• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.1
• /
• pp.381-400
• /
• 2018

The purpose of this study is to analyze the currently operating subject guides in academic libraries and to suggest measures for improvements of them. To do this, 22 out of 151 academic libraries which have more than 1,000 enrolled college students in the university and two institutes of science and technology were selected and the libraries were analyzed according to 12 criteria. The main results of the data analysis were as follows: First, the subject guides did not clearly indicate which service tool to use. Second, there was a difference in the subject guide format in the same academic library. Third, libraries tried to provide a lot of information sources on the subject guides without considering users' needs. By offering many kinds of information sources, students had to choose the information sources they needed. Improvement plans are: First, it is necessary to develop the subject guide of the college courses. Second, Content-based subject guides are necessary through standardized format. Third, it is necessary to unify the name of menu of information resource. Fourth, the number of information sources included in the subject guides should be minimized. Fifth, it is necessary to establish a cooperation system between academic libraries to develop the subject guides.

• The Korean Journal of Emergency Medical Services
• /
• v.19 no.2
• /
• pp.83-97
• /
• 2015

Purpose: Although appointed as a national competency standards (NCS) based reserves department, the department of emergency medical technology, an NCS-based emergency department, is mainly focused on subject deduction for a NCS-based curriculum. Methods: Job models were formed and verified by combining the competency unit of NCS and the duty of Developing a curriculum (DACUM) based on the development procedure indicated in the guidelines for a NCS-based curriculum. The mapping method of the subject was performed by deducting necessary competency units (duty) and competency unit elements (task) by connecting with the composition items of NCS and DACUM. Results: Job models combined with job analysis for the NCS and DACUM were reduced to 13 competency units (duty) and 79 competency unit elements (task). A modified method such as the 1:N method was mainly applied as a subject-matching method with consideration of the competency level and size of the competency unit. Conclusion: It would be a desirable direction to develop a NCS-based curriculum in the center of the practice subject in consideration of the size of the competency unit and competency level of the competency unit element. The existing curriculum should be promoted as a field-oriented curriculum at the complementary level.

• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.72-83
• /
• 2000

In recent years considerable progress has been made in the characterisation of surface finish in three dimensions, and in the development of protocols which can be used for international standardisation. Although the subject as it has currently developed has much further to go if the process of surface characterisation is to impact on manufacture, control and specification of the manufacturing process itself. Researchers in this important area are beginning to realise that if the subject is to have great impact on manufacturing industries, surface characterisation must be broadened to include measures of surface integrity of the component and in addition be related to the functional demands imposed on the surface. The functional demands being a requirement of the engineering situation in which the components are employed. If these three factors are considered simultaneously, surface characterisation, surface integrity and component function, then a new and important subject is born, the subject of the Engineered Surface. Part 1 of this paper attempts to draw together the elements which go together to create the subject, 'The Engineered Surface'. The paper presents a method by which this important subject can be developed to the benefit of manufacturing industries. The paper also discusses the importance of a co-ordinated approach to the subject and the way that information can be documented to eventually provide a useful atlas of controlling parameters which are essential for a range of material processing industries as they strive to meet the ever more stringent and cost effective requirements of the manufacture.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.15-26
• /
• 1998

The role of the Engineer in the era of nano-technology is explored, a trend in manufacture which is expected to yield a ＄20-30 billion per annum business throughout the world by the year 2020. The engineers who will be working in this subject will be required to have broadly based experience, over a range of traditional disciplines, such as physics. electronics, software engineering, control and mechanical engineering. As well as having an appreciation of other disciplines such as air conditioning, vibration analysis and its minimisation, the selection of materials for maximum stability and minimal thermal distortion as well as an understanding of ultra precision design and nano tribology. In other words the engineer who is to be successful in this new and emerging field, will have to be broader based than engineers of the past, where it was traditional to break up the elements of a discipline to smaller subsets. But as nano-technology advances and the subject brings about the evolution of nanotronics to provide a successful solution to emerging problems, it will be essential for a breed of engineers to develop who can consider the subject in a holistic manner. This paper therefore considers the emergence of nano-technology, predicts the subsets of the development and places them in context of the new engineer which will be required in increasing numbers. The paper summarises the skills of the proposed nanotronics engineer and provides a basis for their training and development.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.91-111
• /
• 1997

An aim of this study is to find out influenced factors of satisfaction degree on the clinical practice for the dental technology student and it can be provided the basic necessary data for the educational planning of the curriculum for the clinical practice. The target of study are selected form 7 junior health college students and colleges are located in around seoul form 14 junior health college throughout the nation. The questionnaries were distributed between 24th Feb to 30th July in 1997 to the 100 dental technicians who finished clinical practice and entered profession in 1997. All collected data were analysed by using SPSS/PC, Technical Statistic, One-Way ANOVA, Ttest, Person Correnlation Coefficient, Chrobach Alpha Coefficient and the result of the study is follow. 1) The satisfaction degree were classificated as 7 aspect and overall average score was 3.042. During that period satisfaction of personal relation aspect(M=3.737) shows highest level. Satsfiaction of clinical parctice(M=3.571) shows as second, Satisfiaction of environment(M=3.028), Satisfaction of guidance(M=2.915), satisfaction of subject are ordered of their scores. According to above study satisfaction's degree of subject show lowest level. 2) According to the result of verification of study. general character of student and satisfiaction degree has not much relation with sex, location of college, religion, period for enrolling college, teaching method of clinical practice. But the result show similar relation with following items. Satisfaction if subject and satisfaction of clinical practice(P=0.000), place of clinical practice and satisfaction of clinical practice(P=0.002), Academic record of college and satisfaction of clinical practice(P=0.000). 3) The relation of satisfaction(Subject, method of teaching, environment, period, rating, personal relation) of clinical practice and age of investigation's target Older student show higher satisfaction(P=0.040). Also method of teaching, environments, period, rating, personal relation has similarities with satisfaction. Therefore student who has higher satisfaction of clinical practice they also have higher rate for subject, environment, period, personal relation. 4) The result fo investigation, most interesting subject was crown & bridge and most difficult factor was too many simple-works to the student. One of ideal factor was discussing with counselor before they choose place for clinical practice. Third grade and first semester is most efficient time for clinical practice and 8 week is proper period for clinical practice. Clinical practice is absilutory mecessary and we find out most student rated positively. However we need more specific study about satisfcation of each subject. Because it shows lowest level and we need more pay attention for planning of clinical practice.

