• 제목/요약/키워드: Technology Education

검색결과 13,713건 처리시간 0.034초

통섭교육으로서 공학소양교육의 위상과 과제 (The Place and Problems of Liberal Education for Engineers as Consilience Education)

  • 송성수
    • 공학교육연구
    • /
    • 제15권1호
    • /
    • pp.18-25
    • /
    • 2012
  • This paper examines the academic basis, current status, and future directions of liberal education for engineers as consilience education. After paying attention to the lists of liberal education for engineers including history of technology, technology and society, engineering ethics, economics of technology, management of technology, and technology policy, I found the academic basis of liberal education for engineers in science and technology studies or innovation studies. And then I monitored how liberal education for engineers is managed focusing on the case of Pusan National University and introduced new attempts on liberal education for engineers in other universities in Korea. Lastly, the future directions for the development of liberal education for engineers were suggested such as the strengthening of lecturers' expertise, the reconstruction of engineering education course, and the promotion of relevant academic associations' cooperation.

Study on the Properties of UV Curing Thermal Conductive and Pressure Sensitive Adhesive Using Inorganic Fillers

  • Oh, Ji-Hwan;Choi, Jin-Yeong;Kim, Su-Hwan;Jang, Se-Hoon;Shin, Yoo-Jin;Kim, Dae-Hyun;Yoo, Hwan-Kyu;Cho, Ur Ryong
    • Elastomers and Composites
    • /
    • 제52권1호
    • /
    • pp.22-26
    • /
    • 2017
  • The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

기술과에서의 환경교육 체계화 방안 (A Plan for the Systematization of Environmental Education in Technical Education)

  • 이춘식
    • 한국환경교육학회지:환경교육
    • /
    • 제12권1호
    • /
    • pp.134-149
    • /
    • 1999
  • In this paper an attempt was made to establish a direction in systematizing the technical education with regard to the relation to environmental education. This study was made mainly through literature review concerning the relationship between technology and environment, and thus this study has a purpose of connecting the contents of technical education with environmental education. It will provide referential data for environmental education. The main text of this study dealt with which goal to establish in the technical education from the viewpoint of academical position considering the relationship between technical education and environmental education. Also, it dealt with the organization of contents of environmental education according to the 7th curriculum and, as a result, it reached the following conclusions: In the first place, technology and environmental education which have close relationship with each other should be considered in the developmental aspect. In the second place, technology, in any directions, affects natural environment. In the third place, environmental education should be done by the integrated approach and one of the alternatives can be through SET education including society and culture, environment, and technology all together. In the fouth place, the environmental education should be environmentally sound and developed sustainably so that the technology can be developed along with environment. One example can be found in the ecological architecture. In the fifth place, the environmental education which is a souce of technical education has its necessity in 8 aspects. In the sixth place, according to the 7th curriculum, the following can be the teaching contents which will connect technical education and environmental education: gardening, vegetable raising, planting and trimming, the future techniques, energy and transportation techniques, and so on. In the seventh place, the technical education can have seven goals concerning environment. In the eighth place, the environmental education in the technical education should be considered in the aspect of contents, of teaching and learning, of evaluation, and of the relations with subjects. In the ninth place, should be included as teaching materials of the units of technology textbooks where environment education will be dealt with.

  • PDF

알루미나와 흑연을 포함하는 열전도성 아크릴 점착제의 연구 (A Study on Thermal Conductive Acrylic Pressure Sensitive Adhesive with Alumina and Graphite)

  • 오지환;장선호;유성식;조을룡
    • 반도체디스플레이기술학회지
    • /
    • 제16권3호
    • /
    • pp.93-98
    • /
    • 2017
  • 2-Ethylhexyl acrylate, butyl acrylate, methyl methacrylate, and 2-hydroxyethyl methacrylate were polymerized to synthesize acrylic pressure sensitive adhesive (PSA). Alumina and graphite as a filler were added to acrylic PSA to give thermal conductivity. In case of addition of both graphite and alumina, the thermal conductivity of PSA was increased compared with alumina alone due to enhancement of contact between two fillers followed by increasing thermal path in PSA matrix.

