• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.43-44
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.41-42
• /
• 2005

• 정보처리학회논문지D
• /
• 제13D권1호
• /
• pp.87-96
• /
• 2006

본 논문은 프로젝트 환경과 특성을 고려하여, 소프트웨어 개발 경로를 커스터마이징 하는 방법을 설계한 것이다. 개발 경로 선정 기준은 ISO/IEC TR 15721 Information Technology Guide for ISO/IEC 12207(Software Life Cycle Processes), ISO/IEC 15504 Information technology - Process assessment의 프로세스 내용에 기반 한 10개의 영역 특성이다. 10개의 영역 특성은 프로젝트 환경과 특성을 반영한 것이며, 프로젝트 개발 경로 선정 항목들을 정의한다. 프로젝트 환경과 특성 항목인 10개 영역 특성 항목을 이용하여 소프트웨어 개발 프로세스를 선정하는 알고리즘을 제시한다. 본 논문에서 제안한 소프트웨어 개발 경로를 커스터마이징 하는 방법을 평가하기 위하여 소프트웨어 개발 경로를 커스터마이징 하는 방법을 반영한 개발 경로 선정 시스템을 가지고 웹 기반 시스템 개발 프로젝트를 적용한다. 그러나 입증된 수작업 프로젝트 경로 프로세스와 시스템에서 출력된 프로젝트 경로 프로세스가 차이가 난다 차이가 나는 주원인은 산출물이 서로 합쳐졌거나, 명칭이 바뀌었기 때문이다. 효과로는 소프트웨어 개발 프로젝트 환경과 특성에 적합한 경로 프로세스를 용이하게 선정한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.870-875
• /
• 2004

In Japan, a long-waited civil aero engine development project has been recently started by the New Energy and Industrial Technology Development Organization, NEDO. “High efficiency,” “environmentally friendliness” and “low-cost” are the key words of the target engine. The target engine is of l0000-lb thrust with project consists of three phases: Feasibility studies and market research in the first phase, FY 2003, engine component development in the second phase, FY 2004-2006, and core and full engine demonstrators in the third phase, FY 2007-2009. In league with this government/industry joint funded project, Institute of Space Technology and Aeronautics, JAXA, has initiated “Clean Engine Technology” project.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.789-796
• /
• 2016

In the Core Technology R&D of the defence area, the development of the related core element technology could be the foundation to develop advanced weapon system in the future. But it might make various problems if you can not accurately define the TRL of the element technology. In other words, if the technology is not sufficiently mature and then the project starts, it might require an increase in the development period and additional cost. Finally the system will be in an incomplete state and result in user dissatisfaction and the project failure. Therefore it is a very important task to properly assess the TRL for a successful project. In this study, We propose the method for risk management of core technology R&D project of the defence area using the QFD process with degree of difficulty and technology readiness level. It is also presented the process to determine the risk level using TRL and Degree of difficulty. Finally We apply this method to UGV system for verifying the result of this study.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.142-155
• /
• 1997

To successfully carry out large scale research projects while su, pp.rting quality assurance of research output, effective and systematic management through utilization of resources such as manpower, time and cost as well as engineering techniques such as component technology and design methodology is required. It is necessary to establish development methodology to su, pp.rt quality assurance. The development methodology covers the contents and procedures of the project, such as division of the project into independently executable units, allocation of resources including researchers, component technology, related know-how and equipment, deployment of research units and integration of the project at the end. In this paper we present systematic development methodology for quality assurance in large scale software development projects by analyzing the contents of the methodology a, pp.ied to the Gigabit Information-processing And Networking Technology development project(GIALT).

• 전자통신동향분석
• /
• 제32권6호
• /
• pp.105-115
• /
• 2017

This paper describes a project - based quality management model that identifies development technologies and codes while at the same time verifying the ability to implement processes that are essential in R & D projects. In order to verify the process implemented in the R & D project implementation, there are review, checking points, and evaluating methods the process performance levels for five processes such as defining requirements which is the beginning stage of system development, testing process which is the completion stage of system development, and project management and peer review process for project management and support in the proposed project-based quality management model. For development technology and code validation, the model included the documented test cases for each requirement by the developer in the requirements definition stage, debugging and testing in the design and implementation stages, static analysis and open source licence verification procedure, and system environment. After applying the model in SW development R&D project for evaluating the process performance, and verifying the development technology and the code, the developers responded that the improvement in the development technique and the code, and upgrade of process performance level for project are more than 10%.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.335-339
• /
• 2011

The unique characteristics of the construction industry - such as the fragmentation of its processes, varied scope of works and diversity of its participants - are contributory factors to poor project performance. Several issues are unresolved due to the lack of a comprehensive technique to measure project outcomes including: inefficient decision making, insufficient communication, uncertain site conditions, a continuously changing environment, inharmonious working relationships, mismatched objectives within the project team and a blame culture. One approach to overcoming these problems appears to be to measure performance by gauging contractor satisfaction (Co-S) levels, but this has not been widely investigated as yet. Additionally, the key Co-S dimensions at the project level are still not fully identified. This paper concerns a study of satisfaction dimensions, primarily by a postal questionnaire survey of construction contractors registered by the Malaysian Construction Industry Development Board (CIDB). Eight satisfaction dimensions are identified that are significantly and substantially relate to these contractors - comprising: project cost performance, schedule performance, product performance, design satisfaction, site safety, project profitability, business performance and relationships between participants. -Each of these dimensions is accorded different priority levels of satisfaction by different contractors. The output of this study will be useful in raising the awareness and understanding of project teams regarding contractors' needs, mutual objectives and open communication to help to deliver a successful project.

• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.126-132
• /
• 2013

In this paper, efficiencies of core technology development projects, conducted by Ministry of Trade, Industry and Energy, are compared. In the process, DEA (Data Envelopment Analysis) is utilized as a main technique for comparing efficiencies. For DEA, input oriented BCC Model is adopted with government grant, recipient expenditure, the number of participating institutions, and project duration as input factors, and the number of patents, the number of papers, and occurred sales as output factors. As a result, next generation mobile communication project turns out to be the most efficient project of all. Therefore, next generation mobile communication project should be benchmarked for the other projects to follow. However, these results should be used only for reference data since every project has a different objective and, of course, is run under a different environment.

• 한국IT서비스학회지
• /
• 제5권2호
• /
• pp.179-188
• /
• 2006

MDD/MDA which recently raising its head is technology that increase software development productivity through automatic transformation form higer abstract model into lower abstract model, or from model to code. This paper analyzes the effect on productivity by measuring Function Point per MM(man-month) in a software development project which performed in CBD methodology, and introduce the method of applying MDD/MDA technology in the project.