehicle is suggested and the case study of launcher system shows it can be effective for managing the reliability growth of the armed vehicle.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.652-658
• /
• 2011

The growth kinetics of Streptomyces noursei NRRL 5126 was investigated under different aeration and agitation combinations in a 5.0 l stirred tank fermenter. Poly-${\varepsilon}$-lysine biosynthesis, cell mass formation, and glycerol utilization rates were affected markedly by both aeration and agitation. An agitation speed of 300 rpm and aeration rate at 2.0 vvm supported better yields of 1,622.81 mg/l with highest specific productivity of 15 mg/l.h. Fermentation kinetics performed under different aeration and agitation conditions showed poly- ${\varepsilon}$-lysine fermentation to be a growth-associated production. A constant DO at 40% in the growth phase and 20% in the production phase increased the poly-${\varepsilon}$-lysine yield as well as cell mass to their maximum values of 1,992.35 mg/l and 20.73 g/l, respectively. The oxygen transfer rate (OTR), oxygen utilization rate (OUR), and specific oxygen uptake rates ($qO_2$) in the fermentation broth increased in the growth phase and remained unchanged in the stationary phase.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1024-1037
• /
• 2021

Mining high utility itemsets (HUIs) from transaction databases considers such factors as the unit profit and quantity of purchased items. Two-phase tree-based algorithms transform a database into compressed tree structures and generate candidate patterns through a recursive pattern-growth procedure. This procedure requires a lot of memory and time to construct conditional pattern trees. To address this issue, this study employs two compressed tree structures, namely, Utility Count Tree and String Utility Tree, to enumerate valid patterns and thus promote fast utility computation. Furthermore, the study presents an algorithm called single-phase utility computation (SPUC) that leverages these two tree structures to mine HUIs in a single phase by incorporating novel pruning strategies. Experiments conducted on both real and synthetic datasets demonstrate the superior performance of SPUC compared with IHUP, UP-Growth, and UP-Growth+algorithms.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.382-385
• /
• 2000

A mathematical model was developed, based on the time dependent changes of the specific growth rate, for prediction of the typical microbial cell growth in batch cultures. This model could predict both the lag growth phase and the stationary growth phase of batch cultures, and it was tested with the batch growth of Trichoderma reesei and Lactobacillus delbrueckii.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• BMB Reports
• /
• v.29 no.3
• /
• pp.221-224
• /
• 1996

To examine the growth-phase dependent control of Escherichia coli rnpB gene we used a combination of Northern analysis for RNA determination and Southern analysis for plasmid DNA determination. The relative amounts of metabolically unstable transcript derived from the internally deleted rnpB gene harbored on a multicopy plasmid as well as the relative plasmid contents were measured by Northern analysis and Southern analysis, respectively, of total nucleic acids from E coli cells containing the plasmid. The relative transcription activity of the rnB was represented by a ratio of the relative amount of the transcript to that of the plasmid DNA during bacterial growth. The rnpB transcription increased rapidly with time during exponential growth, but started to decrease before the transition period of an exponential growing cell culture into the stationary phase. Although the expression pattern was similar to the changes of ${\beta}-galactosidase$ activity expressed from the lysogenic strain carrying the chromosomal rnpB-lacZ fusion which were shown in a previous work, the present data appears to represent a more actual growth-phase control of the rnpB transcription than the previous data by the ${\beta}-galactosidase$ assay. In addition the present method described for a direct analysis of both RNA and plasmid DNA provides a rapid and efficient method that can applied to an examination of transcription control by using a multicopy plasmid.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.466-467
• /
• 2006

The anatase particle was facetted at the free surface and a neck formation between the anatase particles prior to the phase transformation occured. This resulted in the severe lattice distortion at the region of the interface near the neck and this can act as the nucleation sites for the phase transformation. The grain growth of rutile particles after the phase transformation grew very fast by the sweeping phenomena of grain boundary. Therfore, It leaded to the microstructure without the rutile phase located in anatase particle.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.891-892
• /
• 2006

To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.61-69
• /
• 2004

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the effects of alcohol on phase separation of chlorinated poly(vinyl chloride) (CPVC)/tetrahydrofuran (THF)/alcohol (9/61/30 wt%) solution during water vapor induced phase separation. A typical scattering pattern of nucleation & growth (NG) was observed for all casting solutions of CPVC/THF/alcohol. In the case of the phase separation of CPVC dope solution containing 30 wt% ethanol or n-propanol, the demixing with NG was observed to be heterogeneous. Meanwhile, the phase separation of CPVC dope solution with 30 wt% n-butanol was found to be predominantly homogeneous NG. Although the different phase separation behavior of NG was observed with types of alcohol additives, the resultant surface morphology had no remarkable differences. That is, even though the NG process by water vapor is either homogeneous or heterogeneous, this difference does not play a main role on the final surface morphology. However, it was estimated from the result of hydraulic flux that the phase separation by homogeneous NG provided the membrane geometry with lower resistance in comparison with that by heterogeneous one.