• 디지털융복합연구
• /
• 제16권1호
• /
• pp.317-325
• /
• 2018

팀 활동은 학생들의 문제해결 능력 배양과 팀워크의 학습을 위해 유용하다. 팀 활동이 좋은 결과로 마무리되는 것은 학생들의 성공경험 획득을 위해 중요한데, 특히 융 복합 교과에서는 더욱 그러하다. 본 연구에서는 대학 교과에서의 팀 활동에 있어 주어진 프로젝트 기한이 만료되기 전에 팀이 해체되는 경우에 대해 분석하고자 하였다. 팀의 해체가 팀원의 성격에 바탕을 두고 있다는 가정 하에 팀 해체의 요인이 되는 성격으로서 Dark Triad(DT)를 도입하였고 이를 방어하는 성격 요소로서 융화성을 도입하여 팀 해체 모형을 제안하였다. 제안된 모형은 에이전트 기반의 시뮬레이션을 통해 모의실험을 하였고 그 결과를 분석하였다. DT를 소유한 학생의 비율은 팀의 제한 인원과 팀의 해체율에 영향을 미치지만 팀원의 융화성을 높임으로 인해 팀의 해체율을 낮출 수 있음이 확인되었다. 개발한 모형은 팀의 해체와 관련된 연구에 기초로 제공될 수 있으며 팀 활동을 에이전트 기반의 시뮬레이션으로 접근한 방법론의 활용은 향후 팀 활동을 분석하고 지원하는데 유용하리라 기대한다.

• Journal of Pharmaceutical Investigation
• /
• 제38권2호
• /
• pp.111-117
• /
• 2008

To overcome the solubility of poorly water-soluble drug, the formation of solid dispersion using a spray-dryer with polymeric material, that can potentially enhance the dissolution rate extend of drug absorption was considered in this study. $Eudragit^{(R)}$ E100 as carrier for solid dispersion is acrylate copolymer that soluble in acidic buffer solutions (below pH 5.0). It was used to increase dissolution of atorvastatin calcium as a water-insoluble drug in acidic environments. In this study, a spray-dryer was used to prepare solid dispersion of atorvastatin calcium and $Eudragit^{(R)}$ E100 for purpose of improving the solubility of drug. Atorvastatin calcium and $Eudragit^{(R)}$ E100 were dissolved in ethanol and spray-dryed. DSC and XRD were used to analyze the crystallinity of the sample. It was found that atorvastatin calcium is amorphous in the $Eudragit^{(R)}$ E100 solid dispersion. FT-IR was used to analyze the salt formation by interaction between atorvastatin calcium and $Eudragit^{(R)}$ E100. Comparative dissolution study exhibited better dissolution characteristics than the commercial drug ($Lipitor^{(R)}$) as control. The dissolution rate of atorvastatin calcium was markedly increased in solid dispersion system in simulated gastric juice (pH 1.2). This study proposed that this solid dispersion system improved the bioavailability of poorly water-soluble atorvastatin calcium.

• Journal of Pharmaceutical Investigation
• /
• 제38권4호
• /
• pp.249-254
• /
• 2008

Solid dispersions of poorly water-soluble drug, atorvastatin, were prepared with Eudragit L100 to improve the solubility by spray dryer. To investigate the correlation between physicochemical properties and dissolution rate of solid dispersions, the samples were characterized by scanning electron microscopy (SEM), differential scanning calorimeter (DSC) and fourier transform infrared spectroscopy (FT-IR). SEM and DSC were found that atorvastatin is amorphous in the Eudragit L100 solid dispersion. FT-IR was used to analyze the salt formation by interaction between atorvastatin and Eudragit L100. The dissolution rate of solid dispersed atorvastatin was markedly increased compared to drug powder in stimulated intestinal juice (pH 6.8). Thus, the solid dispersed atorvastatin using the spray drying method with Eudragit L100 may be effective for the bioavailability.

• Journal of Pharmaceutical Investigation
• /
• 제40권3호
• /
• pp.181-185
• /
• 2010

The objective of this study was to improve the extent of drug release as well as the dissolution rate of TD49, a novel algicidal agent, via the preparation of solid dispersion (SD). Among the various carriers tested, $Solutol^{(R)}$ HS15 was most effective to enhance the solubility of TD49. Subsequently, SDs of TD49 were prepared by using $Solutol^{(R)}$ HS15 and their solubility, dissolution characteristics and drug crystallinity were examined at various drug-carrier ratios. Solubili ty of TD49 was increased significantly in accordance with increasing the ratio of $Solutol^{(R)}$ HS15 in SDs. Compared to untreated powders and physical mixtures (PMs), SDs facilitated the faster and greater extent of drug release in water. Particularly, SD having the drug-carrier ratio of 1:20 exhibited approximately 90% of drug release within 1 hr. Differential scanning calorimetry (DSC) thermograms and X-ray diffraction (XRD) patterns suggested that SDs might enhance the dissolution of TD49 by changing the drug crystallinity to an amorphous form in addition to the increased solubilization of drug in the presence of $Solutol^{(R)}$ HS15. In conclusion, SD using $Solutol^{(R)}$ HS15 appeared to be effective to improve the extent of drug release and the dissolution rate of poorly water soluble TD49.

• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.1-5
• /
• 2007

Solid dispersions of piroxicam were prepared by melting method using poloxamer as a carrier. The results of DSC and XRD studies showed that the amorphous farm of piroxicam coexisted with the crystalline form in the solid dispersions. However, the ratio of crystalline form of piroxicam in the solid dispersion prepared by melting method decreased in comparison with the same ratio of the solid dispersion prepared by solvent method. As the ratio of poloxamer in the solid dispersion increased, the ratio of the amorphous form of piroxicam in the solid dispersion increased. The dissolution rate of piroxicam from the solid dispersions was significantly higher than that from piroxicam powder. In comparison to the solid dispersion prepared by solvent method, the dissolution rate of piroxicam from the solid dispersion prepared by melting method was higher. As the ratio of poloxamer in the solid dispersion prepared by melting method increased, the initial dissolution rate decreased, however, the total amount dissolved at the end of the study increased.

• KSBB Journal
• /
• 제26권4호
• /
• pp.283-292
• /
• 2011

Solid dispersion is one of well-established pharmaceutical techniques to improve the dissolution and consequent bioavailability of poorly water soluble drugs. It is defined as a dispersion of drug in an inert carrier matrix. Solid dispersions can be classified into three generations according to the carrier used in the system. First and second generations consist of crystalline and amorphous substances, respectively. Third generation carriers are surfactant, mixture of polymer and surfactants, and mixture of polymers. Solid dispersions can be generallyprepared by melting method and solvent method. While melting method requires high temperature to melt carrier and dissolve drug, solvent method utilizes solvent to dissolve the components. The improvement in dissolution through solid dispersions is attributed to reduction in drug particle size, improvement in wettability, and/or formation of amorphous state. The primary characteristics of solid dispersions, the presenceof drug in amorphous state, could be determined by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and fourier-transformed infrared spectroscopy (FTIR). In spite of the significant improvement in dissolution by solid dispersion technique, some drawbacks have limited the commercial application of solid dispersions. Thus, further studies should be conducted in a direction to improve the congeniality to commercialization.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.256-263
• /
• 2012

We studied the degradation phenomenon of Pt catalyst in PEMFC. We used the electron microscope analysis technique including the ultra-microtome pretreatment method, FEG-SEM and TEM analysis methods for analysis of Pt nanoparticles. The Pt catalyst degradation is observed not only in electrode site but also in membrane site. We investigated these various degradation phenomena. The cathode electrode layer thickness is reduced. The size of the catalyst is increased much larger than initial size in membrane site. The catalyst moved from electrode layer to the electrolyte membrane. The rounded shape of catalyst was changed to the polygon. As a result, we found that the catalyst degradation processes of migration and coarsening occurred by the followings mechanisms; (1) dissolution of Pt ; (2) diffusion of Pt ion ; (3) Pt ion chemical reduction in membrane; (4) Coarsening of Pt particles (Ostwald ripening) ; (5) polygon shape change of Pt by {111} plane growth.

• Corrosion Science and Technology
• /
• 제9권5호
• /
• pp.216-222
• /
• 2010

Most of the thirteen substations in operation in the metropolitan area were installed around the year 2000, and since water cooling methods are used to directly withdraw heat from transformer oils, a stable supply of electric power is required through optimal maintenance of facilities. The water cooling tower installed outdoors, which uses the water supply as sprinkler water, experiences the most problems. Since more than 90% of the cooling water is reused, the dissolved composition in the water becomes concentrated due to long operating hours, and impurities dissolve in the water due to air flowing in from the outside, forming hard scales on the outer surface of the cooling tube, and in extreme cases, reacting with the tube material composition, leading to corrosion. As a result, not only is cooling efficiency lowered, but in extreme cases the cooling tube must be replaced. In this study, the characteristics and composition of the scales formed on the cooling tube were analyzed and corrosion characteristics of material types were identified in order to find an efficient maintenance method for cooling tubes. In addition, the degree of dissolution of various chemicals were investigated during the removal of scales that have been formed.

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.471-481
• /
• 2005

In Korea, generic drug and bioequivalence test are the hot issues since a new medical system of separation of dispensary from medical practice was started in 2000. The KFDA(Korea FDA) had revised several times ${\ulcorner}Guidance\;for\;bioequivalence\;test{\lrcorner}$. In vitro dissolution test has been extensively used as a quality control tool for solid oral dosage forms. In an effort to minimize unnecessary human testing, in vitro/in vivo correlations (IVIVC) between in vitro dissolution and in vivo bioavailability are increasingly becoming an integral part on extended release drug product development. The recently published US guidance, ${\ulcorner}Extended\;release\;oral\;dosage\;forms\;:\;development,\;evaluation,\;and\;application\;of\;in\;vitro/in\;vivo\;correlations{\lrcorner}$ will be helpful for us to make our own guideline.

• 분석과학
• /
• 제14권4호
• /
• pp.317-323
• /
• 2001

아크릴로니트릴을 제조하기 위한 가암모니아 산화(ammoxidation) 공정에 쓰이는 몬산토 촉매의 용해방법을 연구하였다. 실리카가 지지체인 이 촉매는 마이크로파 용해장치를 이용하여 염산, 플루오르화 수소산 및 과산화수소의 혼합산으로 녹이는 것이 가장 효과적이었다. 이 장치로 녹일 때 용기 내의 압력이 높아 안전장치가 작동될 경우, 규소는 휘발할지라도 안티몬, 몰리브덴, 철, 비스무트 및 우라늄은 휘발하지 않았다. 유도결합 플라스마 원자방출분광법으로 측정한 결과 $SiO_2$ $50.5{\pm}0.4%$, $Sb_2O_3$ $29.6{\pm}0.6%$, $UO_2$ $10.2{\pm}0.1%$, $Fe_2O_3$ $6.1{\pm}0.1%$, $MoO_3$ $0.73{\pm}0.01%$ 및 $Bi_2O_3$ $0.49{\pm}0.01%$이었으며, 기준 값과의 상대 오차는 비스무트를 제외하고 모두 ${\pm}10%$ 이내였다.