• Korean Journal of Plant Resources
• /
• v.29 no.4
• /
• pp.495-503
• /
• 2016

In the present study, we investigated the plant growth characteristics and biological activity of four asparagus cultivars grown using two cultural methods and tested the possibility of domestic open field. The number of shoots, buds, roots, shoot and root fresh and dry weights, and total dry weight of the four asparagus cultivars grown in a plastic house were higher than those of the same cultivars grown in an open field. Of the cultivars grown in the open field, Jersey Giant had greater shoot number than the other cultivars. In plastic house cultivation, the number of buds in Jersey Supreme was greater than the other cultivars. The total flavonoid content of the Jersey Giant was greater than the other cultivars, but cultural method was unaffected. The total polyphenol contents in asparagus cultivars grown in the plastic house were higher than those of cultivars grown in the open field. The total polyphenol content of the Jersey Giant grown the plastic house was significantly higher than those of other cultivars. Antioxidant activity such as catalase (CAT) and peroxidase (POX) did not differ significantly with cultural methods and among the cultivars. Ascorbate peroxidase (APX) activity of asparagus cultivars grown in the open field was higher than that of cultivars grown in the greenhouse; the highest APX activity was detected in UC157. Thus, greenhouse cultivation is expected to improve plant growth characteristics and biological activities of asparagus cultivars; each cultural method should be considered when selecting a suitable cultivar for high yield and high bioactive compound content.

• Analytical Science and Technology
• /
• v.33 no.3
• /
• pp.151-158
• /
• 2020

Alcohol, which can easily be obtained in the same way as ordinary beverages, is harmful enough to cause death due to excessive drinking and chronic alcohol intake, so it is important to maintain a proper amount of drinking and healthy drinking habits. In addition, the incidence of behavioral disturbances and impaired judgments that can be caused by chronic alcohol drinking of more than adequate amounts of alcohol is also significant. Accordingly it is very useful for forensic science to check whether the person involved is drunken or is alcoholism state in various accidents. Currently, in Korea, alcohol consumption is determined by detecting the level of alcohol or alcohol metabolism 'ethyl glucuronide (EtG)' in blood or urine samples. However, analysis of alcohol or EtG in blood or urine can only provide information about the current state of alcohol consumption because of a narrow window of detection time. Therefore, it is important to analyze the EtG as a long-term direct alcohol metabolite bio-marker in human hair and to investigate relationship between alcohol consumption and EtG concentration for the evaluation of chronic ethanol consumption. In this study, we established an analytical method for the detection of EtG in Korean hair efficiently and validated selectivity, linearity, limits of detection (LOD), limits of quantification (LOQ), matrix effect, recovery, process efficiency, accuracy and precision using liquid chromatography tandem mass spectrometry (LC-MS/MS). In addition, the assay performance was evaluated in Korean social drinker's hair and the postmortem hair of a chronic alcoholism. The results of this study can be useful in monitoring the alcohol abuse of Korean in clinical cases and legal procedures related to custody and provide a useful tool to evaluate postmortem diagnosis of alcoholic ketoacidosis in forensics.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.45-52
• /
• 2015

We obtained the following results from investigation on vegetation damage from 5 to 6 August, 2013, about one year after an accident that hydrofluoric acid leaked from a chemical maker, Hube Globe in Gumi. Pinus densiflora and Pinus strobus showed very severe damage. Ginko biloba, Quercus acutissima, Pinus rigida, Salix glandulosa, Hibiscus syriacus, and Lagerstroemia indica showed severe damage. Quercus variabilis, Lespedeza cyrtobotrya, and Miscanthus sinensis showed moderate damage. Quercus aliena, Smilax china, Arundidinella hirta, Ailanthus altissima, Robinia pseudoacacia, and Paulowinia coreana showed slight damage. We did not find any plants without leaf damage around there. This result means that fluoride damage still persists in this area as was known that fluoride remains for a long time in air, soil and water and exerts negative effects at all levels of an ecosystem. In addition, fluoride content contained in plant leaf depended on the distance from a fertilizer producing factory and vegetation damage tended to proportionate to the concentration in the Yeocheon industrial complex. In these respects, a measure for removal or detoxification of the remaining fluoride is urgently required around the hydrofluoric acid leak spot. Fertilizing of dolomite containing Ca and Mg, which can trap fluoride, was prepared as one of the restoration plans. In addition, phosphate fertilizing was added in order to enhance soil ameliorating effects. Furthermore, we recommend the introduction of tolerant plants as the second measure to mitigate fluoride damage. As the tolerant plants to make a new forest by replacing trees died due to hydrofluoric acid gas damage, we recommended Q. aliena and S. china, A. hirta, etc. were recommended as plant species to add mantle vegetation to the forest margin to ensure stable interior environment of the forest.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1086-1091
• /
• 1999

