• International Journal of Fluid Machinery and Systems
• /
• 제8권4호
• /
• pp.304-310
• /
• 2015

Numerical simulation was applied to investigate the Taylor vortex flow inside the concentric cylinders with a constant radial temperature gradient. The reliability of numerical simulation method was verified by the experimental results of PIV. The radial velocity and temperature distribution in plain and 12-slit model at different axial locations were compared, and the heat flux distributions along the inner cylinder wall at different work conditions were obtained. In the plain model, the average surface heat flux of inner cylinder increased with the inner cylinder rotation speed. In slit model, the slit wall significantly changed the distribution of flow field and temperature in the annulus gap, and the radial flow was strengthen obviously, which promoted the heat transfer process at the same working condition.

• Journal of the Korean Data and Information Science Society
• /
• 제25권2호
• /
• pp.431-438
• /
• 2014

Type I hybrid censoring scheme is the combination of the Type I and Type II censoring scheme introduced by Epstein (1954). Epstein considered a hybrid censoring sampling scheme in which the life testing experiment is terminated at a random time $T^*$ which is the time that happens rst among the following two; time of the kth unit is observed or time of the experiment length set in advance. The likelihood function of this scheme from the Rayleigh distribution cannot be solved in a explicit solution and thus we approximate the function by the Taylor series expansion. In this process, we propose four dierent methods of expansion skill.

• 소성∙가공
• /
• 제16권4호
• /
• pp.276-281
• /
• 2007

The hardening and the constitutive equation based on the crystal plasticity are introduced for the numerical simulation of hemispherical sheet metal forming. For calculating the deformation and the stress of the crystal, Taylor's model of the crystalline aggregate is employed. The hardening is evaluated by using the Taylor factor, the critical resolved shear stress of the slip system, and the sum of the crystallographic shears. During the hemispherical forming process, the texture of the sheet metal is evolved by the plastic deformation of the crystal. By calculating the Euler angles of the BCC sheet, the texture evolution of the sheet is traced during the forming process. Deformation texture of the BCC sheet is represented by using the pole figure. The comparison of the strain distribution and punch force in the hemispherical forming process between the prediction using crystal plasticity and experiment shows the verification of the crystal plasticity-based formulation and the accuracy of the hardening and constitutive equation obtained from the crystal plasticity.

• 한국ITS학회 논문지
• /
• 제3권1호
• /
• pp.75-83
• /
• 2004

본 논문에서는 ITS 서비스 구성 요소 중의 하나인 ETCS(Electronic Toll Collection tsystem)에서 RSE(Road Side Equipment) 기지국 gantry에 장착되어 이동체와 무선 통신 링크를 연결해 주는 ETCS 기지국유 안테나를 설계 및 제작하고 그 특성을 측정하였다. ETCS 기지국용 안테나 특성은 적은 부엽 특성과 도로 상황과 이동체 탑재되는 OBU 위치에 따라 특정 형태의 빔 패턴이 요구된다. 또한 반사에 의한 multipath 신호 영향을 최소화하기 위해 원형편파 특성이 요구된다. 저 부엽의 빔 패턴을 얻기 위해 배열 패치 구조와 Taylor distribution에 의한 방사요소의 전류 weighting factor를 적용하였다. 제작된 안테나의 동작 중심 주파수는 5.8GHz이고, 반사손실은 -10 dB를 기준으로 130 MHz, 10MHa사용 대역내에서 축비 2.6 dB이하의 RHCP 편파 특성과 17 dBi 이득을 얻었으며, 빔 패턴은 시뮬레이션 결과와 측정 결과가 잘 일치하고 있음을 보여주었다.

• 대한원격탐사학회지
• /
• 제28권5호
• /
• pp.521-529
• /
• 2012

본 연구에서는, 수문순환과정의 중요한 요소인 증발산의 지역적 특성을 고려한 정확한 산정을 위하여 Moderate Resolution Imaging Spectroradiometer (MODIS) 인공위성 데이터를 이용한 원격탐사 기술을 적용하였다. Priestley-Taylor 방법으로 한반도 전역에서의 잠재 증발산을 산정하고 공간적인 거동을 파악하고자 하였다. 산정된 잠재 증발산을 바탕으로 낙동강 유역의 기상청 증발접시 증발량과 비교를 통해 지역적인 적용성을 확인하였다. 포항 기상대에서는 소형 증발접시 0.70, 대형 증발접시 0.55의 상관 계수를 가지며, 문경 기상대의 결과는 소형 증발접시 0.62, 대형 증발접시 0.52의 상관 계수를 갖는다.

