• 제목/요약/키워드: Technology Value Assessment

검색결과 605건 처리시간 0.026초

국방 품질보증 활동 강화를 위한 샘플링 방법 개선: 전투물자 및 탄약 분야 사례 위주 (Sampling Procedures Enhancement in Government Defense Quality Assurance Procedures: Case Studies in Combat Force Support Material & Ammunition Areas)

  • 안남수;정지선;정운권;황우열;박상원
    • 품질경영학회지
    • /
    • 제40권3호
    • /
    • pp.245-258
    • /
    • 2012
  • Purpose: Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat boots defects and 40mm ammunition explosion accident. To address these problems, the one and only government defense quality assurance agency, DTaQ(Defense Agency for Technology & Quality) tried to improve many quality assurance procedures and introduced new systems such as MRA(Manufacturing Readiness Assessment), TRA(Technology Readiness Assessment), and etc. However, as the amount of war supplies increasing every year, the resource(budget and manpower) for quality assurance is limited. Therefore, DTaQ had difficulty to handle the issue efficiently and effectively, and we propose the method to address this problem. Methods: The most popular quality assurance technique is a sampling method, in this research, we first review the many sampling techniques and compare the strength and weakness of each method. After then, we selected the most appropriate sampling techniques and applied the procedures in combat force support material and ammunition areas. Results: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Conclusion: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Lastly, since the new sampling method requires many numerical calculations, we developed a simple android OS smart-phone application which can be used easily in field.

Assessment of cerchar abrasivity test in anisotropic rocks

  • Erarslan, Nazife
    • Geomechanics and Engineering
    • /
    • 제17권6호
    • /
    • pp.527-534
    • /
    • 2019
  • There have been developed a number of methods to assess the abrasivity of rock materials with the increased use of mechanized rock excavation. These methods range from determination of abrasive and hard mineral content using petrographic thin section analysis to weight loss or development of wear flat on a specified cutting tool. The Cerchar abrasivity index (CAI) test has been widely accepted for the assessment of rock abrasiveness. This test has been considered to provide a reliable indication of rock abrasiveness for isotropic rocks. However, a great amount of rocks in nature are anisotropic. Hence, viability assessment of Cerchar abrasivity test for the anisotropic rocks is investigated in this research. The relationship between CAI value and quartz content for the isotropic rocks is well known in literature. However, a correlation between EQ, F-Schimazek value, Rock Abrasivity Index (RAI) and CAI of anisotropic rocks such as phyllite was done first time in literature with this research. The results obtained with this research show F-Schimazek values and RAI values should be considered when determination of the abrasivity of anisotropic rocks instead of just using Cerchar scratch test.

휴대폰 렌즈모듈 조립라인 설계안 결정을 위한 경제성 분석 및 AHP응용 (Economic Assessment and Application of AHP for Determining the Design of Assembly Line for the Lens Module of Mobile Phone)

  • 문덕희;이근현;송준엽
    • 한국생산제조학회지
    • /
    • 제20권4호
    • /
    • pp.509-515
    • /
    • 2011
  • When a manufacturing system is designed, various kinds of evaluation methods are used for selecting the best alternative. Net present value, inner rate of return and payback period are popular quantitative measures for the economic assessment, but other qualitative measures should be considered for evaluation. The analytic hierarchy process(AHP) has been used as the popular method for the multi criteria decision making problem that considers both quantitative and qualitative criteria. This paper explains the process of economic assessment, and how to use the AHP for evaluating the designs of the assembly lines for lens module installed in mobile phone.

Strategic Business Values of the Blockchain Technology Market to Assist Professionals: Deployment Perspective

  • Waleed Rashideh
    • International Journal of Computer Science & Network Security
    • /
    • 제23권2호
    • /
    • pp.210-226
    • /
    • 2023
  • It is difficult to transform a blockchain initiative from the feasibility stage to the fully commercialized the technology's products or services, especially considering the significant investment required and the lack of studies on the benefits and barriers from deployment perspective. Whereas some organizations have come up with their own solutions to moving beyond the feasibility stage, commercial applications do not yet exist and few organizations are willing to invest beyond the prototype phase and fill in the gap between the expected and actual business value of these types of projects. This study aims to develop a blockchain model using a survey to gather qualitative data on experts' opinions on the deployment of blockchain technology. Our model will measure how business professionals could take advantage of blockchain's disruptive technology to develop business opportunities. This study's contribution is to show blockchain technology's potential strategic business value. The findings from this exploration include the prospective for delivering comprehensions to businesses for different creating investment choices on the embracing of the blockchain technology.

