• The Journal of Asian Finance, Economics and Business
• /
• 제4권3호
• /
• pp.57-73
• /
• 2017

In the current competitive marketplace of real estate business, tenant satisfaction measurement is one of the important indicators to monitor competitiveness in industrial property development. It has become an industry standard to measure tenant satisfaction, commonly called customer satisfaction. Customer satisfaction has become the widely used metric to manage customer loyalty (Keiningham, Gupta, Aksoy, & Buoye, 2014). The aim of this research is to determine the impact of property management services on tenants' satisfaction with the three identified variables i.e. facility management, perceived quality and lease management. Structural equation modeling (SEM) is applied to build constructs and test the hypotheses with the collected survey samples. Of the three variables, facility management is the most influential factor that leads to tenant satisfaction with industrial buildings. Next, perceived quality is another important factor that contributes to tenants' pleasure. Compared with these two, lease management fares worse, having the least extensive effect on tenant satisfaction, and could be disregarded. The ultimate impact of tenant satisfaction is about tenant retention and recommendation. The overall findings of this research will potentially help real estate developers to develop a better property management system, leasing program and tenant retention strategy.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.495-506
• /
• 2013

본 연구에서는 전단류 분산이 이송과 난류에 의한 확산의 결합에 의해 발생한다는 Taylor (1954)의 가정을 바탕으로 개념적 모형을 구성하고, 이를 3차원 개수로에 적용하여 오염물질의 혼합과정을 재현할 수 있는 시간분리 혼합모형(Time-split Mixing Model; TMM)을 개발하였다. 개발된 모형은 연산자 분리 기법(operator split method)과 유사하게 혼합과정을 종방향 혼합과 횡방향 혼합으로 분리하고, 유속 연직편차에 의한 농도분리과정과 난류확산에 의한 연직방향 혼합과정을 순차적으로 반복 계산함으로써 2차원 이송-분산을 재현한다. 수치모의 결과, 제안된 모형은 수로벽면에 의한 농도중첩 효과를 잘 반영하고 있으며, Taylor 구간 내에서 2차원 이송-분산 모형의 해석해와 거의 일치하고 있음을 확인하였다(Chatwin, 1970). 본 모형은 하상경사, 하폭 대 수심 비, 혼합시간 등의 변화에 따라 분산 정도를 달리 재현하고 있으며, 산정된 종분산계수는 Elder(1959)가 제안한 상수값과는 달리 혼합시간에 따라 변화하는 양상을 나타냈다. 횡분산계수의 경우, Sayre와 Chang(1968), Fischer 등(1979)이 실험을 통해 제시한 값과 유사한 범위를 나타냈다.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.85-90
• /
• 1990

Berger formulation was used to calculate the dose distribution of $^{60}$ Co source in tissue. $^{60}$ Co source was supposed as point source. The effect of the stainless-steel around the source was considered and Taylor Approximation Method was used for calculating exposure build-up factor. Calculated depth dose data was compared with measured data which was measured by the ionization chamber.

• Communications for Statistical Applications and Methods
• /
• 제20권5호
• /
• pp.395-404
• /
• 2013

This paper studies the skewness of the absolute value GARCH(1, 1) models with Gaussian mixture innovations (Gaussian mixture AVGARCH(1, 1) models). The maximum estimated-likelihood estimator (MELE) employed (a two- step estimation method in order to estimate the skewness of Gaussian mixture AVGARCH(1, 1) models. Through the real data analysis, the adequacy of adopting Gaussian mixture innovations is exhibited in reflecting the skewness of two major Korean stock indices.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.1-9
• /
• 2012

동축형 다공성재 분사기에서는 중심 액체제트 주위를 둘러싼 원통형 다공성재의 내부 표면에서 반경방향으로 분사된 기체가 중심액체제트와 상호작용을 하게 된다. 표면분사된 기체제트는 반경방향에서 축방향으로 발달하며, 그 과정에서 액체분무의 중심부까지 운동량을 효과적으로 전달하여 미립화 및 혼합 성능을 향상시킨다. 본 연구에서는 기체분사 면적 및 기체분사 질량유량을 변화시켜 각각 운동량 비 및 웨버수의 크기를 조절하였으며, 이에 따른 물-공기 모사추진제 수류시험에서의 분무특성에 대한 고찰을 수행하고 동일 스케일의 전단 동축형 분사기와의 비교 분석이 이루어졌으며, 동축형 다공성재 분사기에서 반경방향으로의 기체분사가 2상유체의 미립화/혼합에 긍정적인 영향을 주는 것으로 판단된다.

