• Journal of The Korean Association of Information Education
• /
• v.22 no.3
• /
• pp.297-305
• /
• 2018

Physical computing is the concept of expanding computing to humans, environments, and objects. It draws attention as a programming learning medium based on physical outputs in integration of hardware and software. This study developed a programming learning model based on interactive prototyping using the characteristics of physical computing with a high degree of technical freedom and analyzed its learning effect in an experiment. To examine the effect of the experimental treatment, this researcher divided fifty nine 5th-grade elementary students into an experimental group and into a control group. the interactive prototyping programming learning model was applied to the experimental group, and a linear sequential programming learning model was applied to the control group. Information Science Creative Personality Test was conducted before and after the experimental treatment. Analysis of Covariance was conducted with the pre-test scores of the two groups. As a result, it was proved that there was the effect of learning at the significance level of .05. It indicates that the physical computing based interactive prototyping programming learning model is applicable to the programming learning for 5th-grade elementary students.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.4
• /
• pp.175-184
• /
• 2017

With the improvement of living standards, the ventilation for the mitigation of indoor or outdoor air-pollution problems has recently attracted a lot of attention. Consequently, the ventilation for the supply of outdoor fresh air into a room is treated as an important building-design factor. The ventilation is generally divided into the forced and natural types; here, the former can control the ventilation rate by using mechanical devices, but it has the disadvantages of the equipment costs, maintenance costs, and noise generation, while the latter is applied to most workshops due to the absence of noise and the low installation and maintenance costs. In this experimental study, the ventilation performance of a typical rotating-type natural ventilator, which is called a "wind turbine," was investigated with the outdoor-wind velocity and the indoor/outdoor-temperature difference. From the experiment results, it was confirmed that the temperature difference of $10^{\circ}C$ corresponds to the ventilation driving force with an outdoor-wind velocity of 1.0 m/s. Additionally, the intake-opening area of a building also exerts a great effect on the ventilation rates.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.5
• /
• pp.415-423
• /
• 2020

GNSS (Global Navigation Satellite System) is mostly used for high-precise surveys due to its accuracy and efficiency. But this technique does not always fulfill the demanding accuracy in harsh operational environments such as urban canyon and forest. One of the remedies for overcoming this barrier is to compose a heterogeneous surveying network by adopting terrestrial measurements (i.e., distances and angles). Hence, this study dealt with the adjustment of heterogeneous surveying networks consisted of GNSS baseline vectors, distances, horizontal and vertical angles with a view to enhancing their accuracy and so as to derive an appropriate scheme of the measurement combination. Reviewing some technical issues of the network adjustments, the simulation, and experimental studies have been carried out, showing that the inclusion of the terrestrial measurements in the GNSS standalone overall increased the accuracy of the adjusted coordinates. Especially, if the distances, the horizontal angles, or both of them were simultaneously adjusted with GNSS baselines, the accuracy of the GNSS horizontal component was improved. Comparing the inclusion of the horizontal angles with those of the distances, the former has been more influential on accuracy than the latter even though the same number of measurements were employed in the network. On the other hand, results of the GNSS network adjustment together with the vertical angles demonstrated the enhancement of the vertical accuracy. As conclusion, this paper proposes a simultaneous adjustment of GNSS baselines and the terrestrial measurements for an effective scheme that overcomes the limitation of GNSS control surveys.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1420-1425
• /
• 1998

Rice wines, Yakju-type, were brewed with typical raw materials plus powdered acorns, and storage qualities of the fermented wines were examined. Initial optical densities of the acorn added-rice wines were shown around 0.116 at 660 nm and then decreased to $0.06{\sim}0.075$ after 10 days storage at $4^{\circ}C$. Organic acid contents in the acorn added-rice wines were lower than that of the control: the contents were lactic, succinic, citric, malic, oxalic and fumaric acid in order; and gallic acid, a kind of tannic substances was 0.39 mg%. Peroxide values of the acorn added-rice wines were not markedly changed for 9 days, remaining as low as $2{\sim}3\;meq\;kg^{-1}$ lard of lard, but that of the control was increased to $265\;meq\;kg^{-1}$ lard. As the results of clarity, acidity and antioxidation, the acorn added-rice wines appeared to be preservable, owing to tannic substances extracted from acorn powder.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1491-1497
• /
• 2003

The improvement of abilities of utilizing information as well as the education of information is coming to the fore as a really significant matter for students living in knowledge and information-oriented society of the 21st century. In this respect, this study aims to develop a teaching and learning model for technical high school students who need mon desire and comprehensive faculty of their learning and to testify its efficiency by relating their abilities of using in with their curriculum. We propose a teaching and learning model, LT&T, which lets the students have academic interests and perform continuously learning activities by helping students themselves to find their achievements of learning and their learning ability. The LT&T teaching and learning model, proposed in this paper, is developed by combining LT and Tournaments, and it enhances individual several intellectual powers, and also activates the academic interests to increase the effects of learning. After we had a class using the LT and the LT&T, we conducted a sample survey of which results show that learning effects of LT&T is better than that of LT by students of more 80%.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2010

