• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.681-688
• /
• 2009

철도교량은 일반적으로 공용기간동안 진동과 충격에 의한 구조적 영향을 받는다. 이와 같은 이유로 내하력 증진을 위한 보강성능 검토 시 철도교에 작용하는 외부하중에 효율적으로 저항할 수 있는 보강성능이 요구된다. 이 연구에서는 철도교의 공용 중 진동 및 충격하중에 효율적으로 저항할 수 있는 보강공법으로써 NSM 보강공법을 제안하였다. 이는 기존 탄소섬유외부부착 공법에 비해 부착성능 및 보강성능이 우수한 공법이다. NSM 보강공법은 현재 다양한 실험적 연구들이 진행되고 있으나, 실교량으로의 범용적인 적용을 위해서는 보강설계에 필요한 합리적인 보강비 산정이 필수적이다. 이를 위해, 이 연구에서는 재료적 및 기하학적 불확실성이 반영된 확률 신뢰도기반 NSM 보강비 산정방법을 제안하여 임계보강비를 산정하고자 한다. 이를 위해, Monte Carlo Simulation(MCS) 기법으로 도출된 재료 및 단면치수에 대한 불확실성 특성을 내부저항모멘트 설계식에 반영하여, 외부활하중의 불확실성 특성이 반영된 외부하중모멘트에 대한 안전도 평가를 수행하였으며, 목표신뢰성지수 3.5를 만족할 수 있도록 하는 CFRP 플레이트의 임계보강비를 산출하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권1호
• /
• pp.111-119
• /
• 2020

Objective: This study was conducted to examine the effects of a mixture of pinecone oil, garlic, and brown seaweed extracts (PGBE) on milk production traits as well as physiological and ethological parameters in Holstein cows during the summer season (24 May to 03 July 2015, Korea). Methods: Among the extract combinations tested, we found that the level of 2,2'-azino-bis (3-ethylberzothiazoline-6-sulphonic acid) cation radical scavenging activity of the 0.16% PBGE complex at ratio of 1:1:1 (vol/vol) was comparable to that of the control (ascorbic acid; 1 mg/mL). Additionally, the PBGE complex reduced lipopolysaccharide-induced COX-2 expression in bovine mammary epithelial cells. Based on these findings, 40 lactating Holstein cows were used to measure the effects of PBGE complex at ratio of 1:1:1 (vol/vol) on milk production, immune response, metabolites, and behavior patterns by dividing the cows into two groups fed diets containing PGBE complex (n = 20; 0.016%/kg feed dry matter basis) or not containing PGBE complex (control, n = 20) for 40 d. Results: Results showed that PGBE complex did not influence milk composition, eating and ear surface temperature patterns, immune response, or metabolic parameters but promoted average milk yield throughout the experimental period. Additionally, a tendency of higher total antioxidant capacity and glutathione in the PGBE group was observed compared to the those in the control. When the temperature-humidity index (THI) exceeded 72 (average THI = 73.8), PGBE complex-fed cows experiencing heat stress showed increased milk yield and a tendency of increased rumination compared to the control. Conclusion: We suggest that incorporation of a combined mixture of 0.016% PGBE (1:1:1 ratio, vol/vol) to diet has the potential to improve milk yield and health status of cows under mild to moderate heat stress, denoting that it might be useful as an alternative anti-stressor in the diet of dairy cows under hot conditions.

• 한국식품과학회지
• /
• 제28권6호
• /
• pp.1078-1083
• /
• 1996

쌀보리를 정맥기를 사용하여 도정한 정맥에 대해 제분기의 종류를 달리하여 제분한 결과 보리가루는 입도 분포에서 차이를 나타내 Jet mill로 제분한 보리가루의 입자 크기가 가장 작았으며 그 다음으로 Pin mill과 Cyclotec sample mill에 의한 입자 크기가 작았고 Ball mill과 Fitz mill에 의한 보리가루가 가장 큰 것으로 나타났다. 보리가루는 입자크기가 작을수록 색이 밝고 전분 손상도가 높은 경향을 나타냈다. 보리가루의 표면구조는 크고 작은 전분 입자, 주름진 세포벽 물질 등으로 관찰되었으며 가루 입자의 형태 및 크기가 제분기의 종류에 따라 다소 차이를 나타냈다. 보리가루는 손상된 전분의 양이 많을수록 높은 수분흡수지수 및 보수력을 나타냈으며 수분용해도지수 역시 증가하는 경향을 보여주었다. 보리가루의 호화 특성을 측정한 결과 보리가루의 점도는 입자가 크게 분쇄된 Fitz mill에 의한 보리가루에서 가장 낮았으며 Pin mill과 Cyclotec mill에서 높게 나타났다. 아주 미세하게 분쇄된 Jet mill은 호화가 빨리 진행된 반면 점도의 상승은 크지 않아 지나친 전분의 손상은 점도를 떨어뜨리는 것으로 판단되었다.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1399-1404
• /
• 2004

