• 제목/요약/키워드: Technical and Content Components

검색결과 61건 처리시간 0.024초

효율적인 기술문서화를 위한 콘텐트 재사용성 접근방법 (Approaching Content Reuse for Efficient Technical Documentation)

  • 구홍서
    • 한국산업정보학회논문지
    • /
    • 제15권5호
    • /
    • pp.113-118
    • /
    • 2010
  • 기업에서 수백 또는 수천 개의 문서를 작업해야 하는 다수의 프로젝트를 수행할 때, 여러 개의 문서에 포함된 동일한 콘텐트나 본질적으로 유사한 콘텐트를 변경하지 않아도 되기 때문에 콘텐트의 싱글소성은 커다란 이득이 있다. OASIS의 DITA (Darwin Information Typing Architecture)는 기술문서들을 저작하고, 생성하고, 배포하기 위한 XML기반의 아키텍처이다. 이 기술은 정보타입에 따라 분류한 토픽 모듈들을 생성한 다음 다양한 방식으로 이런 콘텐트를 이용하는 설계 규칙들의 집합이다. 본 논문에서는 서로 다른 정보제품을 제작할 때 기존의 콘텐트 콤포넌트의 재사용성을 향상시키기 위해, DITA기반의 기술문서 개발을 위한 접근방법을 연구하였다.

X-RAY PHOTOELECTRON SPECTOSCOPIC ANALYSIS OF ALUMINUM COMPOUND ADSORBED ON PULP FIBER SURFACES

  • Takuya Kitaoka;Hiroo Tanaka
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
    • /
    • pp.239-244
    • /
    • 1999
  • aluminum sulfate (alum) as a representative retention aid in papermaking processes was added to pulp suspensions, and the aluminum components adsorbed on the pulp were investigated quantitatively by two types of X-ray elementary analyses with regard to simultaneous changes of their surface charges. X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence analysis (XFA) were applied to determine the aluminum components retained in pulp pads up to ca. 10 nm and 100${\mu}$m depth, respectively. In other words, XPS was utilized to analyze the outermost surface layers of the samples, and XFA was available for measurement of their extensive regions. A particle charge detector (PCD) was used to monitor streaming potentials at various pHs of the pulp mixtures under moderate sharing conditions. At pH 4.5 of pulp suspensions containing alum, surface charges of pulp fibers varied from negative to slight negative (approximately neutral) according to adsorption of aluminum components onto the pulp fibers. Subsequently, when a dilute NaOH solution in limited amounts was added to pulp mixtures, both streaming potentials and surface aluminum content of the pulp fibers increased distinctly although little total aluminum retention increased. Further addition of alkali solutions brought drastic decreases of the surface charges and surface aluminum content, while total aluminum content, on the contrary, increased gradually under neutral conditions. These results indicate that residual aluminum ions remained in pulp suspensions are predominantly adsorbed on surfaces of pulp fibers by adequate alkali additions and they must sufficiently cationize the fiber surfaces with increases of somewhat cationic aluminum complexes formed on the surfaces. On the other hand, aluminum components formed in higher pH ranges have nearly no contribution to improvement of charge properties of the pulp fiber surfaces, even though aluminum retention in pulp pads increases. XPS and XFA analyses combined with streaming potential measurement using a PCD suggest close relationships between aluminum content on the pulp fiber surfaces and their charge properties.

몰입감 향상을 위한 VR 영상 콘텐츠의 시청각 유도와 구성요소에 관한 연구 (A Study on Visual and Auditory Inducement of VR Image Contents and the Inducement Components of for Immersion Improvement)

  • 이랑구;정진헌
    • 디지털융복합연구
    • /
    • 제14권11호
    • /
    • pp.495-500
    • /
    • 2016
  • 2016년을 기점으로 VR 시장이 급속도로 성장하고 있으며, 현재 VR 시장에서 가장 중요한 이슈로 떠오르고 있는 것은 VR 콘텐츠이다. 사용자의 몰입감과 상호작용을 최대한 충족시킬 수 있는 제작 기법과 좀 더 다양한 VR 콘텐츠가 필요하기 때문이다. 본 연구는 VR 콘텐츠 중 VR 영상 콘텐츠를 중심으로 몰입감을 지속할 수 있게 하고 향상할 수 있는 시청각 유도의 구성요소들을 국내외 사례 분석을 통해 시청각 유도의 올바른 방향성을 찾아보았다. 그 결과 시청각 유도의 시각적 청각적 구성요소로는 촬영, 편집, 조명, 스티칭, 그래픽, 이펙트, 성우 내레이션, 더빙, 등장인물의 음성, 배경음악 및 효과음 등이 있었고, 다시 기술적 내용적 요소로는 촬영기법, 편집기법, 조명, 스티칭, 그래픽과 이펙트, 사운드 및 효과음, 미장센 중심의 연극적 연출, 등장인물의 대사 및 내레이션, 등장인물과 오브제의 움직임 등으로 나타났으며, 더불어 향후 VR 영상 콘텐츠는 몰입감을 향상할 수 있는 시청각적 구성요소들과 함께 기술적 내용적인 구성요소들이 필요하며 지속적인 연구가 병행되어야 할 것이다.

