• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.44.3-44.3
• /
• 2009

The MIRIS (Multi-purpose IR Imaging System), as the main payload of Science and Technology Satellite-3 (STSAT-3), is being developed by KASI in collaboration with several institutes for wide-field space observation in near IR wavelength. The Engineering Qualification Model (EQM) of MIRIS has been designed and fabricated in the laboratory. The system performance tests have been made including opto-mechanics, vibration test, thermal-vacuum environmental test and passive cooling test down to 200K. Most of the performance test results were satisfied with system requirements. The results of MIRIS performance tests have been presented at Critical Design Review (CDR) on September 2009. Several revisions were also recommended for Flight Model (FM) design, and detailed plan to develop FM of MIRIS is discussed in this paper.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.72-77
• /
• 2011

Spectrum sensing is a critical functionality of CR network; it allow secondary user to detect spectral holes and to opportunistically use under-utilized frequency bands without causing harmful interference to primary use. Recently, wideband service has been increase for processing abundance of data traffic. So CR network needs a realizable implementation design of spectrum sensing for wideband. To get high resolution performance of wideband sensing must precede algorithm processing for reliability signal detection. By the way, the performance of spectrum sensing can be degraded due to fading and shadowing. In order to overcome this problem, we propose system model of wideband sensing scheme on energy detected collaborative technique. we divide wideband into narrowbands and use narrowbands to detect signal excepting some narrowbands including bad channel through the CSI. And we simulate and analyze in terms of detection probability with various SNR.

• Smart Structures and Systems
• /
• v.24 no.1
• /
• pp.53-65
• /
• 2019

Misaligned wind-wave and seismic loading render offshore wind turbines suffering from excessive bi-directional vibration. However, most of existing research in this field focused on unidirectional vibration mitigation, which is insufficient for research and real application. Based on the authors' previous work (Sun and Jahangiri 2018), the present study uses a three dimensional pendulum tuned mass damper (3d-PTMD) to mitigate the nacelle structural response in the fore-aft and side-side directions under wind, wave and near-fault ground motions. An analytical model of the offshore wind turbine coupled with the 3d-PTMD is established wherein the interaction between the blades and the tower is modelled. Aerodynamic loading is computed using the Blade Element Momentum (BEM) method where the Prandtl's tip loss factor and the Glauert correction are considered. Wave loading is computed using Morison equation in collaboration with the strip theory. Performance of the 3d-PTMD is examined on a National Renewable Energy Lab (NREL) monopile 5 MW baseline wind turbine under misaligned wind-wave and near-fault ground motions. The robustness of the mitigation performance of the 3d-PTMD under system variations is studied. Dual linear TMDs are used for comparison. Research results show that the 3d-PTMD responds more rapidly and provides better mitigation of the bi-directional response caused by misaligned wind, wave and near-fault ground motions. Under system variations, the 3d-PTMD is found to be more robust than the dual linear TMDs to overcome the detuning effect. Moreover, the 3d-PTMD with a mass ratio of 2% can mitigate the short-term fatigue damage of the offshore wind turbine tower by up to 90%.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.343-352
• /
• 2020

Modular integrated construction (MiC) is an innovative construction method where components of a building are manufactured in an offsite factory, trucked to the job site in sections, set in place with cranes, and assembled together to form a whole building. Where circumstances merit, favorable conditions exist and implemented effectively; MiC improves project performance. However, several key factors need to converge during implementation to realize the full benefits of MiC. Thus, a thorough understanding of the factors which are critical to the success of MiC projects is imperative. Drawing on a systematic review of 47 empirical studies, this research identified 25 key success factors (KSFs) for MiC projects. Of these, the five topmost cited KSFs for MiC projects include effective working collaboration and communication among project participants; standardization, optimization, automation and benchmarking of best practices; effective supply chain management; early design freeze and completion; and efficient procurement method and contracting. The study further proposed a conceptual model of the KSFs, highlighting the interdependences of people, processes, and technology-related KSFs for the effective accomplishment of MiC projects. The set of KSFs is practically relevant as they constitute a checklist of items for management to address and deal with during the planning and execution of MiC projects. They also provide a useful basis for future empirical studies tailored towards measuring the performance and success of MiC projects. MiC project participants and stakeholders will find this research useful in reducing failure risks and achieving more desired performance outcomes. One potential impact of the study is that it may inform, guide, and improve the successful implementation of MiC projects in the construction industry. However, the rigor of the analysis and relative importance ranking of the KSFs were limited due to the absence of data.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.1
• /
• pp.365-392
• /
• 2021