$K^+-{\beta}/{\beta}"-Al_2O_3$ in the ternary system $K_2O-MgO-Al_2O_3$ was directly synthesized by solid state reaction. The phase formation and phase relation were carefully investigated in relation to starting composition, calcining temperature and time, and dispersion medium. The optimal synthetic condition was also examined for the formation of ${\beta}"-Al_2O_3$ phase with a maximum fraction. As a composition range, the mole ratio of $K_2O$ to $Al_2O_3$ was changed from 1:5 to 1:6.2 and the amount of MgO used as a stabilizer was varied from 4.2 wt % to 6.3 wt %. The calcining temperature was selected between $1000^{\circ}C$ and $1500^{\circ}C$. At $1000^{\circ}C$, the ${\beta}/{\beta}"-Al_2O_3$ phases began to form resulted from the combining of ${\alpha}-Al_2O_3$ and $KAlO_2$ and increased with temperature rising. All of ${\alpha}-Al_2O_3$ phase disappeared to be homogenized to the ${\beta}/{\beta}"-Al_2O_3$ phase at $1200^{\circ}C$. Near the temperature at $1300^{\circ}C$, the fraction of ${\beta}"-Al_2O_3$ phase showed a maximum value with the composition of $K_{1.67}Mg_{0.67}Al_{10.33}O_{17}$. At temperatures above $1300^{\circ}C$, the fraction of ${\beta}"-Al_2O_3$ phase decreased gradually owing to $K_2O$ loss caused by a high potassium vapor pressure, and the appropriate calcining time was about 5 hours. Acetone was more effective than distilled water as a dispersion medium for milling and mixing.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.453-459
• /
• 2015

Split-flow thin cell fractionation (SPLITT fractionation, SF) is a particle separation technique that allows continuous (and thus a preparative scale) separation into two subpopulations based on the particle size or the density. In SF, there are two basic performance parameters. One is the throughput (TP), which was defined as the amount of sample that can be processed in a unit time period. Another is the fractionation efficiency (FE), which was defined as the number % of particles that have the size predicted by theory. Full-feed depletion mode (FFD-SF) have only one inlet for the sample feed, and the channel is equipped with a flow stream splitter only at the outlet in SF mode. In conventional FFD-mode, it was difficult to extend channel due to splitter in channel. So, we use large scale splitter-less FFD-SF to increase TP from increase channel scale. In this study, a FFD-SF channel was developed for a large-scale fractionation, which has no flow stream splitters (‘splitter less’), and then was tested for optimum TP and FE by varying the sample concentration and the flow rates at the inlet and outlet of the channel. Polyurethane (PU) latex beads having two different size distribution (about 3~7 µm, and about 2~30 µm) were used for the test. The sample concentration was varied from 0.2 to 0.8% (wt/vol). The channel flow rate was varied from 70, 100, 120 and 160 mL/min. The fractionated particles were monitored by optical microscopy (OM). The sample recovery was determined by collecting the particles on a 0.1 µm membrane filter. Accumulation of relatively large micron sized particles in channel could be prevented by feeding carrier liquid. It was found that, in order to achieve effective TP, the concentration of sample should be at higher than 0.4%.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.141-154
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.61-72
• /
• 2007

Having started with "Space War", the first game produced by MIT in the 1960's, the gaming industry expanded rapidly and grew to a large size over a short period of time: the brand new games being launched on the market are found to contain many different elements making up a single content in that it is often called the 'the most comprehensive ultimate fruits' of the design technologies. This also translates into a large increase in the number of things which need to be considered in developing games, complicating the plans on the financial budget, the work force, and the time to be committed. Therefore, an approach for analyzing the elements which make up a game, computing the importance of each of them, and assessing those games to be developed in the future, is the key to a successful development of games. Many decision-making activities are often required under such a planning process. The decision-making task involves many difficulties which are outlined as follows: the multi-factor problem; the uncertainty problem impeding the elements from being "quantified" the complex multi-purpose problem for which the outcome aims confusion among decision-makers and the problem with determining the priority order of multi-stages leading to the decision-making process. In this study we plan to suggest AHP (Analytic Hierarchy Process) so that these problems can be worked out comprehensively, and logical and rational alternative plan can be proposed through the quantification of the "uncertain" data. The analysis was conducted by taking FPS (First Person Shooting) which is currently dominating the gaming industry, as subjects for this study. The most important consideration in conducting AHP analysis is to accurately group the elements of the subjects to be analyzed objectively, and arrange them hierarchically, and to analyze the importance through pair-wise comparison between the elements. The study is composed of 2 parts of analyzing these elements and computing the importance between them, and choosing an alternative plan. Among these this paper is particularly focused on the Delphi technique-based objective element analyzing and hierarchy of the FPS games.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.105-118
• /
• 2005

