• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.270-275
• /
• 2008

Crack growth characteristics of elastomeric materials are an important factor determining the strength and durability. In this study, the fatigue crack growth characteristic of filled EPDM compounds with different reinforcing fillers, such as silica and carbon black, was investigated using a newly designed tester. Frequency and test temperature had significant effects on the fatigue crack growth. The crack growth rate decreased with increasing frequency and the rate increased with increasing temperature. A power law relationship between the tearing energy and crack growth was observed for filled EPDM compounds. The crack growth rate reduced with increasing filler contents. Silica filled EPDM showed a better fatigue resistance than carbon black filled EPDM. The crack growth rate of silica filled EPDM decreased up to 30 phr and increased again at 50 phr. The formation of microductile type pits was observed on the fatigue-failure surface of unfilled EPDM, and relatively coarse surface with randomly distributed tear lines was observed on the failure surface of silica filled EPDM.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.9-19
• /
• 2007

In this study, SBR (Styrene-butadiene rubber: solid content: 25 wt%) nanocomposites reinforced with carbon/organoclay(C18-MMT) were manufactured by a latex method. The SBR nanocomposites was made with the dual phase fillers. The mixing ratios, i.e. carbon black/C18-MMT, were 50/0, 49/1, 48/2, 47/3, 45/5, 44/6, 40/10. Total filler content of compounds was restricted to 50 phr. Cure characteristics and mechanical properties of SBR nanocomposites with carbon black and C18-MMT were evaluated. The SBR nanocomposites containing 49/1 ratio of carbon black/C18-MMT showed good dispersity and excellent values of ODR torque, tensile strength, modulus and tear energy. It was found that the improvement of the mechanical properties was mainly due to the reinforcing effect, i.e., the improvement of dispersion of silicates in the rubber matrix.

• Clinics in Shoulder and Elbow
• /
• v.20 no.3
• /
• pp.126-132
• /
• 2017

Background: The aim of the present study was to determine the correlation between the amount of pain reduction after local anesthetic injection into the subacromial space preoperatively and clinical outcome after arthroscopic rotator cuff repair. Methods: A total of 127 patients who underwent arthroscopic rotator cuff repair and followed up at least 1 year were analyzed retrospectively. Preoperatively, a visual analogue scale (VAS) for pain was measured in all patients before and after the ultrasound guided impingement test. The participants were divied into four groups according to pain reduntion ater impingement test (Group A: >75%, Group B: 50%-75%, Group C: 25%-50%, Group D: <25%). VAS for pain, shoulder range of motion, shoulder isometric strength, ASES score were evaluated preoperatively and at 3, 6, 9, and 12 months postoperatively. Results: After surgery, the amount of pain reduction shows significantly at 3, 6 months in Groups A, B as compared to Groups C, D (p<0.05). Among the range of motion of shoulder joint, forward flexion was significantly improved in Group A at 3 months (p<0.05). The ASES score significantly improved at 3, 6 months in Groups A, B as compared to Group C, D (p<0.05). Conclusions: Preoperative degree of pain reduction after impingement test correlates with the improvement of pain after arthroscopic rotator cuff repair, especially in the early phase. Therefore, the impingement test could be effectively used.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.34-42
• /
• 1997

This study was carried out to investigate the proper cooking conditions of soda-anthraquinone and alkaline sulfite-anthraquinone pulping of rice-straw, and get basic data f9r the use of rice-straw chemical pulp through the test of characteristics and physical properties of pulps made in the various cooking conditions From the experimental results , we can conclude as follows. In the soda-anthraquinone pulping of rice-straw, the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of caustic soda of 20% with the addition of anthraquinone(0.05%). And total yield, Kappa No. and brightness of pulp made in the condition above mentioned were 41.9%, 7.7 and 51.1 respectively. In the alkaline sulfite-anthraquinone pulping of rice-straw, the proper mixing ratio of cooking chemical(caustic soda : sodium sulfite) was 50:50. And the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of cooking chemical of 20% with the addition of anthraquinone(0.05%). At that time, the total yield, Kappa No, and brightness of pulp were 50.1%, 9.1 and 40.2 respectively. As a result, the alkaline sulfite-anthraquinone pulping was superior to the soda-anthraquinone pulping in the aspect of yield, but inferior in the viewpoints of Kappa No. and brightness. For the comparison of qualities of pulps made in the various cooking methods and conditions, the physical properties of four sorts of pulps were tested. As a result, soda-anthraquinone pulps were superior to alkaline sulfite-anthraquinone pulps in the various strengths excluding tear strength and brightness. On the other hand, pulps made in the condition of addition of cooking chemical of 20% were superior to pulps in the dosage of 15% in the aspects of all the strengths and brightness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.51-61
• /
• 2012