In order to assess the state of library and information science (LIS) research in Korea, the study analyzed bibliometric data of papers published in past 18 years in Korea Citation Index (KCI) and Social Science Citation Index (SSCI) journals. The analysis of study data, which consisted of 6,301 KCI journal papers with 26,474 citations and 86,727 SSCI journal papers with 1,196,961 citations from 2002 to 2020, involved comparison of research productivity and impact, collaboration trends, and key areas of research between domestic and international LIS scholars with normalizations by units of analysis for size differences. Even with size normalization, the study found a marked difference in citation patterns between domestic and international LIS research. Korean LIS authors were twice as productive as international LIS authors but a little over a half as impactful. The results also showed a much higher level of skewness in international research, where a fraction of top authors, institutions, and journals received a lion's share of citations. The trend of increasing co-authorship was much more pronounced among international publication, where the recent popularity of larger collaboration groups suggests multi-disciplinary and increasingly complex nature of modern LIS research in the world stage. The keyword analysis revealed a much more diverse subject area in international than domestic LIS research with a recent shift towards technology, such as big data, blockchain, and altmetrics. Keywords in SSCI journals also exhibited a less connection between popularity and impact than KCI keywords, where popular keywords did not necessarily correspond to impactful keywords.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.145-175
• /
• 2011

The purpose of this research investigates the determinant factors of the joint technology development project performance between SMEs and universities. Reviewing existing papers we could categorize independent variables into three groups of partner characteristics, process management variables and relationship characteristics between partners. Three measures of satisfaction with the cooperation result, the intention of continuing relationship and the utilization of developed technology and product were used as dependent variable considering that we studied the joint projects of SMEs' involvement, short period and small scale. The data was collected by questionnaire survey mailed to the 1082 SMEs and university professors which executed the joint projects sponsored by Small Business Administration in 2009. We received 200 responses from SMEs, and 305 cases from professors among which 55 responses of each partner were on the same project. We analyzed the data sets individually, data of SMEs and that of universities with multiple regression analysis technique and also analyzed the common responses of 55 projects. Analysis results of the data from SMEs indicated that partners' expertise, facilities and equipment, communications, strategic importance, and trust were significant variables for the project performance. Analysis results of the data from universities showed that previous links, definition of objectives, strategic importance, trust and commitment were significant variables. Analysis results of combined data of 55 projects from SMEs and universities indicated that facilities and equipment, project management proficiency and commitment were significant variables.

• Korean Institute of Interior Design Journal
• /
• v.26 no.2
• /
• pp.64-71
• /
• 2017

The purpose of this study is to investigate the potential of immersive environments in the design domain by analyzing students' design process in immersive environments from cognitive and experiential aspects. To do this, we reviewed major concepts and theories such as users' immersion, participation, presence, and awareness and developed a comprehensive conceptual framework of immersive shared environments. In three different visualization systems of HIVE, teams consisting two students were assigned to design tasks and the design process was analyzed by a customized framework. The characteristics of the immersive environment related to the performance of the design task were different from those of the previous studies. The perception of the relationship between the spaces is very important, and the perception of the surrounding objects is interested in the shape or the material such as whether the object is flat or inclined. Also, it is found that the multi-technology of immersive environments is very useful for creative collaboration. In the future, a more comprehensive analysis of the effects on design decisions in a more diverse visual interface condition and the effects on more diverse design areas should be added.

• Korea Journal of Hospital Management
• /
• v.17 no.4
• /
• pp.167-187
• /
• 2012

Organizational growth is achieved through the process of finding opportunities in the environment and establishing a business model with internal and external resources. Bestian Hospital, which primarily focuses on saving the lives of patients with severe burns, has enlarged its business domain through deep understanding of burn patients' problems, including pain and complications during treatments, long-term treatments, skin reconstruction, and so on. Now Bestian is accelerating research for development of antipyretics and cosmetics for burn patients. The success of Bestian has been due to utilization of human and material resources that are essential to performance in the medical field. Also, Bestian properly used a management service organization(MSO) model and constructed an information technology(IT) system for supporting its businesses. However, previous successes do not guarantee continued success. Bestian is entering a new domain with different challenges than it has experienced so far, and how it deals with these challenges will decide its future.

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.505-534
• /
• 2006

Ensuring sufficient supplies of clean, economic and acceptable energy is a critical global challenge for the 21st century. There seems little alternative to a greatly expanded role for nuclear power, but implementation of this option will depend on ensuring that all resulting wastes can be disposed of safely. Although there is a consensus on the fundamental feasibility of such disposal by experts in the field, concepts have to be developed to make them more practical to implement and, in particular, more acceptable to key stakeholders. By considering global trends and using illustrative examples from Japan, key areas for future R&D are identified and potential areas where the synergies of international collaboration would be beneficial are highlighted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.573-574
• /
• 2016

Before the Machine Socialization System used to connected between server and router. However, the data flow increases due to the poor performance of the router increased traffic, as a result, the loss of data when the problem occurred Collaboration between devices increases that have been interrupted. This action moves the server connected to the router is required to solve these problems. In this paper, by utilizing the cloud server to reduce bottlenecks proposed a system that can reduce the loss of data during cooperation between devices. In addition, by dividing the management unit and the sensor using the virtualization technology, we designed a system that can efficiently make use of the resource.