• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.66-71
• /
• 2019

In shape from focus (SFF) methods, the quality of image focus volume plays a vital role in the quality of 3D shape reconstruction. Traditionally, a linear 2D filter is applied to each slice of the image focus volume to rectify the noisy focus measurements. However, this approach is problematic because it also modifies the accurate focus measurements that should ideally remain intact. Therefore, in this paper, we propose to enhance the focus volume adaptively by applying 3-dimensional weighted least squares (3D-WLS) based regularization. We estimate regularization weights from the guidance volume extracted from the image sequences. To solve 3D-WLS optimization problem efficiently, we apply a technique to solve a series of 1D linear sub-problems. Experiments conducted on synthetic and real image sequences demonstrate that the proposed method effectively enhances the image focus volume, ultimately improving the quality of reconstructed shape.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.7-11
• /
• 2013

This paper presents a study on the design for contamination preventation system of solar battery. The system of contamination preventation has an wind amplifier. Wind amplifier is conceptually designed by using TRIZ. The surface of solar battery is covered with dust during accumulate the energy. The dust cause reduce power of photovoltaic module and efficiency drop of photovoltaic system. Reflect and absorb of incident ray are caused by the dust on surface of solar battery. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The wind amplifier which has structure such as funnel shape. The incident wind in the wide hole is amplified by the gate become narrow. The system of contamination preventation with wind amplifier which mounted on the side of the solar battery surface reduces the reflect and absorb and improve the efficiency of photovoltaic system.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.343-352
• /
• 2016

Purpose: The intention of the study is to reveal the factors that influence the safety-behavior and safety-accident of the students of dental laboratory science. We intend to use the study as a basic data of searching effective ways to heighten the safety-behavior of clinical training and to prevent safety-accident. Methods: The survey was conducted on dental technology students. The collected data was analyzed by the statistical program SPSS 21.0. The results were analyzed by reliability, frequency, t-test, correlation, multiple regression. To test for significance on each item, p<0.05 has been decided as a standard. Results: The results of the study showed that the safety of the students was influenced by the school year, the leader of clinical training, clinical training environment and the experience of safety education. The safety-accident turned out to be influenced by the school year of the student and the safety behavior. Conclusion: Active leader of clinical training, clinical training environment that enables the safety-behavior, and the offering of the systematic safety education were the most important factors to heighten the safety behavior of the students and prevent the safety-accident. These factors were expected to not only induce the safety-behavior but also prevent the safety-accident as well.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.317-325
• /
• 2020

Accurate estimation of spatial frequencies and phases for illumination patterns are essential to reconstructing super-resolution images in structured illumination microscopy (SIM). In this manuscript, we propose the improved component cross-correlation (ICC) algorithm, which is based on optimization of the cross-correlation values of the overlapping information between various spectral components. Compared to other algorithms for spatial-frequency and phase determination, the results calculated by the ICC algorithm are more accurate when the modulation depths of the illumination patterns are low. Moreover, the ICC algorithm is able to calculate the spatial frequencies and phases simultaneously. Simulation results indicate that even if the modulation depth is lower than 0.1, the ICC algorithm still estimates the parameters precisely; the images reconstructed by the ICC algorithm are much clearer than those reconstructed by other algorithms. In experiments, our home-built SIM system was used to image bovine pulmonary artery endothelial (BPAE) cells. Drawing support from the ICC algorithm, super-resolution images were reconstructed without artifacts.

• Journal of Practical Engineering Education
• /
• v.11 no.2
• /
• pp.283-289
• /
• 2019

Recently, product mobility, data compatibility and communication connectivity have become very important to the control system, depending on the application of smart manufacturing. Accordingly, embedded systems are essential in all industries including home appliances, telecommunication, and national defense. Therefore, the demand for embedded system development personnel is increasing further, and education and training programs are needed to combine the practical skills of industrial sites, including programming skills and hardware. Currently, embedded system education offers a variety of education centered on Aduino, but this is mostly for beginners and is not sufficient for majors. In addition, while various prototype studies related to embedded systems are active, the training and training programs for working-level human resources needed at industrial sites are very scarce. Therefore, in order to foster the working personnel of the embedded system for the application of smart manufacturing, this paper selected the capability unit through in-depth interviews and survey analysis of 10 experts based on NCS, and developed education and training programs and contents.

