• Transactions of the KSME C: Technology and Education
• /
• v.4 no.2
• /
• pp.93-99
• /
• 2016

High pressure nozzles and turbines of a gas turbine engine should be required to be operated under extreme operating conditions in order to maximize the performance. Engine manufactures have utilized nickel-base superalloys, enhanced cooling design, and thermal barrier coating techniques to overcome them and furthermore, material modeling, finite element analysis, optimization techniques, and etc. have been utilized widely for elaborate predictions. We aim to evaluate the effects on the low cycle fatigue life of the high pressure turbine blade caused by thermal barrier coatings and the cooling design of the endwall of the first stage turbine nozzle. To achieve it, the structural analysis, which utilized the results of conjugate heat transfer analysis as loading boundary conditions, was performed and then the results were the input for the assessment of low cycle fatigue life at several critical zones.

• Journal of radiological science and technology
• /
• v.41 no.4
• /
• pp.329-337
• /
• 2018

This study was investigated quantitative ultrasound (QUS) usage in Korea for the QUS quality control guidelines. A total of 344 questionnaires collected from July 24th to August 25th 2017 were analyzed. Questionnaires were created through user interviews, expert group advice, literature review and field observation. As a result of the general characteristics of quantitative ultrasound holding amounted to 81.98% of clinic and 6.69% of hospitals. The main user was radio-logical technologists as 31.39%. The contact methods of the gel pad (balloon) were the most used at 56.68% and the scan region was 91.9% of calcaneus. The quantitative ultrasound quality control cycle was 67.37% when the abnormality was found in the equipment, and 63.66% when the accuracy control was implemented according to the manual. The phantoms of QUS were 34.30% of the manufacturer's own phantoms. User of QUS had never received education for quality control of quantitative ultrasound as 62.20%. This study was expected to be useful when creating detailed quality control guidelines in the future, as well as guidelines for the quality control of Korea's standard quantitative ultrasound.

• Journal of Technologic Dentistry
• /
• v.33 no.2
• /
• pp.159-170
• /
• 2011

Purpose: This study were to analyze satisfaction with job ability development training among Dental Technicians', examine the degree of their actual satisfaction with training courses and their status, and provide some basic data to help improve the quality level, satisfaction, and effective operation of job ability development training in the future. Methods: This study carried out self-administered questionnaire survey from January 15, 2011 to March 10 by having research subjects as 180 dental technicians who participated in the course of employees' Job Ability Development Training by 'Gil Occupational Training Institute,' which is being conducted as part of dental technicians' job ability development in Seoul region. Among these things, 160(88.8%) copies were collected. Except 19 copies with incomplete response, 141(78.3%) copies were used as the materials of final analysis. Results: First of all, as a result of grasping the whole satisfaction with training according to general characteristics, the significant difference was indicated in the whole satisfaction with training depending on gender & age, and voluntary participatory intention. Second, the satisfaction with contents of Job Ability Development Training was in order of helpful level in ability development with 4.10(${\pm}.70$), co-worker's recommendation and a plan for reparticipation with 4.08(${\pm}.77$), consistence with the content goal with 4.07(${\pm}.71$), and reflection of demand with 4.01(${\pm}.70$). Third, examining satisfaction with instructors of Job Ability Development Training, it is being indicated with a little higher score compared to the satisfaction with other items. Fourth, satisfaction with service of supporting learners in job ability development training was shown to be slightly low in all the items. Especially, the convenience of administrative procedure was indicated to be the lowest with 3.52(${\pm}.92$) Fifth, satisfaction with the facility of job ability development training was showing very low satisfaction compared to other satisfaction items. Conclusion: A continuous effort will be needed in order to be possibly strengthened dental laboratory technicians' professionalism and reinforced qualitative level in major ability through offering more educational opportunities and education in good quality.

• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.187-195
• /
• 2011

A ship handling simulator is popular means of preventing marine accidents caused by human error. It can also be used to train navigators. A real-time 3D visualization system, a component of a ship handling simulator, is an important component, as realistic and intuitive image generation play an essential role in improving the effects of education using ship handling simulators. This paper discusses the design of a new real-time 3D visualization system based on an open source 3D graphics engine as well as its implementation. The developed real-time 3D visualization system satisfies the operational requirements derived in terms of visualization functionalities, reuse of legacy graphic data, and interoperability with other systems constituting a ship handling simulator. This system has an architecture in which new functionalities are easily added.

• The Korean Journal of Emergency Medical Services
• /
• v.7 no.1
• /
• pp.55-64
• /
• 2003

The purposes of this study which was conducted by applying three projection formulae to the data from admission quota for paramedic of the Ministry of Education & Human Resources Development the number of ambulances the number of emergency medical centers of the Ministry of Health & Welfare and rate of successful candidates of annual report of the National Health Personnel Licensing Examination Board were to find out demand and supply of paramedic from 2002 to 2045 and to expand scope of practice of paramedic in Korea. The conclusions from this study were summarized as follows; (1) The simple formulae derived from the projection formula of the Economic Planning Board were applied under the present Emergency Medical Services Act including qualifying over 3-years experienced EMT-Basic for paramedic examinee, stationing paramedic or EMT-Basic or physician or nurse per ambulance, stationing paramedic or EMT-Basic per emergency medical center and under the amended Emergency Medical Services Act including qualifying only paramedic graduate for paramedic examinee, stationing 4.5 paramedics per ambulance, stationing 10 to 2 paramedics per emergency medical center. (2) It was estimated that on the American basis of 5.6 EMTs per 10,000 in 1996, the number of paramedics under the present act will reach the basis before 2020, the number of paramedics under the amended act will reach the basis about 2040. (3) It was estimated that on the basis of 22,000 paramedics demanded from the number of ambulances, the number of emergency medical centers in 2001, the number of paramedics under the present act will reach the basis before 2015, the number of paramedics under the amended act will reach the basis about 2030. (4) There was relationship between requirements for emergency medical centers scope of practice of paramedic in the act and demand-supply of paramedic, this necessitates surveys, studies, amendment of the act, legalization for expanded scope of practice of paramedic including EMD, instructor, teacher of safety. (5) This study which includes only expanded scope of practice of paramedic and projection for paramedic in the act needs complementary studies such as decision-making process in health manpower policy and so on.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2013