Housing environment for human beings has been diversified and more convenient due to the development of high technology and civilization brought by industrialization in the 20th century. In the 21st century, how to overcome the ecological limit of biased development-centered advancement, that is, how to preserve and hand over a clean and healthy 'sustainable environment' to our next generations has been one of the most-talked about issues. Environmental symbiosis means a wider range of environmental harmony from micro-dimensional perspective to macro one. The three goals of a environmentally friendly house are to preserve global environment, to harmonize with the environment around, and to offer a healthy and comfortable living environment. From the point of view of environmental symbiosis, houses should be designed to save energy and natural resources for preservation of global environment, to collect such natural energy resources as solar heat and wind force, to recycle waste water, and recycle and reduce the amount of the waste matter. Now, the environmentally-friendly house became a new social mission that is difficult to not only challenge but also realize without conversion to a new paradigm, ecologism.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.19-25
• /
• 2005

This study was performed to investigate the optimum density for the intensive mass production of cyclopoid copepod, Paracyclopina nana in terms of nauplii and adults production. Effect of three development stages on the fecundity of adult female for nauplii production, survival rate of P. nana nauplii with different initial nauplii culture densities for adults production and cannibalistic feeding behavior of P. nana was examined, respectively. The fecundity of adult female by different female, copepodite ana nauplii density in 2 ml water volume decreased with the density of adult female, but was not affected by the density of either copepodite or nauplii. The average daily nauplii production for a adult female in 8 L water volume was $2.3{\times}10^5$ individuals with the incubation density of 7 adult females/ml, and this average value was significantly higher than those values of 0.6 to $1.7\times10^5$ individuals with the incubation density of 1,3,5, 10 adult females/ml (P<0.05). Survival rate of P. nana nauplil with different initial nauplii culture densities in 5 L vessels for 15 days were 32.7, 30.7, 28.9 and $23.0\%$ with the culture density of 50, 100, 150 and 200 inds./ml, respectively, but these were significantly higher than those of values 19.7 and $18.4\%$ with the culture density of 250 and 300 inds./ml (P<0.05). Cannibalistic behavior of P. nana adults on their offspring was observed, but the behavior decreased when phytoplankton was supplemented though there was no statistical difference (P>0.05). These results may indicate that P. nana is adaptable to the hatchery conditions and this species is cultured at the high densities. Optimum culture density for nauplii and adults production of P. nana were 7 adult females/ml and 200 nauplii/ml, respectively.

• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.173-181
• /
• 2009

These studies were investigated for effect of concentration of sodium chloride on occurrence and growth of fruitbody in oyster mushroom, Pleurotus ostreatus. When the mycelia were inoculated and cultured on the PDA plate added with the different concentrations of sodium chloride, the growth of them were not affected at the concentration of 0.5%, started to decrease at 1.0% as compared with the PDA plate without sodium chloride, and they did not grow at 5.0%. When tested at the column filled with sawdust, the tendency was similar, but the decreasing rate of mycelial growth was gentle. In sawdust bottle cultivation sprinkled with the different concentration of sodium chloride solution at the different stage, the productivity and quality of fruitbody started to decrease at 3.0% of the solution and the yield at the treatment of 10.0% solution was only 47% of that in non-treated bottles. Treated at the different stages of mushroom development, treatment just after mushroom sprout did not show any different from that just after scraping spawn from the complete grown bottles. The sprinkle treatment at this stage looked better than that of the soaking with the solution before mushroom sprout. The yield at this treatment with 10% solution showed little damage with that of 90% of non-treated bottle. Sprinkle treatment during mushroom growth stage did not affect and showed almost same to non-treated bottle except the treatment with 10.0% solution. The treatment of this stage showed better results of growing characters than the treatment after and before mushroom sprouting even 10% solution. Morphological characteristics of oyster mushroom do not distinguish to treatment of different stage and concentration of sodium chloride solution. The analyzing data of quality on underwater usually used for oyster mushroom in Inchon, Yeongjong and Kanghwa area showed over-concentration to the standard for edible water and agricultural water. But it was not confirmed whether this water quality could affect to mushroom cultivation.