• Journal of People, Plants, and Environment
• /
• v.21 no.6
• /
• pp.501-514
• /
• 2018

This study aimed to develop a program that can be linked to gardening education activities in elementary students' curriculums and creative experience learning courses, and to apply the developed program to 6th graders in an elementary school located in Seoul. Research was conducted in a large category called biophilia, which named the instinct of human nature and nature throughout the research. The curriculum revised in 2015 was selected for the purpose of the garden education program based on the objectives and contents of the unit, and for the purpose of the class. In the process of developing and implementing the program, experience properties and elements were divided into direct and indirect experience of nature, including shapes and forms found in nature, air, water, plants, weather, animals, and natural materials. The results showed that the biophilic horticultural education program was effective in promoting students' multi senses. In the case of the experimental group, all the multi-sensory areas showed statistically significant differences, especially in the area of environmental literacy, environmental effect and emotional balance including plant cultivation knowledge. There was a relatively smaller difference in the dietary effect area than other areas because of no directional dietary program was included in the developed program. As a result, first, it is expected that the data can be utilized on site as a program or place of activity for students in upper grades. Second, it will be necessary to develop a more diverse program using other biophilic elements that were not covered in this study in order to maximize the effects of biophilic education.

• Journal of the Korean Society for Library and Information Science
• /
• v.16
• /
• pp.33-53
• /
• 1989

The purpose of this paper is to forecast the future of library education in Korea. Toward this purpose, first, the historical events of library education in the United States of America and in the United Kingdom are introduced along with the IFLA Standards for Library Schools and the Unesco's General Information Programme. Secondly, the theoretical foundations of library education are extracted from the events. Thirdly, the factors influencing library education as well as library developments are identified, and, finally, the prospects of library education are forecasted in the light of the various factors in the Korean society and the theoretical foundations. The prospects are forecasted as follows: 1. The education for information science will be incorporated in library education. 2. The number of courses related to library services and uses will be increased. 3. The students should be provided with enough hands-on experiences to be familiar with new information technology. 4. The cooperation between library schools and libraries will be reinforced. 5. The departments of library science will cooperate with other departments in the universities in order to utilize the expertise and facilities. 6. The education of graduate schools will be specialized to produce subject specialist librarians and the undergraduate education will produce public and school librarians. 7. Opportunities for continuing education will be provided more and librarians encouraged to participate in those activities. 8. Library association should actively be involved in library education as a provider of continuing education or as a liaison between library schools and libraries. 9. The courses of foundations including library history, library research and preservation of culture will never be neglected.

• Journal of The Korean Association of Information Education
• /
• v.21 no.5
• /
• pp.567-581
• /
• 2017

The purpose of this study is to analyze the facilitating and conflicting factors on the emerging technologies and trends predicted to impact future education in Korea. To do this, open online questionnaires on 20 emerging technologies and trends derived from a comprehensive literature review were completed by 24 experts in research, policy, schools, and corporate fields, and a content analysis of the collected qualitative data was conducted. As a result of the study, the effectiveness of the content and the maturity of technology were found to be the most important facilitating factors and obstacles. In addition, the potential for innovative teaching and learning methods and motivation, and the maturity and popularity of technology were found to be the main facilitating factors. On the other hand, health problems and negative effects on students in ethical aspects, the lack of research and development, and poor networks and infrastructures in terms of education environment were found to be the main impeding factors of emerging technologies and trends.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.19 no.1
• /
• pp.52-59
• /
• 2013

Purpose: This study was performed to identify in nursing students the effects of simulation practice for hemorrhagic patients. Methods: Subjects were sophomore nursing students in Daegu (n=133). A self describing performance questionnaire which included knowledge, skill and attitude towards bleeding patients was given. Consent was received from students. The data was analyzed by ANOVA with Scheffe's test and Mann-Whitney U test using the SPSS 12.0 Program. Result: Subjective and objective knowledge and skill showed significant improvement in the control group, especially in assessment, correct medication administration, explaination of NPO and preparing the crash cart for a cardiac arrest. Objective knowledge and skill was significantly higher in the control group although attitude was not. Conclusion: Simulation practice was an effective education method for improving knowledge, skill and attitude in nursing students.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.169-178
• /
• 2015

This research aims to study the effects of various welding parameters in gas metal arc welding (GMAW) process on welding penetration, microstructure and hardness of AS3578-A350 high strength steel with the thickness of 10 mm. The welding process parameters were a welding current of 100-200A, an arc voltage of 20-30V, a welding speed of 20-60 cm/min and a gas shielding type of Ar and $Ar+CO_2$. The summarized experimental results are as follows. An increase of the welding current and voltage affected to increase the penetration depth of the joint. However, when the welding speed was decreased, it increased the penetration depth of the joint. Using the Ar gas for shielding the weld area, produced the higher penetration depth and the less narrow weld bead than the joint that was shielded by the mix gas of $Ar+CO_2$. The variation of the welding process parameters affected to produce the various microstructures of weld metal and heat affected zone and also showed the various kind of hardness along the weld joint.