Ftheta Lens, whose image height is proportional to its field view angle, is one of the most important parts in Laser Scanning Unit(LSU). In this paper $f{\theta}$ lens design, mold production and modification method of lens design and mold are introduced. Lens design was carried out with Zemax and Special Toric surfaces were applied for lens surfaces to minimize distortion both in main and sub scanning directions. And a high precision machine with 1nm resolution was used to fabricate lens mold cores. After injection the lens was evaluated and the difference from design was examined. This difference was compensated by modifying lens design and new lens mold cores were made according to modified lens design to obtain the quality of original design.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1932-1940
• /
• 2004

Although the previous researches evaluated the fatigue behavior of Al/GFRP laminates using the traditional fracture mechanism, their researches were not sufficient to do it : the damage zone of Al/GFRP laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of Al/GFRP laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length (a) and delamination width (b) in Al/GFRP laminate. The details of investigation were as follows: 1) Relationship between the crack length (a) and the delamination width (b), 2) Relationship between the delamination aspect ratio (b/a) and the delamination area rate ((A$\_$D/)/subN// (A$\_$D/)$\_$All/), 3) The effect of delamination aspect ratio (b/a) on the delamination shape factor (f$\_$s/) and the delamination growth rate (dA$\_$D// da). As results, it was known that the delamination aspect ratio (b/a) was decreased and the delamination area rate ((A$\_$D/)$\_$N// (A$\_$D/)$\_$All/) was increased as the normalized crack size (a/W) was increased. And, the delamination shape factors (f$\_$s/) of the ellipse-II(f$\_$s3/) was greater than of the ellipse-I(f$\_$s2/) but that of the triangle (f$\_$s1/) was less than of the ellipse-I(f$\_$s2/).

• Archives of design research
• /
• v.20
• /
• pp.99-109
• /
• 1997

The Bauhaus movement can be said to be the by-product of forming work pursued through the method of constituents even under endless discord between the so-called modern ages and anti-modern ages rather than to say that it was progressed consistently on the assumption of a design. Accordingly, all instruments of Bauhaus education which contributed to form the source of the modern ages realized educational value related to the actual problem at the point of time when the student evercomes all internal and production can be managed most effectively under one system was originated inevitably. The most exential point of the work of Bauhaus workshop is the fact that all products show homogeneity as time passes, which is appeared as the result of the spirit of consciously developed community based on cooperation between various characters and personalities. Also, the homogeneity does not exist in formative detailed aspect appeared externally but in the basis of effort having produced things simply and faithfully, and on the other hand, in accordance with essential rule. Therefore, the original form of Bauhaus products can be said not to be fashionable but the crystal of work process at the workshop through much thought and contemplation in view of endowed form following art, technology and economy.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.307-314
• /
• 1993

Plasma protein adsorption is the first event in the blood-material interaction and influenc- es subsequent platelet adhesion towards thlㅈombus formation. Thiㅈomboembolic events are strongly influenced by surface characteristics of materials and fluid dynamics inside the blood pump. In vitro flow visualizaion and an amimal experiment with the moving actuator type TAH were Performed in order to investigate fluid dynamic effects on the protein adsorption. The diffel'encl level, j of shear rate inside the ventricle Lvere determined by consid- ering the direction of the major opening of four healt valves in the implanted TAH and the visualized flow patterns as well. Each ventricle of the explanted TAH was sectionalized into 12 segments according to the shear rate level. The adsorbed protein on each segment was quantified using the ELISA method after soaking in 2% (wye)SDS/PBS for two days. Adsorbed protein layer thicknesses Itvere measured by the Immunogotd method under TEM. The SEM observation show that right ventricle (RV) , immobilized with albumin, displayed different degrees of platelet adhesion on each segment, whereas the left ventricle (LV), grafted by PEO-sulronate, indicated nearly , iame platelet adhesion behavior, regardless of shear rates. The surface concentrations of adsorbed proteins in the low shear rate region are hlghel'than those in the high region, which was confirmed statistically. A modified adsorption model of plasma protein onto polyurethane surface was suggested by considering the effect of the fluid dynamic characteristics.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.546-557
• /
• 2016

Tooth carving practice is required for novice learners in dentistry to understand dental morphology and acquire clinically underlying skills. Tooth carving practice is more effective when sequential models can be observed. The purpose of this study is to suggest a tooth carving practice model and to develop a mobile practice supporting tool based on tutorial providing 3D modeling information about steps of tooth carving. As a result, tooth carving practice model consists of the class activity including tooth information lecture and practice and mobile seamless learning connecting learners' practice and regular learning with the mobile tutorial tool. The mobile tutorial tool is implemented with tooth morphology dictionary, tooth carving practice/training tutorial, and 3D tooth modeling. The experts' evaluation on the developed contents shows that the content and function are valid(content validity: 5.0, interface validity: 4.53). Therefore, the mobile tutorial tool is suitable for supporting mobile seamless learning for tooth carving practice. Further researches are expected to be conducted to develop instructional models utilizing ICT and mobile contents in dentistry.