• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1350-1358
• /
• 2001

During the last decade, a number of experiments and numerical analyses had been performed in conjunction with the development of simplified analytical methods to estimate the fracture behavior of cracked piping in nuclear power plant. However, the necessity of further investigation for the analytical methods was issued because of the discrepancies with the experimental data. The objective of this paper is to find out the optimum methods to evaluate the load-carrying capacities for cracked pipes. To do this, numerous analytical and finite element analyses were carried out for various pipe and crack geometries and materials. These results were synthesized for crack shapes and can be used as basic data for leak before analyses and risk informed inspections.

• 한국공간구조학회논문집
• /
• 제10권2호
• /
• pp.127-134
• /
• 2010

막 구조는 자유로운 형태, 경량성, 내구성, 햇빛 투광성 및 균질성 때문에 전 세계적으로 현대 건축물에 다양하게 사용되어 왔다. 새로운 막 재료의 개발로 새로운 건축 구조설계에 대한 가능성을 열어가고 있다. 최근 주로 사용되는 막 구조의 지붕 재료에는 PVC, PVF, PVDF, PTFE 코팅 막재 및 ETFE 막재가 수로 사용되고 있다. 건축용 막은 내화성, 강도 부족, 인열강도, 내구성 및 탄성 등에 대한 몇가지 문제점들을 가지고 있다. 이러한 문제점들을 평가하기 위해서 본 연구에서는 PVDF 코팅 폴리에스터 막재에 대한 인장강도, 인열 강도 및 반복하중거동 시험을 실시하여 건축용 막재의 기초적인 역학적 특성을 분석하고자 한다. 막재의 탄성계수는 337.30~1257.63N/$mm^2$, 신율은 17.90~26.91%로 주어졌다.

• Nuclear Engineering and Technology
• /
• 제21권3호
• /
• pp.165-170
• /
• 1989

준 동적 파괴가 일어나는 변형율속도 조건에서 A533B-1 원자로 압력용기강의 파괴인성 및 파괴저항특성에 미치는 변형율속도의 영향을 균열선단의 강 소성역 관찰 및 파면의 미세거칠기측정을 통해 연구하였다. 1/2T-CT 파괴시편에서 약 1.5mm 이하의 균열진전에 대해서는 소성일로 부터 구한 J와 수정 J가 거의 일치하였다. 파면의 미세거칠기로부터 구한 국부 변형율은 1.8-2.0 정도의 값을 나타내어 거시적으로 측정된 값보다 높은 값을 보여주었다. 이들 방법은 모두 변형율속도가 증가함에 따라 파괴인성은 증가하나 tearing modulus는 큰 변화가 없음을 보여주었다.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1843-1853
• /
• 1996

The objective of this paper is to evaluate the crack stability of the nuclear main stresm pipes, considering the load reduction effect due to the presence of circumferential throuth-wall crack. Also, the optimization techniques are adoped tosimulate the crack effect on the elbow component of the piuping system. By using a general beam elemetn which contains a discontinuous cross-section, the piping analysis is accomplished to acquire the reduced load. Considering this reduced load, it is feasible for the LBB application in nuclear main stresm pipe. Also, by combining an optimization program and a genaral finite element analysis program, the appropriate dimensions of the simplified beam elemtn which represents the effect of crack in elbow could be successfully determined.

• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.161-176
• /
• 1993

본 논문에서는 주어진 상황에 맞추어 적절한 수준에서 건전성평가를 수행하기 위하여, 개정된 BSI PD 6493의 3단계 평가방법에 균열성장효과를 고려한 건전성 평가방법과 균열의 안정성장을 엄밀히 고려할 수 있는 안정성 평가방법(stability assessment method:SAM)과 더불어 소성 붕괴를 평가하는 극한하중해석을 고려한 건전성 평가방법을 정식화하였다. 또한 신뢰성이론 중 2차 모멘트방법을 사용하여, center cracked panel(CCP) 시편과 관통균열을 갖는 파이프에 대하여, 신뢰성해석에 의한 건전성 평가를 수행하였다. 신뢰성해석을 수행하는데 필요한 확률변수들의 통계적 특성은 지금까지 보고된 그들 변수들의 실험자료와 통계해석의 결과들을 이용하였다. 또 기존의 신뢰성해석에서 정확한 파괴확률을 구할 수 있는 Monte Carlo 방법을 사용하여, 본 논문의 유용성을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.488-503
• /
• 1999