• 융합정보논문지
• /
• 제11권11호
• /
• pp.51-56
• /
• 2021

본 논문에서는 cross-eye의 두 재밍 안테나의 진폭 불일치로 인한 성능 저하를 고려한다. 진폭비의 불일치는 기계적 결함에 따른 실제 진폭비와 명목상 진폭비의 차이가 정규분포를 갖는 랜덤변수로 모델링한다. 1차 테일러 전개와 2차 테일러 전개를 통한 해석적 성능분석이 제안된다. 실제 진폭비와 명목상 진폭비의 불일치가 발생한 Cross-eye 재밍의 성능 측정은 mean square difference (MSD)를 계산함으로서 측정된다. 해석적으로 유도된 MSD는 1차 테일러 전개 기반 시뮬레이션 기반 MSD 및 2차 테일러 전개 기반 시뮬레이션 기반 MSD와 해석 기반 MSD와 비교함으로써 검증된다. 계산비용이 높은 Monte-Carlo기반 MSD보다 해석 기반 MSD가 우수함을 보인다.

• Journal of the Korean Data and Information Science Society
• /
• 제25권3호
• /
• pp.643-653
• /
• 2014

In this paper, we propose some estimators for the extreme value distribution based on the interval method and mid-point approximation method from the progressive Type-I interval censored sample. Because log-likelihood function is a non-linear function, we use a Taylor series expansion to derive approximate likelihood equations. We compare the proposed estimators in terms of the mean squared error by using the Monte Carlo simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.282-284
• /
• 2007

The hardening and the constitutive equation based on the crystal plasticity are introduced for the numerical simulation of hemispherical sheet metal forming. For calculating the deformation and the stress of the crystal, Taylor's model of the crystalline aggregate is employed. The hardening is evaluated by using the Taylor factor, the critical resolved shear stress of the slip system, and the sum of the crystallographic shears. During the hemispherical forming process, the texture of the sheet metal is evolved by the plastic deformation of the crystal. By observing the texture evolution of the BCC sheet, the texture evolution of the sheet is traced during the forming process. Deformation texture of the BCC sheet is represented by using the pole figure. The comparison of the strain distribution and punch force in the hemispherical forming process between crystal plasticity and experiment shows the verification of the crystal-based formulation and the accuracy of the hardening and constitutive equation obtained from the crystal plasticity.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.365-372
• /
• 2016

전산유체역학(CFD)을 이용하여 테일러 반응기 내 입자간 응집과 분해반응을 고려한 유동해석을 수행하였다. 입자크기분포를 파악하기 위하여 모멘트 적분법(QMOM)을 이용하여 집합체 균형방정식(Population Balance Equation)을 계산하였다. 초기 여섯 개의 모멘트를 이용하였으며, 응집커널은 Brownian kernel 과 turbulent kernel의 합을, 그리고 분해커널은 멱법칙 커널(power-law kernel)을 사용하였다. 입자의 초기 부피분율에 따른 최종 입자크기를 예측하였다. 그 결과, 초기 부피분율이 증가할수록 입자의 크기와 초기 성장속도가 증가하는 것을 확인하였다.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.11-19
• /
• 2010

A code is developed to simulate incompressible free surface flows using the Roe's flux-difference splitting scheme. An interface of two fluids is considered as a moving contact discontinuity. The continuities of pressure and normal velocity across the interface are enforced by the conservation law in the integral sense. The fluxes are computed using the Roe's flux-difference splitting scheme for two incompressible fluids. The interface can be identified based on the computed density distribution. However, no additional treatment is required along the interface during the whole computations. Complicated time evolution of the interface including topological change can be captured without any difficulties. The developed code is applied to simulate the Rayleigh-Taylor instability of two incompressible fluids in the density ratio of 7.2:1 and the broken dam problem of water-air. The present results are compared with other available results and good agreements are achieved for the both cases.