Impact of Lignin Determination Method on Oxygen Delignification Chemistry

  • Shin Soo-Jeong;Lai Yuan-Zong
    • 펄프종이기술
    • /
    • 제37권5호통권113호
    • /
    • pp.50-55
    • /
    • 2005
  • In previous report, we investigated the impact of hexeneuronic acid and some residual extractiveson lignin determination. These non-lignin components severely interfered lignin content determination which also affect on the oxygen delignification comparison between aspen and pine unbleached kraft pulps. Very different pattern was observed whether based on uncorrected conventional kappa number or based on corrected kappa number in oxygen delignification comparison. Lower kappa number aspen pulps showed poor response to oxygen delignification when kappa number was used as lignin determination method but better response with using the acid lignin method. Phenolic hydroxyl group in kraft pulps were also compared based on uncorrected or corrected kappa numberfor lignin content. Based on uncorrected kappa number, lower kappa number oxygen-delignified pulps had lower phenolic hydroxyl group. However, lower kappa number oxygen-delignified pulps showed much higher phenolic hydroxyl group based on the corrected lignin content. For accurate comparison for residual lignin properties from different pulps, lignin determination should be corrected from non-lignin components contribution to lignin.

The Optimal Composition of Cold Bonded Pellet for Recycling EAF Dust Directly to the Furnace

  • Lee, Kwang-Keun;Kim, Tai-Dong
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.370-374
    • /
    • 2001
  • The degree of iron recovery from dust agglomerates was investigated experimentally to determine the optimum mixing ratio of coke in cold bonded pellet(CBP) which is fed into electric arc furnace(EAE) in the minimill plant. From the XRD analysis for EAF dust, magnetite(Fe$_3$O$_4$) and franklinite(ZnFe$_2$O$_4$) was identified as major components. Maximum iron recovery was obtained for the solid carbon content of approximately 18 weight percent. From plant trials of CBP composed of this optimal mixing condition, it was observed that electric power consumption and sulfur content increased with increasing the quantity of CBP.

  • PDF

기업 이러닝시스템 성과에 대한 이해관계자 인식 부합 관점의 연구 (Consensus of Corporate e-Learning System Stakeholders Regarding the Satisfaction of End-Users)

  • 김재식;양희동;엄혜미;김재경
    • Asia pacific journal of information systems
    • /
    • 제15권4호
    • /
    • pp.27-60
    • /
    • 2005
  • The purpose of this study is to call attention to the consensus of stakeholders of corporate e-Learning system for the sake of its success. We identified the critical success factors(contents, technical features, management, and organizational support) as major components of corporate e-Learning systems and questioned whether stakeholders' consensus on the importance of these components facilitates the successful implementation of these components. We also questioned whether the influence of these components on user satisfaction could be moderated by contextual factors. Based on empirical testing of 18 e-Learning user companies, we verified that the consensus of stakeholders regarding the importance of content, technological features, and organizational support has a positive influence on the perceived quality of these factors in their e-Learning systems, which in turn is positively related to user satisfaction. The learning subjects and learning style did significantly moderate the influences of these perceived qualities on user satisfaction.

닥나무 박피 자동화를 위한 닥 인피의 구성성분 분석 (Component Analysis of Paper Mulberry Bark for the Automation of Bark Peeling Process)

  • 서진호;김형진
    • 펄프종이기술
    • /
    • 제43권1호
    • /
    • pp.74-82
    • /
    • 2011
  • The bast fiber of Paper mulberry has been generally used as a fibrous raw material in traditional Hanji-making. Nowadays, its uses is expanded to different special purposes such as paper mulberry yarn, laminated paper, antimicrobial paper depending on its application. Despite the wide array of the use of mulberry fibers, it is still limited due to some difficulties in the automation process of manufacturing works. This study is focused on the analysis of chemical components and morphological properties of paper mulberry bark for the automation of bark peeling process. The bast tissue of paper mulberry was separated in three plies; black outer layer, green inner layer, and white inner layer. The total lignin content, holocelluloses, extractives and ashes, and the anatomical structure of the three layers in mulberry bark tissue were investigated. The analysis showed that the black outer layer is composed of about 50% of total lignin content, whereas the white inner layer is composed of about 90% of holocellulose content.