• Journal of Astronomy and Space Sciences
• /
• 제24권4호
• /
• pp.417-430
• /
• 2007

IGS(International GNSS Service) 산출물 생성에 사용되는 지상국의 선정은 산출물 정밀도에 영향을 미칠 수 있는 중요한 과정이다. 지상국 선정에 있어서 지상국 자료의 품질이 좋지 않은 지상국들은 제외시켜야 하며, 전 지구적으로 고른 분포를 갖도록 선정해야 한다. 이 연구에서는 12개의 지상국 망을 이용하여 GPS 위성의 궤도력을 산출하고 지상국 선정이 GPS 위성의 궤도력 산출에 미치는 영향을 분석하였다. 지상국의 성능을 판단하기 위해 자료의 품질을 조사하였으며, 관측개수, 사이클 슬립 개수 및 L1, L2에 대한 의사거리의 다중경로 오차를 고려하였다. 고른 지역분포를 갖는 지상국 선정을 위해서 SOD(Second Order Design) 방법을 사용하여 Taylor-Karman 구조로부터 정의되는 기준 행렬과 여행렬(cofactor matrix)의 차이가 가장 작도록 지상국들을 선정하였다.

• 복합신소재구조학회 논문집
• /
• 제1권2호
• /
• pp.29-35
• /
• 2010

탄성계수와 함께 포아송비는 구조의 거동을 결정하는 중요 구조인수중의 하나이다. 따라서 구조응답의 불확실성에 미치는 포아송비의 독립적 영향에 대한 평가가 필요하다. 본 연구에서는 포아송비의 불확실성이 복합적층판의 거동에 미치는 영향을 산정하기 위한 정식화를 제안한다. 포아송비의 영향은 동일 차수인 임의인수의 영향을 포함하는 부행렬을 통하여 얻을 수 있으며, 이는 대상 인수의 평균을 중심으로 한 Taylor전개를 통하여 구할 수 있다. 제안방법의 검증을 위하여 예제 평판을 해석하였고, 그 결과를 몬테카를로 해석에 의한 결과와 비교하였다. 두 방법을 통하여 얻은 결과는 상화 잘 일치하는 결과를 나타내어, 제안한 방법이 적절함을 제시하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.

• The Journal of Korean Physical Therapy
• /
• 제21권2호
• /
• pp.1-8
• /
• 2009

Purpose: This study examined the effect of EMG-stim related to the functional recovery of the upper extremity in chronic stroke patients with an intensive massed practice protocol. Methods: The subjects were assigned randomly to either the EMG-stim group (n=10) or sham treatment group (n=10). Both groups received conventional physical therapy, occupational therapy and FES, five times per week over a four week period. In the EMG-stim group, EMG-stim was applied to the hemiplegic wrist and finger extensors for 2 sessions for 30 minutes per day, 5 times per week over a 4 week period. As the pre- and the post-test, the following four motor tests were assessed as the function of the upper extremity clinical functional test: extensor digitorum strength test, Box and Block test, Fugl-Mayer Assessment, and Jebson-Taylor Hand Function Test. Results: In the Box and Block test and Fugl-Mayer Assessment, there were statistically significant differences between both groups as well as between pre- and post-test. The extensor digitorum and wrist extensor strength were similar in both groups. In the Jebson-Taylor Hand Function Test, there was a significant difference in simulated page turning but not in the other subtests. Conclusion: Intensive massed practice with EMG-stim intervention applied to the hemiplegic upper extremity is an effective therapeutic method for chronic stroke patients. However, a variety of intervention methods designed for stroke patients in clinical settings are needed.

• The Journal of Korean Physical Therapy
• /
• 제29권2호
• /
• pp.55-61
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of a task-oriented upper arm exercise performed in a sitting position on either an unstable support surface or a stable support surface for children with cerebral palsy. Methods: We prospectively evaluated 18 children with cerebral palsy. Eight subjects were randomly assigned to each of the stable and unstable support surface groups. We performed the upper arm exercise three times a week for 6 weeks. To confirm the effects of the intervention, the berg balance scale test, modified functional reaching test (MFRT), timed up and go test (TUG), and Jebsen-Taylor hand function test were conducted before and after the study. Results: Significant differences were observed in MFRT and TUG between the experimental and control groups (p<0.05). In the Jebsen-Taylor hand function test, there were significant differences between the groups for the items picking up small objects, stacking checkers, lifting large light objects, and lifting large heavy objects (p<0.05), but not for writing and stimulation of feeding. Significant differences were observed between the groups in items of card turning, lifting large light objects, and lifting heavy objects. Conclusion: The purpose of this study was to evaluate the effectiveness of a task-oriented upper extremity exercise program for dynamic balance and hand function performed in a sitting position with either stable or unstable support by cerebral palsy patients. There were improvements in the two groups, but performing the exercise while sitting on an unstable support surface had a greater effect on dynamic balance and hand function than exercise while sitting on a stable supporting surface. The results of this study can be used to improve the daily lives of cerebral palsy patients.