• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.22-28
• /
• 2015

본 논문에서는 연판정 간섭 소거 최소 자승-오류(soft interference cancellation and minimum mean squared-error; SIC-MMSE) 방법을 이용한 새로운 에너지 효율적 다중안테나(multi-input multi-output; MIMO) 검출 기법을 소개한다. SIC-MMSE 방법의 가장 큰 계산 복잡도는 복소 행렬에 대하여 안테나 개수 만큼의 여러 번 역행렬 계산을 해야 하는데 있다. 본 논문에서는 행렬에 대한 테일러 시리즈 확장(Taylor series expansion) 기법을 이용하여 안테나 개수에 상관없이 단 한번의 역행렬 계산만을 필요로 하는 방법을 제안하며, 이와 같은 방법을 이용하여 계산의 복잡도를 감소시킬 수 있다. 본 논문에서 제안한 기법의 복잡도 감소 효과는 안테나 개수가 증가함에 따라 더 크게 나타난다. 본 논문에서 제시한 시뮬레이션 결과를 통하여 제안한 기법이 기존의 SIC-MMSE 기법에 비하여 더 적은 복잡도로 거의 동일한 성능을 도출할 수 있음을 알 수 있다.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.8-16
• /
• 2006

This paper discusses design sensitivity analysis and its application to a structural dynamics modification. Eigenvalue derivatives are determined with respect to the element parameters, which include intrinsic property parameters such as Young's modulus, density of the material, diameter of a beam element, thickness of a plate element, and shape parameters. Derivatives of stiffness and mass matrices are directly calculated by derivatives of element matrices. The first and the second order derivatives of the eigenvalues are then mathematically derived from a dynamic equation of motion of FEM model. The calculation of the second order eigenvalue derivative requires the sensitivity of its corresponding eigenvector, which are developed by Nelson's direct approach. The modified eigenvalue of the structure is then evaluated by the Taylor series expansion with the first and the second derivatives of eigenvalue. Numerical examples for simple beam and plate are presented. First, eigenvalues of the structural system are numerically calculated. Second, the sensitivities of eigenvalues are then evaluated with respect to the element intrinsic parameters. The most effective parameter is determined by comparing sensitivities. Finally, we predict the modified eigenvalue by Taylor series expansion with the derivatives of eigenvalue for single parameter or multi parameters. The examples illustrate the effectiveness of the eigenvalue sensitivity analysis for the optimization of the structures.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.83-91
• /
• 2018

In this study, we investigated the dynamic stability of the system and the semi-analytical solution of the shallow arch. The governing equation for the primary symmetric mode of the arch under external load was derived and expressed simply by using parameters. The semi-analytical solution of the equation was obtained using the Taylor series and the stability of the system for the constant load was analyzed. As a result, we can classify equilibrium points by root of equilibrium equation, and classified stable, asymptotical stable and unstable resigns of equilibrium path. We observed stable points and attractors that appeared differently depending on the shape parameter h, and we can see the points where dynamic buckling occurs. Dynamic buckling of arches with initial condition did not occur in low shape parameter, and sensitive range of critical boundary was observed in low damping constants.

• Communications for Statistical Applications and Methods
• /
• 제15권2호
• /
• pp.147-159
• /
• 2008

We consider using ranked set sampling methods to draw inference about the three well-known measures of overlap, namely Matusita's measure $\rho$, Morisita's measure $\lambda$ and Weitzman's measure $\Delta$. Two exponential populations with different means are considered. Due to the difficulties of calculating the precision or the bias of the resulting estimators of overlap measures, because there are no closed-form exact formulas for their variances and their exact sampling distributions, Monte Carlo evaluations are used. Confidence intervals for those measures are also constructed via the bootstrap method and Taylor series approximation.

• 한국해안·해양공학회논문집
• /
• 제20권3호
• /
• pp.277-290
• /
• 2008

경도 $14^{\circ}$ 범위보다 넓은 구역에 대한 UTM 좌표변환을 위하여 12차 Taylor 전개에 의한 새로운 변환식을 유도하였고 이는 Thomas(1952)의 식을 확장한 것임을 보였다. WGS84와 UTM 좌표의 상호변환에 대한 계산 결과를 나타내었고 차수에 따른 수렴의 정도도 분석하였다. 본 변환식은 우리나라 주변의 조석 또는 지진해일과 같은 장주기 파랑의 전파를 위한 수치모형의 직교좌표 격자구성에 사용될 수 있다.

