• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1649-1652
• /
• 2006

2.22-inch qVGA $(240{\times}320)$ amorphous silicon thin film transistor liquid active matrix crystal display (${\alpha}$- Si TFT-AMLCD) panel has been successfully demonstrated employing a 2.5 um fine-patterning technology by a wet etch process. Higher resolution 2.22-inch qVGA LCD panel with an aperture ratio of 58% can be fabricated because the 2.5 um fine pattern formation technique is combined with high thermal photo-resist (PR) development. In addition, a novel concept of unique ${\alpha}$-Si TFT process architecture, which is advantageous in terms of reliability, was proposed in the fabrication of 2.22-inch qVGA LCD panel. Overall results show that the 2.5 um finepatterning is a considerably significant technology to obtain higher aperture ratio for higher resolution ${\alpha}$-Si TFT-LCD panel realization.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1763-1765
• /
• 2000

This paper presents deposition and characterizations of microcrystalline silicon ($\mu$ c-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature at 300$^{\circ}C$. The flow rates of $SiH_4$ gas are critical parameter for the formation of Si films with microcrystalline phase. We could obtain $\mu$ c-Si:H with columnar grain structure and volume fraction of 75% without H2 dilution. The electronic properties, hydrogen bonding configurations, and $H_2$ concentration inside the films are also strongly affected by $SiH_4$ flow rate, which is provided in this paper.

• Journal of Information Display
• /
• v.7 no.3
• /
• pp.1-4
• /
• 2006

2.22-inch qVGA $(240{\times}320)$ amorphous silicon thin film transistor liquid active matrix crystal display (a-Si TFT-AMLCD) panel has been successfully demonstrated employing a 2.5 um fine-patterning technology by a wet etch process. Higher resolution 2.22-inch qVGA LCD panel with an aperture ratio of 58% can be fabricated as the 2.5 um fine pattern formation technique is integrated with high thermal photo-resist (PR) development. In addition, a novel concept of unique a-Si TFT process architecture, which is advantageous in terms of reliability, was proposed in the fabrication of 2.22-inch qVGA LCD panel. Overall results show that the 2.5 um fine-patterning is a considerably significant technology to obtain higher aperture ratio for higher resolution a-Si TFT-LCD panel realization.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.101-125
• /
• 2010

This paper uses the status inconsistency theory to identify factors related to team members' (dis)satisfaction with the composition of virtual IT project teams in order to predict their turnover intentions. Our approach is based on the premise that virtual teams, although increasingly popular among global organizations, create an environment replete with cultural and functional diversity. Yet, a paradox exists: increasing diversity in virtual teams maximizes the creation and use of organizational knowledge while simultaneously increasing dissatisfaction and turnover. This is a critical issue in the formation and management of virtual teams. Therefore, we investigate how team members' perceptions of differences among themselves (i.e. foreignness) impact the stability of team membership, leading to what we describe as a 'liability of foreignness.' Findings indicate that a member's perception of foreignness has a detrimental effect on satisfaction with his or her team members while satisfaction is likely to decrease turnover intention. This may be an implication that managers need to maintain a balance in order to discourage member turnover and the loss of key players.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.33-42
• /
• 2004

In South Korea a Pedo-sedimentary Sequence(PS) indicating the Last Glacial Maximun(LGM) is typified y a brown to dark brown, relatively stiff paleosol layers formed by repetitive freezing and thawing processes which in turn left characteristi glossic textures in soil-solum, polygolnal structures with a flagipans, vertical soil wedges or freezing cracks, and horizontal foliations, As a pre-LGM sedimentary sequences (older than 25Ka), the Old Fluvial Sequence(OFS) overlain by the Slope Sedimentary Sequence(SS) are distributed commonly at the base level higher than 14-15m above present river-bed along the major river basin. After the LGM (ca. 18Ka), the Young Fluvial Sequence(YFS) appears at an altitude ascending order of sedimentary profiles. In this fluvial organic muds of Jangheungri site(Jinju), Sorori site(Cheonwon), and Youngsan estruarine rivermouth(Mokpo) were exemplified in order to interpret their formation ages and environments. As result of $^{14}C$ datings, the formation ages of te organic muds are Boelling to Alleroed (MIS-1). These organic muds were fomed in fluvial backswamp or local pond/bog in response to shifting fluvial system. On the basis of palynological production dominant with Abies/Picea-Betula and Ranunculaceae, Compositae, Cyperaceae, and Graminae, it was interpreted that more boreal to subboreal condition was prevailed rather than temperate like today during the formation of organic muds and soil moisture condition was a repetition of wet and dry condition.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.299-299
• /
• 2022

