• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1169-1181
• /
• 2005

Experimental and numerical studies on the unsteady wake field behind a square cylinder near a wall were conducted to find out how the vortex shedding mechanism is correlated with gap flow. The computations were performed by solving unsteady 2-D Incompressible Reynolds Averaged Navier-Stokes equations with a newly developed ${\epsilon}-SST$ turbulence model for more accurate prediction of large separated flows. Through spectral analysis and the smoke wire flow visualization, it was discovered that velocity profiles in a gap region have strong influences on the formation of vortex shedding behind a square cylinder near a wall. From these results, Strouhal number distributions could be found, where the transition region of the Strouhal number was at $G/D=0.5{\sim}0.7$ above the critical gap height. The primary and minor shedding frequencies measured in this region were affected by the interaction between the upper and the lower separated shear layer, and minor shedding frequency was due to the separation bubble on the wall. It was also observed that the position (y/G) and the magnitude of maximum average velocity $(u/u_{\infty})$ in the gap region affect the regular vortex shedding as the gap height increases.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.363-367
• /
• 2016

For the industrial application of electropolishing process, we investigated electropolishing characteristics of stainless steel through increasing the specimen size or electrode gap. In this study, we performed a set of experiment with the specimen size of $10cm{\times}10cm$ and the electrode gap of 1 cm or more. In the view of the electropolishing process, the electrolyte temperature and the polishing time were most important factors compared with the current density and the electrode gap. Especially, the electrolyte temperature most importantly affected surface roughness and current efficiency on electropolishing characteristics. For the industrial application of electropolishing process, it should be considered for important factors such as electrolyte temperature, polishing time, current density and electrode gap, etc.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.344-357
• /
• 1995

핵연료 소결체와 피복관 사이의 간극 크기에 크게 좌우되는 간극 열전도도는 연료봉내 초기 저장에너지 양에 중요한 영향을 끼친다. 정상상태 계산용 ELESTRES 코드에서 사용 중인 수정된 Ross-Stoute 의 간극 열전도도 모델은 단순한 열적 변형 모델에 기초한다. 최근의 실험에서 핵연료 소결체가 연소됨에 따라서 균열, 소결체 재배열 등이 발생되고, 피복관 내부의 편심에 위치하게 된다는 것이 알려졌다. 본 논문에서는, 최근에 제안된 편심형 간극 모델과 소결체 재배열형 간극 모델 등이 기술되었고, 실험 조건과 중수로 핵연료봉의 운전조건 하에서의 소결체와 피복관 사이의 간극 열전도도를 계산하는데 이용되었다. 실험 치와 계산치가 잘 일치됨으로써, 수정된 Ross-Stoute 모델이 ELESTRES 코드 내에서 사용된 열전달 관련 가정들과 잘 부합됨을 보여 주었다. 출력 경계곡선을 따라서 수정된 Ross-Stoute 모델로 계산된 간극내 열전달과 핵연료 표면 온도 등이 편심형 간극 모델과 소결체 재배열형 간극모델에 의한 예측치보다 보수적이었다.

• 기술표준
• /
• 통권44호
• /
• pp.69-72
• /
• 2005

• 과학과기술
• /
• 10호통권449호
• /
• pp.62-65
• /
• 2006

• 과학기술정책
• /
• 제4권5호통권62호
• /
• pp.47-56
• /
• 1994

• 과학기술정책
• /
• 제4권5호통권62호
• /
• pp.57-70
• /
• 1994

• 과학과기술
• /
• 제3호통권466호
• /
• pp.66-67
• /
• 2008

• 기술표준
• /
• 통권39호
• /
• pp.93-96
• /
• 2005

• 기술표준
• /
• 통권7호
• /
• pp.14-17
• /
• 2002