• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.551-557
• /
• 2007

This paper describes a study on the permeability reduction of the riverbed ground during urban railway tunnel construction. The research is mainly concentrated on the study of the grouting or injection methods among permeability reduction methods which can be adapted in the riverbed ground. Firstly, the various grouting methods are theoretically reviewed and compared based on the previous research papers and case study results. It is also evaluated the grouting methods in view of a safe construction of the river crossing railway tunnel. Baced on the literature review and previous construction data, the design technology of grouting methods considering the long term hydro-geological behaviour in the riverbed, is suggested. Two injection methods namely, Natural Durable Stabilizer(N.D.S) and Space-Multi Injaction Grouting(S.M.I) methods, are introduced as new approach methods which can be adopted to modify the riverbed ground. In order to evaluate the ground that grouted and modified by the N.D.S and S.M.I method, the pilot test programmes including the field and laboratory permeability tests, are carried out in the river crossing tunnel construction sites. The results obtained from pilot test programme, are also reviewed. In conclusion, the grouting efficiency of the S.M.I method using the non-alcalimeter silica sol is better than that of NDS method using cement. In addition, it hopes that the research results are contributed to develop the grouting design technology.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2015

Recently, much attention has been paid to the development of a value-added food category containing probiotics so as to improve human health and prevent diseases. Among various foods, the health benefits of milk and dairy products are known to humanity, and could be attributed to the bioactive components present in milk. In fermented milk products, the health benefits could be due to suitable modulation activities produced by the action of probiotic bacteria. Besides the modification of various milk components, probiotics might also act directly as preventive and therapeutic agents against some severe diseases. Probiotics promote health via their positive effects on the immune response, stimulation of natural immunity, and modulation of the production of antimicrobial peptides, cytokines, and so on. Whey proteins, a byproduct of cheese production could also have anticarcinogenic, immunostimulatory, antimicrobial, and health-promoting activities such as improving insulin sensitivity and reducing fat deposition. Therefore, milk and dairy products containing probiotics could provide various opportunities in the field of functional foods. Additionally, these functional foods may be important in the human diet and may help improve human health and prevent diseases.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.1-10
• /
• 2020

The present study identified the restrictions on the use of sous-vide products in the Korean HMR market for small and medium-sized manufacturing companies. A detailed literature review revealed that the HMR market in Korea is close to saturation. Notably, the technologically advanced products produced using sous-vide seem to display significant potential to overcome market saturation. The sous-vide method differs from conventional cooking techniques and is characterized by maintenance of food texture along with flavor enhancement. However, due to the unfamiliarity of the manufacturers with this method and the unclear food safety regulations, mass food manufacturing companies do not agree on using this method; hence, sous-vide production is usually undertaken by small/medium sized companies catering primarily through online marketing portals. This study highlights the various restrictions to the implementation of sous-vide production, and discusses several practical implications of sous-vide production that would help users of this technique enter the HMR market.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.433-444
• /
• 2018

This study aims to examine the screening rate of health screening of the disabled by screening the data of disability and health statistics of the National Health Insurance Corporation, to suggest the problems of health examination and the future improvement measures, and also to review the type of health management of the disabled based on the results of health examination interview. As people with limited daily life or social life for a long time because of their physical/psychological disabilities in accordance with the Article2 of , out of 2,479,080 registered people with disabilities on the basis of December 31st 2015, the research subjects were limited to people with disabilities who participated in the health screening and health type for presenting the opinions about policies. In conclusion, regarding the health screening for the disabled, first, it would be necessary to collect the opinions from people with disabilities in order to prepare the health screening service suitable for them. Second, it would be needed to develop the health screening items for each type of disability and severity. Third, it would be necessary to consider the medical equipments and amenities of health examination for the disabled. Fourth, there should be the securement of manpower and education for service providers. Fifth, the mobility right of the disabled should be secured. Regarding the health type of the disabled, first, the expert consultative group in each area should be composed for the health enhancement of the disabled. Second, it would be necessary to screening the current status of health enhancement programs for the disabled and operating facilities. Third, the Central Health Medical Center for the Disabled, shown in the law on the securement of health rights & medical accessibility of the disabled should develop the standardized health enhancement programs for each disability type and severity. After examining the contents of health examination and health type of the disabled, the opinions about policies were suggested. Thus, in the future, there should be more detailed researches based on the tasks suggested by this study, and also the causal relations between health of the disabled and relevant programs should be continuously revealed.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.167-199
• /
• 2005

