• Clinical and Experimental Reproductive Medicine
• /
• v.10 no.1
• /
• pp.25-37
• /
• 1983

A group of 180 men who visited Urology Department of Severance hospital, including 115 patients with nongonococcal urethritis (N.G.U.), 27 patients with prostatitis, 13 patients with gonococcal urethritis (G.U.) and 25 healthy medical student controls were investigated for the isolation of Ureaplasma urealyticum (T-strain mycoplasma) from the specimen of ureaplasma discharge, urine and semen. Taylor-Robinson media of T-broth and T-agar was used for the isolation of Ureaplasma urealyticum. To the best of our knowledge, the study on the culture of Ureaplasma urealy ticum was reported for the first time in Korea. The followis g results were obtained: 1. The isolation rate of Ureaplasma urealyticum in nongonococcal urethritis (53.0%) revealed highest of those in the other three groups of prostatitis, gonococcal urethritis and control (40.7%,38.4% and 16.0% respectively). 2. As for the specimens, urethral discharge revelaed higher isolation rate of Ureaplasma urealyticum (54.6%) than first voided urine (50.0%). 3. The more consorts patients had, the higher positive culture rate of Ureaplasma urealyticum were revealed. The isolation rate in case of more than one causal in nongonococcal urethritis (27.8%) revealed much higher than in case of marital only (5.2%), one regular (6.1%) and one causal 03.9%). 4. 2.6% of isolation rate of Ureaplasma urealyticum revealed in patients with nongonococcal urethritis who visited the clinic in later than 4 weeks after the symptoms developed. However, the isolation rate in patients who visited within 4 weeks revealed 50.3%. The lower isolation rate of Ureaplasma in the late treatment seekers might be probably due to the suppression effect against Ureaplama urealyticum from the possible previous self antibiotic treatment. 5. Attachment of Ureaplasma urealyticum mostly to the neck and head portion of the spermatozoa seemed to playa role to affect the motility of sperms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.258-258
• /
• 2014

Spark discharge in water generates shockwaves which have been utilized to generate mechanical actuation for potential use in pumping application. Discharge pulses of several microseconds generate shockwaves and vapor bubbles which subsequently displace the water for a period of milliseconds. Through the use of a sealed discharge chamber and metal bellow spring, the fluid motion can be used create an oscillating linear actuator. Continuous actuation of the bellow has been demonstrated through the use of high frequency spark discharge. Discharge in water forms a region of high electric field around the electrode tip which leads to the creation of a thermal plasma channel. This process produces fast thermal expansion, vapor and bubble generation, and a subsequent shockwave in the water which creates physical displacement of the water [1]. Previous work was been conducted to utilize the shockwave effect of spark discharge in water for the inactivation of bacteria, removal of mineral fouling, and the formation of sheet metal [2-4]. Pulses ranging from 25 to 40 kV and 600 to 900 A are generated inside of the chamber and the bellow motion is captured using a slow motion video camera. The maximum displacements measured are from 0.7 to 1.2 mm and show that there is a correlation between discharge energy input to the water and the displacement that is generated. Subsequent oscillations of the bellow are created by the spring force of the bellow and vapor in the chamber. Using microsecond shutter speed ICCD imaging, the development of the discharge bubble and spark can be observed and measured.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.2
• /
• pp.53-58
• /
• 1998

Ekman layer equation with rough-bottom boundary condition has been solved to determine the effect of roughness on the magnitude of Ekman veering. The bottom boundary condition and the flow field were expanded in a power of roughness (h) which is always smaller than the Ekman layer thickness (${\delta}_E$). By changing the magnitude of roughness parameter (h/${\delta}_E$), the magnitude of the veering, which rotates counterclockwise from the interior geostrophic flow, has been computed. At a fixed depth within the Ekman layer, the magnitude of veering increases as the roughness parameter increases. However, the cross-isobar flux turns out to decrease with increasing roughness. To verify the analytic solution, laboratory experiments were carried out. Rough-bottom cylinderical container filled with homogeneous fluid was sit on a rotating table. The flow pattern during the period of steady spin-up shows that the degree of veering coincides well with the analytic results for various roughness parameters.