컴퓨터의 발전과 정보통신기술의 발달은 멀티미디어 기술 확산과 대용량의 멀티미디어 동영상데이터 사용을 증가시켰다. 동영상데이터는 전체적인 데이터를 파악하고, 원하는 동영상을 바로 재생 가능할 뿐만 아니라 동영상 데이터의 정보가 된 리스트제공이 필요하다. 그리고 효과적인 동영상 검색을 위해서는 동영상 데이터의 색인과정이 필수적이며 꼭 필요한 기술이다. 따라서 본 연구는 동영상 데이터 내용기반 색인에 기초가 될 프레임의 컷 검출의 효과적인 방법을 제안한다. 제안된 방법은 동영상데이터 각각의 프레임을 대각선 방향으로 나누어 일정한 픽셀 색상 정보 값을 추출하여 각각 프레임에서 추출된 칼라색상의 픽셀값은 A(i, ij행렬로 j는 프레임 수, i는 프레임의 영상 높이로 저장한다. 저장되어진 픽셀값은 MSE(Mean Square Error)을 이용하여 프레임간의 특정 값의 차이를 임계 값보다 클 경우 빠르고 정확하게 컷을 검출하였다. 프레임 컷 검출에 대한 실험을 포괄적으로 하기 위해 여러 종류의 동영상 데이터를 실험 대상으로 하여 컷 검출 시스템의 성능을 비교 분석하였다.

• 기술혁신연구
• /
• 제11권1호
• /
• pp.147-176
• /
• 2003

This Paper Presents a new measurement technique to derive the level of BSRC (Basic Science and Research Capacity) index by use of the factor analysis which is extended with the assumption of the standard normal probability distribution of the selected explanatory variables. The new measurement method is used to forecast the gap of Korea's BSRC level compared with those of major OECD countries in terms of time lag and to make their international comparison during the time period of 1981∼1999, based on the assumption that the BSRC progress function of each country takes the form of the logistic curve. The US BSRC index is estimated to be 0.9878 in 1981, 0.9996 in 1990 and 0.99991 in 1999, taking the 1st place. The US BSRC level has been consistently the top among the 16 selected variables, followed by Japan, Germany, France and the United Kingdom, in order. Korea's BSRC is estimated to be 0.2293 in 1981, taking the lowest place among the 16 OECD countries. However, Korea's BSRC indices are estimated to have been increased to 0.3216 (in 1990) and 0.44652 (in 1999) respectively, taking 10th place. Meanwhile, Korea's BSRC level in 1999 (0.44652) is estimated to reach those of the US and Japan in 2233 and 2101, respectively. This means that Korea falls 234 years behind USA and 102 years behind Japan, respectively. Korea is also estimated to lag 34 years behind Germany, 16 years behind France and the UK, 15 years behind Sweden, 11 years behind Canada, 7 years behind Finland, and 5 years behind the Netherlands. For the period of 1981∼1999, the BSRC development speed of the US is estimated to be 0.29700. Its rank is the top among the selected OECD countries, followed by Japan (0.12800), Korea (0.04443), and Germany (0.04029). the US BSRC development speed (0.2970) is estimated to be 2.3 times higher than that of Japan (0.1280), and 6.7 times higher than that of Korea. German BSRC development speed (0.04029) is estimated to be fastest in Europe, but it is 7.4 times slower than that of the US. The estimated BSRC development speeds of Belgium, Finland, Italy, Denmark and the UK stand between 0.01 and 0.02, which are very slow. Particularly, the BSRC development speed of Spain is estimated to be minus 0.0065, staying at the almost same level of BSRC over time (1981 ∼ 1999). Since Korea shows BSRC development speed much slower than those of the US and Japan but relative]y faster than those of other countries, the gaps in BSRC level between Korea and the other countries may get considerably narrower or even Korea will surpass possibly several countries in BSRC level, as time goes by. Korea's BSRC level had taken 10th place till 1993. However, it is estimated to be 6th place in 2010 by catching up the UK, Sweden, Finland and Holland, and 4th place in 2020 by catching up France and Canada. The empirical results are consistent with OECD (2001a)'s computation that Korea had the highest R&D expenditures growth during 1991∼1999 among all OECD countries ; and the value-added of ICT industries in total business sectors value added is 12% in Korea, but only 8% in Japan. And OECD (2001b) observed that Korea, together with the US, Sweden, and Finland, are already the four most knowledge-based countries. Hence, the rank of the knowledge-based country was measured by investment in knowledge which is defined as public and private spending on higher education, expenditures on R&D and investment in software.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8128-8139
• /
• 2015