The following policy implications can be drawn from this study: 1) The Air Pollution Emission Amount Report published by the Ministry of Environment since 1991 classifies industries into 4 sectors, i. e., heating, manufacturing, transportation and power generation. Currently, the usability of report is very low and extra efforts should be given to refine the current statistics and to improve the industrial classification. 2) Big pollution industries are as follows - s7, s17 and s20. The current air pollution control policy for these sectors compared to other sectors are found to be inefficient. This finding should be noted in the implementation of future air pollution policy. 3) s10 and s17 are found to be a big polluting industrial sector and its pollution reduction effect is also significant. 4) The effect of emission coefficient (${\Delta}f$) has the biggest impact on the reduction of emission amount change and the effect of economic growth coefficient (${\Delta}y$) has the biggest impact on the increase of emission volume. The effect of production technology factor (${\Delta}D$) and the effect of the change of the final demand structure (${\Delta}u$) are insignificant in terms of the change of emission volume. 5) Further studies on emission estimation techniques on each industry sector and the economic analysis are required to promote effective enforcement of the total volume control system of air pollutants, the differential management of pollution causing industrial sectors and the integration of environment and economy. 6) Korea's economic growth in 1990 is not pollution-driven in terms of the Barry Commoner's hypothesis, even though the overall industrial structure and the demand structure are not environmentally friendly. It indicates that environmental policies for the improvement of air quality depend mainly on the government initiatives and systematic national level consideration of industrial structures and the development of green technologies are not fully incorporated.

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.84-91
• /
• 2002

Disease forecasting in Korea was first studied in the Department of Fundamental Research, in the Central Agricultural Technology Institute in Suwon in 1947, where the dispersal of air-borne conidia of blast and brown spot pathogens in rice was examined. Disease forecasting system in Korea is operated based on information obtained from 200 main forecasting plots scattered around country (rice 150, economic crops 50) and 1,403 supplementary observational plots (rice 1,050, others 353) maintained by Korean government. Total number of target crops and diseases in both forecasting plots amount to 30 crops and 104 diseases. Disease development in the forecasting plots is examined by two extension agents specialized in disease forecasting, working in the national Agricul-tural Technology Service Center(ATSC) founded in each city and prefecture. The data obtained by the extension agents are transferred to a central organization, Rural Development Administration (RDA) through an internet-web system for analysis in a nation-wide forecasting program, and forwarded far the Central Forecasting Council consisted of 12 members from administration, university, research institution, meteorology station, and mass media to discuss present situation of disease development and subsequent progress. The council issues a forecasting information message, as a result of analysis, that is announced in public via mass media to 245 agencies including ATSC, who informs to local administration, the related agencies and farmers for implementation of disease control activity. However, in future successful performance of plant disease forecasting system is thought to be securing of excellent extension agents specialized in disease forecasting, elevation of their forecasting ability through continuous trainings, and furnishing of prominent forecasting equipments. Researches in plant disease forecasting in Korea have been concentrated on rice blast, where much information is available, but are substan-tially limited in other diseases. Most of the forecasting researches failed to achieve the continuity of researches on specialized topic, ignoring steady improvement towards practical use. Since disease forecasting loses its value without practicality, more efforts are needed to improve the practicality of the forecasting method in both spatial and temporal aspects. Since significance of disease forecasting is directly related to economic profit, further fore-casting researches should be planned and propelled in relation to fungicide spray scheduling or decision-making of control activities.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.170-175
• /
• 1980

A mass production of chestnut necessiates the development of economic long-term storage method. The main objective of this study was to confirm the technical aspect of the chestnut storage method which was developed by two year project and to review the method of commercial application. The chestnut used for the experiments were separated in brine $(5.5{\sim}6.0^{\circ}\:B{\acute{a}}ume)$ into matured and unmatured lots and fumigated with $CS_2$ at a 5 $lb/27\;m^3$ level for $25{\sim}30\;hrs.$ The chestnuts were packed in wooden boxes with sawdust (50% moisture) in the ratio of 1 : 1 by volume. The boxes were stored in the cold room $(1{\pm}1^{\circ}C,\;85{\sim}95%\;RH)$ and the cellar ($0{\sim}10^{\circ}C$, controlled only by circulating night cool air). The results obtained were as follows: 1. Fully matured chestnut could be successfully preserved $8{\sim}9\;months$ at a l0% decay level in the cold room and $4{\sim}5\;months$ months in cellar. 2. Immatured chestnuts wire inferior to the matured in storage stability. At the maximum storage period, its storage life was two months shorter. 3. The heat transfer equation of piled chestnuts with sawdust can be suggested as $T_{\infty}-T_0=(T_{\infty}-T_0){\cdot}10^{-t/320}$ and j and $f_h$ values were 1 and 320 min, respectively. 4. The chestnuts in the package of storage unit had longer shelf life than naked chestnut during the retail distribution at ambient temperature.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.1-25
• /
• 2018