The purpose of this study was to analyze the kinematic factors and throwing variables for the 3-turn and 4-turn techniques and for release as well as to provide technical advice for improving athletic performance in hammer throwing. Data analysis led to the following conclusions: To increase the rotation speed for the 3-turn and 4-turn techniques, the time elapsed during the 1-foot support period should be decreased the distance between the rotating foot and the rotation axis should be small and the height of the hip joint should be increased at the times of release The throwing angle at the moment of release should be more than 40 degrees, and the throwing position should be taken vertically high at the shoulder joints. To accelerate the motion of the hammer, the speed should not be reduced during the 1-foot support period but should be increased during the 2-foot support period for much greater acceleration. In the 3-turn technique, the angles of the shoulder axis and hummer string should be dragged angle at the maximum point and lead angle at the minimum point, and dragged angle at the maximum and minimum points in the 4-turn at the time of relase The upper body should be quickly bent backward, the knee angle should be extended, and the angles of the shoulder axis and hammer string should be dragged angle close to 90 degrees.

• The Plant Pathology Journal
• /
• v.36 no.6
• /
• pp.515-535
• /
• 2020

Essential oils (EOs) have gained a renewed interest in many disciplines such as plant disease control and medicine. This review discusses the components of ginger EOs, their mode of action, and their potential nanotechnology applications in controlling tropical plant diseases. Gas chromatography-mass spectroscopy (GC-MS), high-performance liquid chromatography, and headspace procedures are commonly used to detect and profile their chemical compositions EOs in ginger. The ginger EOs are composed of monoterpenes (transcaryophyllene, camphene, geranial, eucalyptol, and neral) and sesquiterpene hydrocarbons (α-zingiberene, ar-curcumene, β-bisabolene, and β-sesquiphellandrene). GC-MS analysis of the EOs revealed many compounds but few compounds were revealed using the headspace approach. The EOs have a wide range of activities against many phytopathogens. EOs mode of action affects both the pathogen cell's external envelope and internal structures. The problems associated with solubility and stability of EOs had prompted the use nanotechnology such as nanoemulsions. The use of nanoemulsion to increase efficiency and supply of EOs to control plant diseases control was discussed in this present paper. The findings of this review paper may accelerate the effective use of ginger EOs in controlling tropical plant diseases.

• Research in Community and Public Health Nursing
• /
• v.32 no.3
• /
• pp.281-291
• /
• 2021

Purpose: This study examined health determinants at a community level and put forward to a typology of five different forms of community health vulnerabilities. We also investigated the differences in the prevalence of chronic diseases, self-rated health, and quality of life (EQ-5D) among the five types. Methods: Latent class analysis was applied to material, social capital, and health behavior vulnerability variables across 255 regions of South Korea. The data came from 2017 & 2019 Community Health Survey. Results: We found five types of community health vulnerabilities: Type 1 group had the highest material vulnerabilities compared to Type 5. The typology was found to be significant in all the regression analysis on the prevalence of chronic diseases (hypertension and diabetes), self-rated health status, and quality of life. In the regions with high material vulnerabilities, the material vulnerability appeared the most effective to the health status of individual's. In the other regions with less material vulnerabilities, the social capital and health behavior resources were found to be effective. Conclusion: A comprehensive measure of vulnerability can be helpful to understand community health. Policy makers need to consider the level of material vulnerability when planning for a health promotion project.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3327-3334
• /
• 2021

Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.

• The Korean Journal of Franchise Management
• /
• v.10 no.3
• /
• pp.13-23
• /
• 2019

Purpose - The recent franchise industry is rapidly developing. Some franchisees have a low barriers to entry and competition among companies is intensifying. In this dynamic competitive environment, companies need to focus on customer preferences, quality, and technical interfaces to gain competitive advantage. As a result, companies are required to measure the performance of service values in order to provide differentiated services from competitors. In the franchise industry, customer experience marketing of service values will enable companies to create new businesses. Franchise firms should explore a variety of services to increase service value and reduce failures. Research design, data, methodology - The questionnaire of this study was based on the previous research. Surveys were conducted on panels of online surveys. Surveys were conducted on the panel who had visited the restaurant franchise within the past month. The survey was conducted for about 7 days from February 13, 2019 to February 19, 2019. Total 300 samples, 293 were used in the analysis except for seven unfair questionnaires. Results - The findings of this study are as follows: Emotional, monetary, and reputation values have positive effects on cognitive and affective attitudes. Quality value and behavioral value did not effect cognitive attitude and affective attitude significantly. In addition, affective attitude has positive effect on loyalty, but cognitive attitude did not significant effect on loyalty. Conclusions - First, food-service franchise company should develop a service that enables customers to use the store conveniently. We need to develop a comfortable environment for our customers and provide intangible services. Second, food-service franchise company should provide a reasonable price service. Food-service franchise company needs to sell a high quality menu at a reasonable price to generate profits. Third, food-service franchise companies need to strategically respond to their reputation. In other words, food-service franchise company needs to constantly monitor the reputation of its customers and respond appropriately to market conditions. Fourth, food-service franchise company needs to develop a service method capable of emotional interaction with customers. Food-service franchise firms need to develop ongoing service methods and educate their staff.