• The Korean Journal of Rehabilitation Nursing
• /
• v.3 no.1
• /
• pp.15-26
• /
• 2000

This study examined the relationship between the level of hardiness and self-care agency of persons with a colostomy. The purpose of the study was to explore the effect of hardiness on self-care agency of persons with a colostomy and to identity factors influencing on. The ultimate goal was to help nurses improve the person's self-care agency and to contribute theoretical base for the planning of supportive nursing interventions to increase the level of self care. The subjects for the study consisted of 43 persons aged above eighteen below seventy had had Miles operation and permanent colostomy. The data were collected from July, 1998 to September 15, 1998. The instruments used for this study were the Health-Related Hardiness (Pollock, 1984) and the Self-carer As Inventory Scale(Genden & Taylor, 1988). The Self-Carer As Inventory translated by So Hyang-sook and was modified by author of this study. The data were analysed by using SAS computerlized program and included number, percentage, t-test, ANOVA and Pearson Correlation Coefficient. The results of the study are summarized as follows. 1. Hardiness was significantly related to Self-care agency(r=-0.531. p=0.0002). That is, the higher the hardiness, the higher the level of Self-care agency. 2. In the relationship between general characteristics and traits of persons with a colostomy and hardiness were significant difference in monthly income (F=2.79, p=0.03), problem in stoma management (F=3.29, p=0.01). 3. In the relationship between general characteristics and traits of persons with a colostomy and Self-care agency were significant difference in monthly income (F=2.93, p=0.03), problem in stoma management(F=2.93, p=0.01). Therefore, in order to increase the level of Self-care agency of ostomate Nurses should be helpful to provide them with hardiness training to strengthen their control, commitment and challenge(subconcepts of hardiness).

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.51-60
• /
• 1992

This study was performed to investigate the effect of green sorting before drying on the high-temperature drying characteristics of southern yellow pine dimension lumber(2"${\times}$6"${\times}$12'). To test the advantages of weight sorting, green lumber was seperated into heavy(above 55 1b), medium(50-55 1b), and light(below 50 1b)weight classes. Pieces in each weight class were subgrouped into high(above 35%) and low(below 30%) latewood groups. Groups were dried and seperated by a standard commercial high-temperature schedule; dry bulb temperature $245^{\circ}$ F, wet bulb temperature $180^{\circ}$ F, and air velocity 1200fpm. The results obtained were as follows; 1. There was a highly significant correlation between annual rings per inch(X) and percent-latewood(Y). The regression equation was Y=24, 5047+1.3272X. 2. There were highly significant correlations between either annual rings per inch($X_1$) or percent-latewood($X_2$) a.d specific gravity in green wood(Y). Their regression equations were Y=0.4260+0.0081$X_1$ and Y=0.3749+0.0029$X_2$, respectively. 3. Heavier weight charges dried more slowly than lighter weight charges. 4. Board-to-board variation in green or dry moisture content was less for all seperate weight classes than for unseperated control charges. 5. Lower latewood pieces had higher initial moisture content than higher latewood pieces, and then drying time for lower late wood pieces was longer than higher latewood pieces.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.101-112
• /
• 2013

Large eddy simulation was performed to investigate the effect of linearly increasing wall disturbance on the modification of turbulent characteristics of temperature field in the vicinity of the wall. It was noted that temperature variance increased monotonically whereas temperature dissipation decreased significantly, resulting in a noticeable reduction in both time and length-scales. A sudden drop in turbulent Prandtl number down to around 0.25 in the near-wall region indicated that the similarity between velocity and temperature fields decreases near the wall as a result of linear wall disturbance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.540-546
• /
• 1992

Turbulent Couette flow between coaxial cylinders with inner one rotating has been investigated experimentally and numerically. The radius ratio of the coaxial cylinders is 0.43. Mean velocity and turbulent stresses have been measured by hot-wire anemometer in the range of Reynolds number based on the velocity at rotating wall and the radial distance between walls, 60,900-187,000. For the numerical computation, the Reynolds stress model has been used as a turbulence closure model. Measurements of mean velocity show that the velocity profile of wall layer largely deviates from universal logarithmic law due to the effect of streamline curvature, especially in the region near the stationary outer cylinder. The results computed with the Reynolds stress model agree well with the experimental data in the prediction of circumferential intensity of turbulent fluctuations. However, the computed level of radial intensity is much higher than the measurement. Curvature-corrected versions of the Reynolds stress model improves the prediction of turbulent intensities, but the results are not fully satisfactory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.458-458
• /
• 2017