Whole wheat is rich in dietary fiber and contains various biological activity substances such as arabinoxylan, phytic acid and phenolic compounds. However, excessive fiber contents of whole wheat has a negative effect on dough formation, making it difficult to process. In this study, we tried to improve the usability of whole wheat by suggesting an appropriate degree of purification of whole wheat from 'Saekeumkang', a domestic wheat cultivar containing protein and gluten suitable for noodle production. The contents of arabinoxylan, phytic acid, and vitamin E were measured in the polishing rate range of 5-20% of whole wheat flour. As the milling ratio increased, the flour properties improved. The arabinoxylan and phytic acid content of whole wheat were 67.95 mg/g and 0.87 mg/g, but when milled at 20%, arabinoxylan and phytic acid were 60% and 80% of whole wheat, respectively. And as the milling ratio increased, the vitamin E content tended to decrease (whole wheat: 4.063 mg/100 g, 20% milled: 2.96 mg/100 g), However, the vitamin E composition ratio did not change. On the other hand, α-tocopherol showed the greatest than other vitamin E isomers. Therefore, further studies needed to optimize milling rate to improve the final product while maintaining the approximate nutritional and functional value of the whole wheat.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.53-58
• /
• 2006

When external field was applied to congruent $LiNbO_3$, it was investgated for domain formation and expansion of $LiNbO_3$. The domain wall velocities of 0.5 mm thickness $LiNbO_3$ were 28.70, 16.02 and $5.75{\mu}m/sec$ under poling field of 23.5, 22.0 and 21.0 kV/mm, respectively. As $1 M{\Omega}$ resistor was used in domain inversion system, harmonic domain inversion was not achieved by rapid domain expansion. And 50% duty cycle periodically poled $LiNbO_3$ have been fabricated by charge control using $10 M{\Omega}$ resistor.

• Asia pacific journal of information systems
• /
• v.7 no.2
• /
• pp.185-198
• /
• 1997

Recently the formation of the project team to construct a MIS system is generalized and the relationship of the user and the system personnel in the project team should be important factor in the effectiveness of the team. However, the systematic research about the personality typology of the user and the system personnel is scarcely verified. Considering this necessity, this study is, using the IS personality typology, tried to find the relationship of the user and the system personnel in the project team. One of Jung(1924)'s personality typology is introvert and extrovert, however, this typology is founa to have many facets related with personality category. Recently Ackoff(1996) has tried this category more meaningful, which are subjective-internalizer, subjective-externalizer objective-internalizer one objective-externalizer. Moreover, he has proposed the methodology which could find the assimilarity among the team members. On the basis of this typology, this research is attempted to find the difference of the characteristics of the user and the system personnel. Through this research, we can understand the difference of the characteristics of the user and the system personnel and this understanding can make help us operating the team more effectively. The result has suggested that the effectiveness of the team has relied on the personality type of the user and the system personnel. Especially the personality type of new member who will join into team is an important factor in the effectiveness of teaming. Therefore, when we have a new member into team, we have to consider the personality type of new member. Moreover, the personality type of the management is an another critical factor which should be considered.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.243-247
• /
• 2015

Si(Al)ON precursor was synthesized by formation of new Si-N bond using organoaluminum imine and liquid type poly(phenyl carbosilane). It was decomposed between $200-600^{\circ}C$, and the ceramic yield was 51% after pyrolysis. 150 - 200 nm in thickness of coating film was obtained by spin coating method. The precursor was easily oxidized during process because it was unstable in air. However the oxygen content was limited to 0.5 - 0.7 to silicon in heat treatment step. Even though the content of nitrogen was decreased by pyrolysis, Al-N and Si-N bonds were formed in ammonia atmosphere, and Si(Al)ON film was formed with 0.2 in content to silicon.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.70-77
• /
• 2010

In this paper, a case study of drivability and bearing capacity of large diameter steel pipe piles at PTT LNG site in Thailand is introduced. The LNG facilities were designed to be founded on steel pipe pile foundations driven into the weathered rock formation overlaid by sand layers. The drivability analyses of open ended pipe piles were carried out using GRL WEAP program and the bearing capacities of the piles were estimated. Dynamic load tests were performed to evaluate end bearing resistance, and it is shown that the measured end bearing resistance is smaller than the calculated end bearing because the plugging does not develop sufficiently in case of large diameter pipe piles.