  • PDF

융합기술교육에 대한 산업체 수요조사 : 나노, 바이오, 로봇, 디자인 분야를 중심으로 (Industrial Needs Investigation on Technological Convergence Education: Focused on the Field of Nano-tech, Bio-tech, Robot, and Design)

  • 진성희
    • 공학교육연구
    • /
    • 제20권1호
    • /
    • pp.18-27
    • /
    • 2017
  • This study aims to investigate industry needs for convergence education in the field of nano-technology, bio-technology, robot, and design. Firstly, the area of convergence technology in nano-tech, bio-tech, robot, and design fields was examined through the literature review and case study. The areas were validated by the experts review who consisted of four industry experts and four professors in the relevant fields. Second, a questionnaire was developed for investigating industry's needs on convergence education. The questionnaire consisted of three parts: 1) awareness of necessity for convergence education, 2) the needs for convergence new technology education from the perspective of industry, and 3) opinions on convergence education. The questionnaire was validated by three engineering education experts. Third, the survey was conducted in cooperation with the Sector Council of Industrial Resources. A total of 400 respondents responded to the questionnaires: 98 in the nano-technology field, 74 in the design field, 58 in the robotics field, and 170 in the bio-technology field. Fourth the industry needs for convergence education were analyzed and implications were suggested. The results of this study are expected to provide a guideline for developing convergence education programs in higher education.

국가경쟁력 향상을 위한 정보교육진흥법 제정의 필요성과 입법 방향 (Necessity and Way to Legislate an Information Technology Education Promotion law for Improvement of National Competitiveness)

  • 안성훈
    • 정보교육학회논문지
    • /
    • 제15권2호
    • /
    • pp.209-217
    • /
    • 2011
  • 본 우리나라는 전 세계 IT 생산량의 7%를 차지하는 IT 강국이지만 정보교육을 소홀이 다루고 있어 핵심 원천기술과 SW를 개발할 인력이 부족한 형편이다. 따라서 본 논문에서는 열악한 교육체제를 개선하고 정보교육을 활성화하기 위한 "정보교육진흥법"의 제정 방안을 제안하였다. 그리고 이 법에서 담아야할 내용으로 체계적이고 안정적인 정보교육의 활성화를 위한 국가와 지방자치단체의 "정보교육종합계획 수립"에 대한 책무, 정보교육의 활성화를 추진하기 위한 위원회 구성, 학교교육과 사회교육에서의 정보교육 활성화 방안, 정보활용능력인증제 도입 등에 대한 구체적인 방안을 제시하였다. 따라서 본 논문을 통해 도출되는 연구 결과는 침체되어 있는 우리나라의 정보교육을 활성화할 수 있는 "정보교육진흥법" 제정의 방향을 제시해 주는 지표가 될 수 있을 것으로 기대한다.

  • PDF

LED.신광원 조명기술의 동향과 특성

  • 황명근;신상욱;이세현;노재엽;최석준;서정진;이정근;양승용
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2009년도 춘계학술대회 논문집
    • /
    • pp.201-203
    • /
    • 2009
  • 본 논문에서는 LED(light emitting diode)를 사용한 일반 조명에서부터 자동차 조명에 대한 LED, CNT(carbon nano-tube), OLED조명의 융합기술 현황에 대하여 살펴보았다. 정부의 15/30보급정책의 일환인 LED조명 시범보급사업(부산 및 대전 지하철역사, 김대중 컨벤션센터, 대구 및 대전 우체국 등)과 한국산업규격(KS C 7651-3)의 제정 등으로 LED 응용 조명은 시장에서의 사용으로 기존 조명기기와의 경쟁력이 예상된다.