The present paper considers the constraint effect on J-R curves under the two-parameter $J-A_2$ controlled crack growth within a certain amount of crack extension. Since the parameter $A_2$ in $J-A_2$ three-term solution is independent of applied loading under fully plasticity or large-scale defor-mation $A_2$ is a proper constraint parameter uring crack extension. Both J and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and A2 as a con-straint parameter. Approach of the constraint-corrected J-R curve is proposed and a procedure of transferring the J-R curves determined from standard ASTM procedure to non-standard speci-mens or real cracked structures is outlined. The test data(e.g. initiation toughness JIC and tearing modulus $T_R$) of Joyce and Link(Engineer-ing Fracture Mechanics 1997, 57(4) : 431-446) for single-edge notched bend[SENB] specimen with from shallow to deep cracks is employed to demonstrate the efficiency of the present approach. The variation of $J_{IC}$ and $T_R$ with the constraint parameter $A_2$ is obtained and a con-straint-corrected J-R curves is constructed for the test material of HY80 steel. Comparisons show that the predicted J-R curves can very well match with the experimental data for both deep and shallow cracked specimens over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. The constraint effects of specimen types and specimen sizes on the J-R curves can be easily obtained from the constrain-corrected J-R curves.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.176-183
• /
• 2020

In order to study wearable air cushion materials capable of responding to massive impact in high-altitude fall situation, high tenacity woven fabrics were bonded by heat only depending on various type of thermoplastic films and then mechanical properties were measured. Tensile strength, elongation, and 100% modulus measurement results for 4 types of films show that TPU-2 has higher impact resistance and easier expansion than PET-1. After thermal bonding, the combination with the highest tensile strength was a material with a TPU-2 film for nylon and a PET-2 film for PET, so there was a difference by type of fabric. The tear strength of the bonded materials were increased compared to the fabric alone, which shows that durability against damage such as tearing can be obtained through film adhesion. All of the peel strengths exceeded the values required by automobile airbags by about 5 times, and the TPU-2 bonded fabric showed the highest value. The air permeability was 0 L/dm2 /min. For both the film and the bonded material, which means tightness between the fabric and the film through thermal bonding. It is expected to be applied as a wearable air cushion material by achieving a level of mechanical properties similar to or superior to that of automobile airbags through the method of bonding film and fabric by thermal bonding.

• 한국식품영양과학회지
• /
• 제34권2호
• /
• pp.298-305
• /
• 2005

과채류 포장용 기능성 항균포장지는 항균력이 우수한 식물성 항균소재(botanical antimicrobial agent-grapefruit seed extract mixture: BAAG)의 CaCO$_3$분말제재와 가스흡착제 기능을 소유한 제올라이트를 일정배합비율로 펄프지료에 첨가하여 TAPPI Standard Method T200 sp-96에 의거하여 제조하였다. 아울러, 보류향상제인 cationlc polyacrylamide (Ca-PAM)와 발수처리제 alkyl ketone dimer(AKD)도 같이 첨가하였다. 이때, 사용된 BAAG분말의 평균입자크기는 12.45였으며, Scanning Electron Microscope 촬영사진에서 CaCO$_3$에 침착되어 있는 BAAG 및 제올라이트가 육면체 형태의 미세한 분말로 지료상에 구성되어 있음을 알 수 있었으며, 포장원지내에 보류된 항균제의 보유량을 회분함량으로 측정한 결과, 항균제의 첨가량을 증가시킬수록 회분함량이 증가하는 것으로 미루어 Ca-PAM이 지료 섬유 네트워크내에 항균제를 정착시키는데 매우 효과적인 보류향상제로 작용함을 알 수 있었다. 한편, 분말형 항균제와 제올라이트를 지료에 첨가하여 포장원지를 제조하였을 때, 포장원지의 인장강도(tensile strength)와 파열강도(burst strength)는 항균제와 제올라이트를 첨가하지 않았을 때보다 다소 감소하는 경향을 나타내었고, 반면에 강성(stiffness)과 인열강도(tear strength)는 증가하는 경향을 나타내었다. 그러나, 기능성 첨가제 분말의 첨가로 인하여 발생할 수 있는 골판지 상자의 라이너나 단위 포장용(itempackaging)포장지의 강도적 성질의 감소현상이 미미할 것으로 판단되어 항균포장지 제조에 사용되는 항균제와 제올라이트분말은 종이의 물성 열화에 미치는 영향이 크지 않는 것으로 나타났다.