용도 지역 행위 제한을 고려한 국토환경성평가지도 법제적 평가 개선 (Improvement in Legislative Assessment of the Environmental Conservation Value Assessment Map Considering the Restriction on Acts of Special-Purpose Areas)

  • 양현재;김근한;윤정호;전철민;이은정;황소영
    • 한국환경복원기술학회지
    • /
    • 제21권1호
    • /
    • pp.13-30
    • /
    • 2018
  • In terms of environmental friendly land use and objective environmental assessment, legislative assessment items of Environmental Conservation Value Assessment Map (ECVAM) consists of designated areas related to conservation and protection, and areas that are planned to be designated in the future. However, the gap with the reality due to omission of several protection areas and land use regulations, and assessment grades according to 3 division land use map of forest, agricultural land, and urbanized area, results in low application and utilization of ECVAM. Therefore in this study, the legislative assessment of the ECVAM was performed with new assessment items and its new ratings, to suggest an improvement in legislative assessment items of the ECVAM. As a result, legally protected areas of inhabited islands under absolute conservation, special wildlife protection districts, protected marine areas, environmental preservation sea areas, scenic spots, forest protection zone, traditional temple preservation zone, and 45 zone or district related to regulation of land use were additionally designated as new legislative assessment items. New grade ratings were given to each additional assessment items in consideration of the restrictions on acts. As a result of the legislative assessment based on the new assessment items and new grades, the 1st grade area increased by 3.47%, and the 2nd grade area increased by 19.35%. The 3rd grade area decreased by 8.54%, the 4th grade area increased by 2.95%, and 5th grade increased by 2.91%. In addition, the out-of-grade area decreased by 20.14%, considered to be a realistic assessment based on land use. With the improved legislative assessment, it is possible to provide a more accurate environmental assessment map. Increase usage of ECVAM is expected in providing regulations of land use and base data for integrated land management of land environmental planning.

Comparison of Monte Carlo Simulation and Fuzzy Math Computation for Validation of Summation in Quantitative Risk Assessment

  • Im, Myung-Nam;Lee, Seung-Ju
    • Food Science and Biotechnology
    • /
    • 제16권3호
    • /
    • pp.361-366
    • /
    • 2007
  • As the application of quantitative risk assessment (QRA) to food safety becomes widespread, it is now being questioned whether experimental results and simulated results coincide. Therefore, this paper comparatively analyzed experimental data and simulated data of the cross contamination, which needs summation of the simplest calculations in QRA, of chicken by Monte Carlo simulation and fuzzy math computation. In order to verify summation, the following basic operation was performed. For the experiment, thigh, breast, and a mixture of both parts were preserved for 24 hr at $20^{\circ}C$, and then the cell number of Salmonella spp. was measured. In order to examine the differences between experimental results and simulated results, we applied the descriptive statistics. The result was that mean value by fuzzy math computation was more similar to the experimental than that by Monte Carlo simulation, whereas other statistical descriptors by Monte Carlo simulation were more similar.

프로바이오틱스 Enterococcus faecium CKDB003의 항생제 내성 및 안전성 평가 (Antibiotic Resistance and Safety Assessment of Enterococcus faecium CKDB003 for Using as Probiotics)