  • PDF

The detection efficiency study of NaI(Tl) scintillation detector with the different numbers of SiPMs

  • Wang, Bao;Zhang, Xiongjie;Wang, Qingshan;Wang, Dongyang;Li, Dong;Xiahou, Mingdong;Zhou, Pengfei;Ye, Hao;Hu, Bin;Zhang, Lijiao
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2564-2571
    • /
    • 2022
  • SiPMs are generally coupled into whole columns in gamma energy spectrum measurement, but the relationship between the distribution of whole SiPM columns and the energy resolution of the measured energy spectra is rarely reported. In this work, ∅ 3 × 3 inch NaI scintillator is placed on an 8 × 8 SiPM array, and the energy resolution of the 137Cs peak at 662 keV corresponding to the γ-ray is selected as a reference. Each SiPM is switched to explore the influence of the number of SiPM arrays, distribution position, and reflective layer on the energy resolution of SiPMs. Results show that without coupling, the energy resolution is greatly improved when the number of SiPMs ranges from 4 to 32. However, after 32 slices (the area covered by SiPMs relative to the scintillator reaches 25.9%), the improvement in energy resolution and total pulse count is not obvious. In addition, the position of SiPMs relative to the scintillator does not exert much impact on the energy resolution. Results also indicate that by adding a reflective film (ESR), the energy resolution of the tested group increases by 10.38% on average. This work can provide a reference for the design and application of miniaturized SiPM gamma spectrometers.

ARD기반의 ICT체험 교육콘텐츠 효용성 개선 및 활성화 구현 (Achieving the improvement of efficiency and vitalization of ARD-based ICT experiential education contents)

  • 정희형;김경훈
    • 한국과학예술포럼
    • /
    • 제19권
    • /
    • pp.623-633
    • /
    • 2015
  • Use of technology through utilization of ICT (Information Communication Technology) in field study area is rapidly increasing. Thus, when applying ICT to experiential education, apart from experiential education contents in simple form, the demand for new high quality contents is increasing considering change in education paradigm focusing on creativity. As a result, high quality interactive experiential education content for developing self-directed future talents is required. As a result of this, the development of ARD-based ICT experiential education content system that enhances learning effect of students by integrating ARD-based (Augmented Reality Display) ICT and experiential education to promote existence and immersion is being tested. This paper aims to improve efficacy and achieve vitalization through case analysis of AR-based ICT experiential education content. As a result of case analysis, the composition of content for improving education content included 1) constant securing and strengthening of experiential education content, 2) necessity for development of participating education content by diverse age groups, 3) development of differentiated ICT experiential education content, and 4) securing professional manpower and development of content in connection with education process. Therefore, with the efficacy of ARD-based ICT experiential education content, this study can first, enhance bond between students, second, enable self-directed learning, third, increase practical understanding in contents that were difficult to control by textbook contents, and fourth, increase interest and immersion in learning. Therefore, the contents on new converging technology that can maximize the development of constant content and cooperation between ICT technology and pedagogy for educating creativity and autonomy of ICT experiential education content.

Exploring the Exemplary STEAM Education in the U.S. as a Practical Educational Framework for Korea

  • Yakman, Georgette;Lee, Hyonyong
    • 한국과학교육학회지
    • /
    • 제32권6호
    • /
    • pp.1072-1086
    • /
    • 2012
  • Science, Technology, Engineering, and Mathematics (STEM) education in the U.S. has been identified as a significant national reform in K-16 education and curriculum in order to prepare students for the global economy of the 21st century. Korea has been facing very similar challenges to improve science, technology and mathematics education, in particular, the affective aspect of learning science and mathematics. Science, Technology, Engineering, Arts, and Mathematics (STEAM) education has become a crucial issue in Korean education system. The major purpose of this exploratory study is to inform the exemplary framework of STEAM education in the U.S. for Korea and to provide descriptive and analytical accounts on STEAM teaching and learning as an innovative integrated convergence education. This study integrates the outcomes of research papers on STEM education and recent literature. It employs content analysis methodology qualitatively by analyzing and synthesizing the findings, conclusions, discussions, and recommendations of accumulated research works related to STEM/STEAM education. This study will help gain a stronger sense of the STEAM framework and will guide to develop the educational programs for Korea.