천연 및 양식산 넙치의 지방질성분 (Comparison of Lipid Components in Wild and Cultured Bastard)

  • 오광수;노락현;김정균;이응호
    • 한국식품과학회지
    • /
    • 제20권6호
    • /
    • pp.878-882
    • /
    • 1988
  • 양식어의 품질평가라는 관점에서 천연산, 양식산넙치와 유사어종인 도다리의 지방질성분을 분석, 비교하였다. 시료어의 지방함량은 $1.6{\sim}2.0%$로서 큰 차이는 없었고 중성지방질, 당지방질 함량은 천연산넙치 및 도다리가 많았고. 반면 인지방질은 양식산넙치가 많았다. 시료어의 중성지방질은 트리글리세리드$(64.1{\sim}68.1%)$가 주성분이었고, 인지방질은 포스파티딜콜린과 포스파티딜에탄올아민이 주성분이었다. 천연산넙치 및 도다리는 양식산넙치에 비해 트리글리세리드, 포스파티딜에탄올아민의 함량은 다소 많았으나 스테롤류, 포스파티딜콜린 등은 작았다. 시료어 근육부분의 지방산조성은 양식산이 22 : 6의 비율이 상당히 높았고 이를 주제로 한 폴리엔산의 비율이 다른 시료어에 비해 높았다. 16 : 1 및 18 : 1과 같은 모노엔산은 천연산이 높았으며, 포화산의 경우는 시료어간지방산조성의 차이가 거의 없었다. 도다리는 넙치에 비해 20 : 5의 비율이 높은 점이 특징이었다. 총 지방질의 주요 구성지방산으로는 세 시료어 모두 16 : 0, 22 : 6, 18 : 1, 20 : 5, 16 : 1 순으로 서로 비슷하였다. 중성, 당지방질, 및 인지방질의 지방산조성은 각 획분별로 다소의 차이는 있었으나, 시료어 간에는 조성이 거의 비슷하였다.

  • PDF

Impact of Residual Extractives and Hexenuronic Acid on Lignin Determination of Kraft pulps

  • Shin Soo Jeong;Schroeder Leland R;Lai Yuan Zong
    • 펄프종이기술
    • /
    • 제36권5호
    • /
    • pp.62-68
    • /
    • 2004
  • The amount of non-lignin components in unbleached and oxygen-delignified kraft pulps and their impact on lignin determinations was investigated. The lignin analyses investigated were kappa number and Klason lignin in conjunction with acid-soluble lignin. The species investigated were loblolly pine, and aspen. The non-lignin components that impacted on lignin determination were residual extractives and hexenuronic acid in unbleached and oxygen-delignified kraft pulps. In the hardwoods, significant amounts of extractives remained after kraft pulping and oxygen delignification. These residual extractives in the hardwood pulps had an impact on the lignin determination, more so on the acid lignin method than kappa number. Hexenuronic acid only impacts on kappa number determination both softwood and hardwood pulps, not on acid lignin. Hexeneuronic acid contributed as lignin content more in aspen than pine pulps, and more in oxygen-delignified than unbleached kraft pulps. Impact of hexenuronic acid on should be corrected both softwood and hardwood pulps for accurate kappa number.

붕장어의 크기에 따른 지방질성분 및 아미노산 조성의 비교 (Comparison of Lipid Components and Amino Acid Composition of Sea Eel by Size)

  • 오광수;문수경;이응호
    • 한국식품과학회지
    • /
    • 제21권2호
    • /
    • pp.192-196
    • /
    • 1989
  • 우리나라에서 생선회로 가장 많이 먹고 있는 붕장어를 대형, 소형의 크기별로 구입하여 지질 성분 및 아미노산 조성을 분석, 비교하였다. 대형 붕장어는 소형어에 비하여 수분 및 조단백질 함량이 다소 많은 반면 조지방 함량은 4.2%로서 소형 붕장어의 9.8%에 비하여 적었다. 대형 및 소형 붕장어의 증성지방질 함량은 각각 총지방질의 89.7%, 93.3%를 차지하고 있었으며 인지방질은 8.9%, 5.2% 함유되어 있었다. 총지방질의 지방산 조성은 대형 및 소형 붕장어 모두 18:1을 주체로 한 모노엔산이 47.1%, 50.3%로 함량이 가장 많았고 다음으로 22:6이 주가 된 폴리엔산이 33.4% 및 25.2%, 16:0을 주체로 한 포화산은 19.5% 및 24.5% 함유되어 있었다. 중성 및 당지빙질은 18:1을 주성분으로 한 모노엔산의 조성비가 높은 반면 인지방질은 폴리엔산의 조성비가 높았다. 대체로 대형 붕장어는 소형어에 비해 20:5, 22:5, 22:6과 같은 고도불포와 지방산의 함량이 않았고 소형 붕장어는 16:0, 16:1, 18:1등의 포화산 및 모노엔산이 많았다. 총 아미노산량은 대형 붕장어가 17022.7mg/100g, 소형어가 15409.4mg/100g 이었고. aspartic acid, glutamic acid, isoleucine, leucine, lysine, arginine 등이 주요 구성아미노산 이었다. 소형 붕장어에는 대형어에 비해 aspartic acid, glutamic acid가 많이 함유되어 있었고, 대형 붕장어는 cystine, methionine, tyrosine, phenylalanine의 함량이 많았다.

  • PDF