최근 구조물 기초 분야에 대한 한계상태설계법이 국제적인 기술표준으로 요구됨에 따라 연구기반이 미약한 연약지반 개량공법에 대한 하중저항계수설계법 개발의 필요성이 대두되었다. 본 연구는 신뢰성 분석을 통해 항타강관말뚝의 목표신뢰성지수 및 저항계수를 산정하여 기초 구조물에 대한 LRFD code를 개발하고자 하였다. 프로그램의 검증을 위해 광양지역 16개의 항타말뚝 재하시험 결과와 2008년 한국건설기술연구원에서 이용된 57개의 항타말뚝 재하시험 결과를 취합하였다. 구조물기초설계기준에서 제안하고 있는 두가지 정역학적 설계공식에 대해서 대표 측정지지력과 설계지지력을 비교함으로써 저항편향계수를 평가하였고, 저항편향계수의 통계특성을 이용하여 일차신뢰도법 및 몬테카를로 실뮬레이션에 의한 신뢰성 분석을 실시하였다. 그 결과, 항타강관말뚝의 목표 신뢰성지수 2.0, 2.33, 2.5에 대해서 선단부 N치 50이하인 경우 두 지지력 공식의 저항계수는 각각 0.611~0.684, 0.821~0.537, 선단부 N치 50이상인 경우 각각 0.608~0.545, 0.749~0.643으로 제안되었다. 본 연구결과는 향후 다양한 기초구조물 및 지반구조물의 하중저항계수설계법 개발을 위한 자료로서 그 활용성이 있을 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1641-1648
• /
• 2017

Many researchers had examined the validity of using the high-to-low ratio between two fixed frequency band amplitudes (H/L-FFB) from the surface electromyography of a face and body as the first spectral index to assess muscle fatigue. Despite these studies, the disadvantage of this index is the lack of a criterion for choosing the optimal border frequency. We tested the potential of using the high-to-low ratio between two signal spectral moments (H/L-SSM), without fixed border frequencies, to evaluate muscle fatigue and predict endurance time ($T_{end}$), which was determined when the subject was exhausted and could no longer follow the fixed contraction cycle. Ten healthy participants performed five sets of voluntary isotonic contractions until they could only produce 10% and 20% of their maximum voluntary contraction (MVC). The $T_{end}$ values for all participants were $138{\pm}35s$ at 10% MVC and $69{\pm}20s$ at 20% MVC. Changes in conventional spectral indices, such as the mean power frequency (MPF), Dimitrov spectral index (DSI), H/L-FFB, and H/L-SSM, were extracted from surface EMG signals and were monitored using the initial slope computed every 10% of $T_{end}$ as a statistical indicator and compared as a predictor of $T_{end}$. Significant correlations were found between $T_{end}$ and the initial H/L-SSM slope as computed over 30% of $T_{end}$. In conclusion, initial H/L-SSM slope can be used to describe changes in the spectral content of surface EMG signals and can be employed as a good predictor of $T_{end}$ compared to that of conventional spectral indices.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.471-483
• /
• 2014

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

• 한국자원식물학회지
• /
• 제31권3호
• /
• pp.237-253
• /
• 2018

The adzuki bean (Vigna angularis L.) is a red-grained legume that has a number of essential nutrients and is used in traditional dishes in Asia. Adzuki bean industrial by-products are also a potential low-cost source of some unique bioactive polyphenols. Hence, here, the authors aimed to perform a comparative study of the phytochemical profiles of the leaves and seeds of the adzuki bean and compare their antioxidant, ${\alpha}$-glucosidase inhibition, and tyrosinase inhibition activity. The authors assessed antioxidant activity by DPPH, ABTS, FRAP, PR, TPC, and SOD assays, which showed wide variation, respectively. From the relative antioxidant capacity index results, 10 adzuki bean landraces were selected to compare for phytochemicals and bioactivity using leaf and seed extracts. Antioxidant, ${\alpha}$-glucosidase inhibition, and tyrosinase inhibition activity in the leaf extracts were higher than in the seed extracts, and there were more flavonols and isoflavones in the leaf extracts than in the seed extracts. This study demonstrated that adzuki bean leaf extracts could be a new natural antioxidant or antidiabetic agent and a skin whitener and can also be used in industrial applications.

• 한국식품과학회지
• /
• 제49권5호
• /
• pp.463-468
• /
• 2017

화선찰 백미로부터 분리한 찹쌀 녹말을 옥테닐 석시닐 무수물(OSA)로 변성처리 하여 유화제로 사용하기 위해 OSA 1, 2, 3%를 가하여(pH 8.5, 6시간) 변성녹말을 제조하고 이화학 및 호화특성과 유화 안정성을 조사하였다. OSA 1, 2와 3%로 제조한 변성 찹쌀녹말의 치환도는 각각 0.0062, 0.0182 및 0.0214이었다. FT-IR로 분석한 모든 OSA 변성 녹말은 모두 1724와 $1572cm^{-1}$에서 약한 피크를 보였으며 치환도가 클수록 $3300cm^{-1}$의 피크는 감소하였다. X-선 회절도에 의한 결정형은 생 녹말과 같은 A 형이었고 입자 크기는 유사하였다. OSA 변성녹말은 피크 점성이 농도에 따라 증가하였고 초기호화온도와 피크온도 및 엔탈피는 감소하였다. OSA 변성녹말의 크리밍 지수는 OSA농도가 증가함에 따라 감소하였다. 위 결과로부터 OSA변성 찹쌀녹말의 유화 안정성은 OSA 농도에 따라 증가함을 확인하였다.