This research performed the empirical test for the effects of learning transfer on perceived usefulness, perceived ease of use, self-efficacy and work environment using 390 employees who have experienced e-learning in domestic and foreign companies. Analyzed the mediating effects of self-efficacy and work environment in addition to direct effect of each factor on learning transfer. The results showed that perceived usefulness and perceived ease-of-use of e-learning learner had a positive(＋) effect on self-efficacy and a positive influence on supervisor and peer support and organizational climate. Self-efficacy showed a positive effect on learning transfer, and supervisor support, peer support and organizational climate had a positive influence on learning transfer as well. Perceived usefulness also had a positive effect on learning transfer. However, perceived ease-of-use had no significant effect on learning transfer. As a result of the mediating effect analysis, self-efficacy and work environment were analyzed to have mediating effects between perceived usefulness, perceived ease of use, and learning transfer. The implications of this study are as follows. First, this study designed a new research model that reflects factors influencing the effect of learning transfer on acceptance of e-learning that is common in corporate education. It has derived a research model of perceived usefulness and perceived ease-of-use, which were used as mediating variables for external characteristics factors, as independent variables, using self-efficacy and work environment as mediating variables, which were studied as external factors. Second, most of the studies on technology acceptance model and learning transfer are conducted in a single country. The reliability was enhanced by testing the study models using different samples from 26 countries. Third, perceived usefulness and ease-of-use in existing studies have been considered as key determinants of acceptance intention and learning transfer. This study explored the mediating effects of learner and environmental factors on the accepted information technology and strengthened and supplemented the path of learning transfer of perceived usefulness and ease-of-use. In addition, based on the sample analysis of various countries used in this study, it is expected that future international comparative studies will be possible.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.191-217
• /
• 2014

The Purpose of this study is to find the effect factors of R&D investment in SMEs which plays an important role in the national economy, and the differences of the effect factors by the type of SMEs. The subject of this study is about 3,400 SMEs mentioned in "The survey of technical statistics on SMEs in 2007" by Korea Federation of Small and Medium Business. The effect factors are related with the size of business, the infrastructure of R&D and the activities of R&D which have been studied by many researchers. The methods of analysis are regression analysis, moderating effect analysis and the software package used is SPSS 12.0. The results of the study are as fallow. First, it was found that unlike in previous studies which show the effect of the elements of business's size, research infrastructure, research activities on R&D investment, one element alone can't be considered for meaningful result but the various elements have effect on R&D investment at the same time. In other words, the number of employees and the sales as the elements of business's size, the ratio of researchers, the technical ability, the ratio of equipment possession and the intellectual properties as the elements of R&D infrastructure, the activity of ideas and joint research as the elements of R&D activities have positive(+) effect, whereas the participation of CEO in the activity of R&D as the elements of R&D activities activity has negative(-) one. The number of employees, the ratio of researchers, and the sales had relatively high influence whereas equipment possession, technical ability, intellectual properties, the participation of CEO in the research, the activity of idea, joint research had relatively low influence. Next, it was also found that there are differences of the effect factors over the types of SMEs. SMEs were classified into 19 types by eight criteria such as start-ups and existing business by business age; small business and medium business by size; manufacturing business and service business by product type;independent business and subcontractor business by dealing type; businesses in the entering, growing, maturing and restructuring stage by growth stage; businesses with low, medium and high technology by technological level; pioneering business and non-pioneering business by industrial type; and businesses with state-of-the-art technology and non-advanced business by the level of business activities. The meaning of this study lies in the fact that it found the various effect factors should be considered at the same time when conducting study on SMEs' R&D investment, and the differences by the type should be acknowledged. This study surpassed the limitations of the previous studies which focused on a couple of factors and types. This study result can also be considered for other studies on achievement, organization, marketing and others. Moreover, it shows that a differential policy by business type is needed when formulating SME policy.