  • 김한준;강순아
    • 한국식품영양학회지
    • /
    • 제33권3호
    • /
    • pp.223-236
    • /
    • 2020
  • In this study, a safety evaluation was conducted to confirm if the Enterococcus faecium CKDB003 strain obtained by selection from a mixed fermentation of fruit and milk is suitable for use as a probiotic. The MIC value for the 10 antibiotics specified in the EFSA guidance was below the acceptable cut-off value. The antibiotic resistance genes aac(6')-li, eatAv, and msr(C) exist by whole genome sequencing, but are in the chromosome and not in the plasmid, thus confirming that there is no possibility of transmission to other microorganisms. It was confirmed that cytolysin (cylA, cylB, cylI, cylL-l, cylL-s, cylM, cylR1, cylR2), aggregation substance (asa1, asp1), collagen adhesion (ace), enterococcal surface protein (esp), endocarditis antigen (efaA), hyaluronidase (hyl) and gelatinase (gelE) were not present in the genome by examining the genes of factors related to virulence. Also, the biochemical analysis showed no toxic enzyme activities, and no virulence genes were detected by the PCR method. Thus, the E. faecium CKDB003 strain can be safely used as a health functional food probiotic, based on the results of the safety assessment.

제조성숙도평가 MRL8 평가 방법론에 관한 연구 (A Study on the Methodology of Manufacturing Readiness Levels(MRLs) 8 of Manufacturing Readiness Assessment(MRA))

  • 이지혁;정영탁;임재성
    • 한국산학기술학회논문지
    • /
    • 제18권6호
    • /
    • pp.609-619
    • /
    • 2017
  • 제조성숙도평가(Manufacturing Readiness Assessment, MRA)는 제조 준비상태를 평가하는 방법으로 체계, 부체계의 개발 및 양산에서 발생할 수 있는 일정지연, 비용 상승, 품질 저하 등을 방지하지 위해서 2012년에 제도화되었다. 제조성숙도 평가는 군수품의 양산단계의 제조상 위험성을 사전에 식별하여 관리한 결과, 군수품의 품질수준이 개선되는 등 긍정적인 효과가 있었으나 실제 수행 시 피평가자가 평가항목에 대해 맞춤형으로 준비를 하면서 평가점수가 점차적으로 높아지는 등 준비상태 점검이라는 본래의 목적과는 달리 점수만 상승하는 평가점수 인플레 현상이 심화되는 문제점이 식별되었다. 본 연구에서는 이러한 문제점을 극복하고 과거 업체의 MRA 평가항목 이력을 반영하기 위해 HOM8, 평가항목 난이도를 반영하기 위한 DOM8, 평가항목의 중요도 및 사업별 특성을 고려한 ICOM8과 M8RA를 각각 정의하여 네가지 지표 가중치를 적용한 MWV(Manufacturing Readiness Level 8 Weighted Value)을 정의한 정량적인 MRA 평가모델을 제안한다. 제안된 모델을 통해 기존에 실시된 4개 사업에 대한 평가항목 간 MWV를 계산하였으며, 이를 통해 제안된 MRL 8 평가 방법론의 개선결과를 분석하였다.

국방 핵심기술의 성숙도(Readiness Level)평가를 활용한 국방기술가치평가 방안 연구 (A Study on the Evaluation Method of Defense Technology Valuation Using the Readability Level Assessment of Core National Defense Technology)

  • 이형석;신충진;강석중
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1710-1719
    • /
    • 2019
  • 본 연구는 다양한 기술의 융합과 체계통합기술이 고도로 복잡하게 요구되는 국방기술을 이해하고, 분야별 특성이 반영된 가치평가방법을 제안하고자 한다. 가치평가 대상 무기체계의 기술 수준의 척도, 기술 간의 통합(체계통합기술)척도, 제조준비 및 성숙도 척도를 측정요소별 항목에 맞추어 측정하여 시스템성숙도를 확인하고, 시스템의 성숙도를 활용한 핵심기술의 계량적인 가치예측모형의 틀을 제시하고자 한다. 국방기술의 가치를 기술분야별 특성을 고려하여 이에 맞는 가치평가방법을 제안하는 연구이다. 각 분야의 역량있는 기술전문가들에 의해 분야별 기술적인 특성이 반영된 평가 기준에 따라 평가되고, 전체 시스템의 완성도를 정량적인 수치로 표현할 수 있는 시스템성숙도(SRL)를 활용하여 국방기술가치를 평가하는 방안을 제안한다.