• 한국농공학회지
• /
• 제42권6호
• /
• pp.106-114
• /
• 2000

In order to evaluate the shear characteristics of undisturbed weathered granite soil which is a typical residual soil in Korea, the mechanical properties are first investigated and discussed by carrying out a series of direct shear test and then dilatancy correction is performed by using Taylor’s correction equation. In this study, specimens are sampled at Pungam(-3, -8, -13m below ground surface), Kwangju and Iksan(-5m below ground surface), Jeonbuk. The test results are summarized as follows: 1) Mohr-Coulomb failure criterion is not linear under the low confining pressure. 2) The value of cohesion is smaller than usually determined value in low pressure region. 3) The value of strength parameter c and ø which are corrected by Taylor’s correction equation is a little bit small.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.566-570
• /
• 2005

A digital controller for nonlinear time-delay system is proposed in this paper. A nonlinear time-delay system is discretized by using Taylor's discretization method. And the discretized system can be converted to a general nonlinear system. For this reason, general nonlinear controller synthesis can be applied to the discretized time-delay system. We adopted MAC controller synthesis for this study. Computer simulations are conducted to verify the performance of the proposed method. The results of simulation show good performance of the proposed controller synthesis and the proposed method is useful to control nonlinear time-delay system easily.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.377-384
• /
• 2007

This paper studies on the relation between linearization methods and controller gains in the looper ILQ(lnverse Linear Quadratic optimal control) system for hot strip finishing mills. Firstly, two linear models arc respectively derived by a linearization method using Taylor's series expansion and a static state feedback linearization method, respectively, and the linear models are compared with the nonlinear model. Secondly, the looper servo controllers are respectively designed on the basis of two linearization models. Finally, the relation between the performances of two ILQ servo controllers and the linearization methods, and the structures and control gains of two controllers are evaluated by a computer simulation.

• 대한토목학회논문집
• /
• 제26권2A호
• /
• pp.383-390
• /
• 2006

본 연구에서는 급수전개를 이용한 추계론적 유한요소해석법의 개선을 위한 등가몬테카를로 추계장함수를 제안하고 1차 Taylor전개를 이용한 추계론적 유한요소해석법인 가중적분법에 적용하였다. 일반적으로 1차 Taylor전개를 이용하는 수치해석법에서의 응답변화도는 고려하고 있는 추계장의 분산계수에 대하여 선형거동을 보인다. 그러나 몬테카를로 해석의 경우 추계장 분산계수에 대하여 비선형 거동을 나타낸다. 이는 급수전개법의 1차 Taylor전개에 따른 선형특성에 기인한다. 따라서, 가중적분법에서 사용되는 Taylor전개된 변위벡터와 몬테카를로 해석에서의 변위벡터를 비교하고 이들 두 변위벡터 사이에 상호 불일치 하는 점을 고찰하여 몬테카를로 해석에서의 변위벡터와 등가의 변위벡터를 구성하고 이를 가중적분법에 적용하였다. 제안한 등가몬테카를로 추계장은 본래의 추계장 함수에 대한 고차함수로 주어진다. 평면구조에 대한 수치해석을 통하여 제안한 등가몬테카를로 추계장을 이용한 정식화의 타당성을 고찰하였다 새로운 정식화는 기존의 l차 가중적분법을 위한 정식화 과정과 유사하게 수행할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.172-181
• /
• 1999

Series expansion methods to compute the exponential of a matrix have been compared by applying them to fuel depletion calculations. Specifically, Taylor, Pade, Chebyshev, and rational Chebyshev approximations have been investigated by approximating the exponentials of bum matrices by truncated series of each method with the scaling and squaring algorithm. The accuracy and efficiency of these methods have been tested by performing various numerical tests using one thermal reactor and two fast reactor depletion problems. The results indicate that all the four series methods are accurate enough to be used for fuel depletion calculations although the rational Chebyshev approximation is relatively less accurate. They also show that the rational approximations are more efficient than the polynomial approximations. Considering the computational accuracy and efficiency, the Pade approximation appears to be better than the other methods. Its accuracy is better than the rational Chebyshev approximation, while being comparable to the polynomial approximations. On the other hand, its efficiency is better than the polynomial approximations and is similar to the rational Chebyshev approximation. In particular, for fast reactor depletion calculations, it is faster than the polynomial approximations by a factor of ∼ 1.7.