• 대한간호학회지
• /
• 제28권2호
• /
• pp.468-478
• /
• 1998

The purpose of this study was to develop the computerized nursing diagnoses system for clinical application and activation of nursing diagnoses based on validity verification. In addition, our research team also performed system tests in clinical situations, to identify ways to improve the program and make it more practical. Nursing Diagnoses System will increase nurses' knowledge and experience of the application of nursing diagnoses in clinical situations and development of nursing interventions by nurses as well as the effectiveness of hospital computerized systems. We expect this system can contribute to an improvement in the quality of nursing care. Also we will continuously evaluate and revise the system related to the utilization of the program.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.12-17
• /
• 2009

마이크로프로세서를 사용하여 디지털 방식에 의해 온도보상을 하는 버스트 모드 광송신기를 구현하였다. 기존 실시간으로 신호를 처리하는 아날로그 방식의 온도보상 방법에 비하여, 본 연구에서 구현한 디지털 방식의 온도보상은 신호를 샘플링 처리함으로써 고속 버스트 모드 광신호를 효과적으로 처리할 수 있다. 온도보상을 위한 디지털 자동전력조절 방식은 데이터 전송속도에 영향을 받지 않을 뿐만 아니라, 아날로그 방식에 비해 보다 정확하고 효율적이므로 Gb/s 이상의 고속 버스트 광신호 처리에 유용하게 사용될 수 있다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1295-1304
• /
• 2015

In this paper, an approach to extend the life of lead-acid batteries through the elimination of sulfation with "rest time" using the pulse current of a conventional DPV (Differential Pulse Voltammetry) method is discussed. A new rest time without "0" current in "saw-tooth" pattern pulses is proposed to overcome the "0" current (blackout period), which is a shortcoming of DPV. This will enable the proposed method to be used in the loaded state. In the proposed approach, ESSs (Energy Storage Systems) were discharged for 5 h twice per day for 6 months on weekdays. To observe the changes in the lifespan of the systems, for the same period, the changes in the impedances of lead-acid batteries which were being charged e without charging and discharging were measure and compared. This study is focused on determining the effectiveness of lead-acid batteries as ESSs.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권3호
• /
• pp.239-254
• /
• 2006

In this research, first, the effect of Six Sigma activities and business performance will be checked based on case studies involving companies adopting Six Sigma and, secondly, the Six Sigma training effectiveness, Customer Satisfaction and Financial Performance, etc, will be evaluated to find out how related to Six Sigma Implementation. Finally, Six Sigma's Implementation Categories will be analyzed. The method used in this research was to select the research model and research hypothesis based on theoretical studies and the interesting aspects of the recent Six Sigma, along with case studies and research based on actual proof. Case studies and research based on actual proof showed that among 11 companies analyzed, a total of 11 companies obtained good results, and KIs were found to be factors of their success.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.428-433
• /
• 2001

This paper presents the control algorithm for maximum efficiency drives of an induction motor system with the high dynamic performance. This system uses a simple model of the induction motor that includes equations of iron losses. The model, which only requires the parameters of induction motor, is referred to a field-oriented frame. The minimum point of the input power can be obtained at the steady state condition. The reference torque and flux currents for the vector control of induction motors are calculated by the optimal efficiency control algorithm. The drive system with the proposed efficiency optimization controller has been implemented by a 32 bit floating point TMS320C32 DSP chip. The results show the effectiveness of the control strategy proposed for the induction motor drive.

• ETRI Journal
• /
• 제30권3호
• /
• pp.441-450
• /
• 2008

The scalable extension of H.264, known as scalable video coding (SVC) has been the main focus of the Joint Video Team's work and was finalized at the end of 2007. Synchronization between media is an important aspect in the design of a scalable video streaming system. This paper proposes an efficient media synchronization mechanism for SVC video transport over IP networks. To support synchronization between video and audio bitstreams transported over IP networks, a real-time transport protocol/RTP control protocol (RTP/RTCP) suite is usually employed. To provide an efficient mechanism for media synchronization between SVC video and audio, we suggest an efficient RTP packetization mode for inter-layer synchronization within SVC video and propose a computationally efficient RTCP packet processing method for inter-media synchronization. By adopting the computationally simple RTCP packet processing, we do not need to process every RTCP sender report packet for inter-media synchronization. We demonstrate the effectiveness of the proposed mechanism by comparing its performance with that of the conventional method.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.997-1006
• /
• 2018

This paper proposes a transformerless photovoltaic (PV) power converter system based on the DC/AC boost inverter, which can solve the leakage current and second-order ripple power issues in single-phase grid-connected PV inverters. In the proposed topology, the leakage current can be decreased remarkably since most of the common-mode currents flow through the output capacitor, by-passing parasitic capacitors, and grounding resistors. In addition, the inherent ripple power component in the single-phase grid inverter can be suppressed without adding any extra components. Therefore, bulky electrolytic capacitors can be replaced by small film capacitors. The effectiveness of the proposed topology has been verified by simulation and experimental results for a 1-kW PV PCS.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.99-107
• /
• 2017

In this work, the nutation control of rigid spacecraft with only two momentum wheels is addressed by applying the feedback linearization technique. In this strategy, the primary performance index is to regulate the nutational angle by the momentum control of wheels. The spacecraft attitude equations of motion are transformed to a general linearized form by feedback linearization technique, including a guaranteed control law promising the internal dynamics stability to accomplish the nutation angle small. It is proven that the configuration of inertia properties plays a key role in analyzing spacecraft energy level. The behavior of the momentum wheels is also studied analytically and numerically. Finally, the effectiveness of the proposed nonlinear control law for the momentum transfer is verified by conducting numerical simulations.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.127-134
• /
• 2009

RAM(Reliability, Availability, Maintainability) is important performance factor to keep combat readiness and optimize operational and maintenance cost of weapon systems. This paper discusses the method to establish RAM for combat readiness by using field failure data from similarity equipments. Operational availability is estimated from a binomial distribution function of user's operational conditions such as combat readiness preservation probability, operational rate, operational availability and total number of equipment. Reliability and maintainability is estimated from field failure data from similarity equipment to accomplish operational availability. The effectiveness of established RAM is verified through analysis of combat readiness preservation probability and mission reliability. A case study of weapon system illustrates the process of the proposed method.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.182-188
• /
• 2000

High-frequency electric resistance welding (HERW) technique is one of the most productive manufacturing method currently available for pipe and tube production because of its high welding speed. In this process, a heat input is controlled by skilled operators observing color and shape of bead but such a manual control can not provide reliability and stability required for manufacturing pipes of high grade quality because of a variety of bead shapes and noisy environment. In this paper, in an effort to provide reliable quality inspection, we propose a neural network-based method for classification of bead shape. The proposed method utilizes the structure of Kohonen network and is designed to learn the skill of the expert operators and to provide a good solution to classify bead shapes according to their welding conditions. This proposed method is implemented on the real pipe manufacturing process, and a series of experiments are performed to show its effectiveness.