증발산은 지표면으로부터의 증발이나 식물에 의한 증산에 의해 유역으로부터 물이 제거되는 주요 기작으로서, 유역 물수지 관점에서 보았을 때 강수량과 증발산량의 차이로부터 유출이나 함양되는 양을 추정할 수 있다. 제주도의 경우에는 수자원 이용량의 약 84%를 지하수에 의존하고 있으며, 한편으로 제주도의 지질학적 특성으로 인해 일정 규모 이하의 강수량은 지표유출이나 중간유출의 과정없이 대부분 지하로 침투되기 때문에, 증발산량을 정확하게 파악하는 것이 지하수 함양량의 추정과 제주도 전체 수자원 계획에 큰 영향을 주게 된다. 정확한 증발산량 파악을 위해서는 지속적인 관측과 전문적인 계측장비 등에 의한 직접적인 방법이 있으나 광범위한 유역 단위의 관측값을 확보하는 것이 현실적으로 어렵기 때문에, 물수지법, 열수지법, 공기역학적방법 및 조합방법 등의 간접적인 방법이 많이 활용되고 있다. 간접적인 방법으로 많이 활용되고 있는 Penman-Monteith 법은 일 단위 기반의 정확도 높은 증발산량을 추정할 수 있는 장점이 있으나, 작물생육단계 및 토양수분, 기상 등 많은 변수들에 대한 입력을 요구하고 있기 때문에 복잡한 모델링 과정을 수반하게 되는 단점을 내포하고 있다. 반면, Morton (1978)의 CRAE (Complementary Relationship Areal Evapotranspiration)나 Priestly and Taylor (1973)의 AA (Advection-Aridity)와 같이 잠재증발산량과 실제증발산량간의 보완관계를 이용하는 방법은 지역적인 인자 또는 가용 수분에 대한 조건없이 몇 가지 기상자료만으로 유역의 증발산량을 산정할 수 있다는 장점이 있다. 본 연구에서는 제주도 지역의 4개 하천유역(한천, 천미천, 강정천, 외도천)을 대상으로, Penman-Monteith 법을 적용한 SWAT 모델링를 통해 얻어진 유역의 실제증발산량과 잠재증발산량으로부터, 고도에 따른 기상특성을 반영하여 증발산 보완관계를 검토하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.61-67
• /
• 2022

A metal salt solution was prepared from valuable metals (Ni, Co, Mn) recovered from a scrap of waste lithium secondary batteries, and an NCM811 precursor was synthesized from the solution. The effect on precursor formation according to reaction time was confirmed by SEM, PSA, and ICP analysis. Based on the analysis results, the electrochemical properties of the synthesized NCM811 precursor and the commercial NCM811 precursor were investigated. The Galvano charge-discharge cycle, rate performance, and Cycle performance were compared, and as a result, there was no significant difference from commercial precursors.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.99-117
• /
• 2023

The crack under the influence of the higher intensities of the stresses grows and the structure gets collapsed with the time when the crack length reaches to critical value. Therefore, the fracture behavior of a structure in terms of stress intensity factors (SIF) becomes important to determine the remaining fracture strength and capacity of material and structure for avoiding catastrophic failure, increasing safety and further improvement in the design. The robustness of the method has been demonstrated by comparing the numerical results with analytical and experimental results of some problems. XFEM is used to model cracks and holes in structures and predict their strength and reliability under service conditions. Further, XFEM is extended with a stochastic method for predicting the sensitivity in terms of output COVs and fracture strength in terms of mean values of stress intensity factors (SIFs) of a structure with discontinuities (cracks and holes) under tensile loading condition with input individual and combined randomness in different system parameters. In stochastic technique, the second order perturbation technique (SOPT) has been used for the predicting the fracture behavior of the structures. The stochastic/perturbation technique is also known as Taylor series expansion method and it provides the reliable results if the input randomness is less than twenty percentage. From the present numerical analysis it is observed that, the crack tip near to the hole is under the influence of the stress concentration and the variational effect of the input random parameters on the crack tip in terms of the SIFs are lesser so the COVs are the less sensitive. The COVs of mixed mode SIFs are the most sensitive for the crack angles (α=45° to 90°) for all the values of c₁ and d₁. The plate with the shorter distance between hole and crack is the most sensitive with all the crack angles but the crack tip which is much nearer to the hole has the highest sensitivity.