The new alkali pulping process combined with electron beam treatment was applied to utilize hemp bast tissues as a new valuable fibrous resource. Hemp bast tissues have some chemical properties with high lignin contents and holocellulose not to be defiberized by alkali pulping only, compared with the bast tissue of paper mulberry. To make up for the weakness of traditional alkali pulping process, electron beams were directly irradiated into the swelled bast tissue of hemp in NaOH solution and distilled water, and then facilitated the defiberization of hemp bast tissues. The papermaking from hemp bast fibers manufactured by the combination pulping process showed good apparent density, formation structure and air permeability, and had some mechanical properties with lower tensile, tear, burst strength and folding endurance. It is finally concluded that the combination pulping process with electron beam treatment could be suggested a new alternative for non-woody fibers.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.245-251
• /
• 2006

Thermoplastic elastomer was prepared from dynamical vulcanization of isotactic polypropylene(iPP)/nitrile rubber blend (NBR/iPP=70/30 wt/wt) in an internal mixer using dicumyl peroxide (DCP) as a curing agent and zinc dimethacrylate (ZDMA) as a coagent. There was a great improvement in tensile and tear strength, elongation-at-break and lower tension set when ZDMA was incorporated into the blend, which is supposed to be due to the increase in crosslink density or the rubber phase and the reduction in size of the rubber particles. It was revealed that the dynamically vulcanized blend exhibited good reprocessibility, indicating its thermoplastic nature.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.59-65
• /
• 2005

Zinc methacrylate(ZMA) was incorporated into ethylene-propylene diene rubber(EPDM) by direct mixing of the metal salt with the rubber or was in-situ prepared in the rubber matrix through neutralization reaction of zinc oxide(ZnO) and methacrylic acid(MAA). Tensile and tear tests showed that ZMA had a great reinforcing effect for the EPDM. It was also found that ZMA reinforced EPDM vulcanizates can retain their mechanical properties under thermo-oxidative aging. Moreover the incorporation of ZMA induces a substantial improvement in the adhesive strength of the EPDM onto aluminum substrate. The reinforcing effect and an enhancement in adhesion was greatly manifested when the ZMA is in-situ formed with an excess amount of ZnO. The extraordinary improvement in the properties is supposed to be related with the formation of ionic crosslink as well as the degree of dispersion or ZMA domain in the rubber matrix.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.298-308
• /
• 2010

The mechanical properties and surface characteristics of parylene thin film were improved using Xylydene-based dimers (DPX-C, DPX-D, and DPX-N). A single-parylene-C, D, N film and a hybrid chemical and physical parylene thin films in which two types are mixed were manufactured for each dimer by adjusting the deposition conditions and the thickness of the thin film by input. Parylene was deposited by chemical vapor deposition (CVD) and the thermal characteristics of the single thin film and the hybrid thin film were compared by thermal analysis. The mechanical properties of the thin films were characterized by tensile strength, elongation, and tear force tests, and the surface characteristics of the thin films were evaluated by contact angle and surface energy measurements. The hybrid chemical parylene thin film in which two types are mixed can complement the strengths and weaknesses of the different dimers, while the physical parylene thin film can freely adjust the thin film characteristics of the coated surface and the opposite surface.

• Structural Engineering and Mechanics
• /
• v.87 no.2
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2013

Purpose: Adsorption properties of lysozyme and albumin according to physiochemical properties of commercial contact lens classified with the FDA categories and a contact lens fabricated in the laboratory were investigated. Methods: The contact lens were prepared using HEMA(2-hydroxyethyl methacrylate) and TRIM(3-(trimethoxysilyl) propyl methacrylate) in a cast mold. Artificial tears containing lysozyme and albumin were prepared. We measured the amounts of protein adsorbed on the each lenses with varying adsorbed time (48 hour) and the pH range (6, 6.8, 7.4, 8.2, 9) of artificial tear. Amount of the proteins absorbed on the contact lenses were measured by using HPLC. Results: Time to reach the equilibrium of protein adsorption for silicone hydrogel lens was taken longer than hydrogel lens. The amount of adsorbed both lysozyme and albumin at equilibrium were greater for the hydrogel lens than the silicone hydrogel lens, and larger for the ionic lens than the non-ionic lens. Lysozyme was more adsorbed on the higher water content of contact lens, whereas albumin was more adsorbed on the lower water content of contact lens. Only lysozyme was adsorbed on the Group IV hydrogel lens of ionic higher water content. The adsorption of protein on contact lens increased with pH of artificial tears as close to the isoelectric point of each protein. Conclusions: The adsorption amount of lysozyme is more affected by the ionic strength of the contact lens surface than the water content of contact lens. Albumin adsorption is more affected by water content than the ionic strength of the contact lens surface. For the adsorption of proteins on the silicone hydrogel lens, the pore size, determined both by the number of Si atoms and the chemical structure of the silicone-containing monomers, as well as the polarity of contact lens should be also considered.