• Hwankyungkyoyuk
• /
• v.19 no.2 s.30
• /
• pp.1-11
• /
• 2006

In Korea nearly all the subjects teach environmental education in the secondary school. In addition we have a separate environmental education subject (environmental subject). This could be a very strong point in the Korean environmental education. The environmental subject and the other subjects, however, overlap in teaching materials and methods in almost all aspects. Because of this, the environmental subject has not done its job effectively, and is sometimes considered as an unnecessary surplus. To effectively play its own role in environmental education, the subject should focus on environmental issues rather than on contamination, which it is focusing on now. The contamination-focused environmental subject simply teaches nearly the same contents that the other subjects teach. In addition, it makes students visit actual sites related to pollution in order to encourage them to be aware of the severity of pollution. However, it has difficulty in teaching how environmental problems occur in a society and how the social decisions are made to resolve the problems. To overcome this difficulty the environmental subject should employ discussion classes more substantially, which let students investigate social aspects as well as scientific aspects of environmental problems and make integrated decisions through interdisciplinary approaches, to make students understand social mechanisms of environmental problems. The subject should focus on teaching what factors influence producers' and consumers' behavior and what factors they should consider when they have to make decisions on environmental issues. It should leave teaching technical knowledge and skill to the other subjects, and train students by the integrated approach which makes them see technology through a sociologist's eye. Although such integrated approach is emphasized in the environmental subject, environmental teachers should be trained to understand technological knowledge and skill in profound depth.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.381-387
• /
• 2018

The purpose of this study is to make a lot of efforts for student employment in government or university. therefore We have developed Start-up Consulting courses that include easy to find jobs, convergence and multidisciplinary knowledge. The results of the comparison between university and graduate school, management consulting, and start-up consulting curriculum were reviewed according to STEAM 's rules. The results were divided into 5 main classes and 15 sub classes according to the 15 week subject. As a result of the study, we divided into 5 main classes and 15 sub classes in accordance with the 15 week subject. We were able to apply the understanding to the 1st stage company understanding(Arts), 2 stage consulting ability(Technology) 3 stage entrepreneurship strategy(Technology) 4 stage sub consulting(STEAM) 5 stage management case analysis(Arts).

• Research in Mathematical Education
• /
• v.17 no.1
• /
• pp.47-61
• /
• 2013

This paper aims to explore whether Learning Study improves teachers' subject content knowledge, pedagogical content knowledge, and attitude toward teaching mathematics. A Learning Study was conducted in a Hong Kong primary school for a research lesson on comparing the size of fractions to explore the new teacher roles.

• Annual Conference on Human and Language Technology
• /
• 1995.10a
• /
• pp.264-280
• /
• 1995

한 문장의 주어가 우리말에서처럼 수의적으로 나타날 수 있는가 혹은 영어에서처럼 반드시 표면에 나타나야 하는가에 따라 공주어언어 (null-subject language)와 비공주어언어(non-null-subject language)로 분류된다. 이러한 주어 탈락 현상에 대하여 이론적으로 다양한 가설이 제기되어 왔다. 본 논문에서는 한국어의 언어 습득 자료에 나타나는 주어 탈락의 양상을 살피고, 이를 비공주어언어인 영어자료와 공주어언어인 이탈리아어, 포르투갈어, 중국어자료와 비교함으로써 궁극적으로 이론적 가설을 비교 평가하는 데 이바지하고자 한다.

• Human Ecology Research
• /
• v.55 no.5
• /
• pp.539-553
• /
• 2017

This study explored the organization of high school Home Economics (HE) selective curriculum for the Fourth Industrial Revolution. We critically review the change process of HE curriculum as well as problems based on the understanding of the Fourth Industrial Revolution. The results were as follows. First, regarding the characteristic consistently shown in the revision process of high school curriculum, the huge increase of the number of subject organized resulted from the intensification of the selective-centered curriculum strengthening the choice for school and students. However, HE was reduced to some 'Technology-Home Economics' subject and a single subject 'HE Science' as a selective subject was subsequently combined with Technology after the $7^{th}$ curriculum period. Consequently, HE hard to organize the career-focused curriculum, emphasized by the revised 2015 curriculum due to the insufficient number of subjects. Second, the choice of HE in high school curriculum should be expanded as measures to organize the HE curriculum of high school to cope with changes that result from the Fourth Industrial Revolution. For the operation of the career-focused curriculum, career selective subjects and specialized subjects should be more diversely established. In accordance with changes in a future society that results from the Fourth Industrial Revolution, the HE education community should be prepared in advance to be organized as a selective subject when revising a subsequent curriculum, by newly establishing subjects necessary to students through collective intelligence and deliberation with pedagogists and scholars for subject content as well as by producing/getting approval from government-recognized textbooks.