• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.484-492
• /
• 2018

This study examined the effects of field complexity and type of target objects on the performance in baggage screening task. A total of 62 participants(male: 45.2%, female: 54.8%) participated and their mean age was 22.88. The simulated baggage screening task was developed for this study and after the orientation and task exercises, main experiment session was conducted. Participants performed a total of 200 tasks and 40(20%) contained target object. The complexity was set at three levels: high, middle, and low levels and the number of background items contained 20, 14. and 8 respectively. The type of target was set as gun, knife, liquid, and righter. The dependent variables were hit ratio and reaction time. The results showed that the hit ratio decreased and reaction time increased significantly as field complexity increased, and they varied depending on the type of target. The hit ratio of the knife was the highest and liquid lowest and reaction time of the knife was the fastest and liquid slowest. In addition, the interaction effect was also significant. Knife was not affected by complexity, however, small item such as lighter was most affected by complexity.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.45-61
• /
• 2005

Stance is defined as any state in which the total mass of the body is supported by the feet. In order to maintain stance, the sum of gravito-inertial forces acting on the body must be registered by equal and opposite forces at the region of contact between the organism and the support surface. Balance is controlled by applying forces to the surface of support so as to maintain the body's center of mass vertically above the feet. for a muIti-segment organism, there can be a variety of ways in which balance can be controlled, since movements of different body segments can have similar effects on the control of balance. In general, the organism tends to have a body configuration that is aligned with gravito-inertial force when there are no external forces acting on it. If any segments of the body are not aligned with gravito-inertial force vector, a torque on that segment would tend to move the body's center of mass. The maintenance of postural stability is accomplished in humans by a complex neural control system. This requires organizing integrating and acting upon visual, vestibular, and somatosensory input, providing orientation information to the postural control system. The information necessary to control and coordinate movement is provided by the visual sense of eye position with respect to the surrounding surface layout, the vestibular sense of head orientation in the gravito-inertial space, and the somatic sense of body segment position relative to one another and to the support surface. In this study, perception and action capability was examined from various points of view. The underlying assumption of the study was that the change of postural configuration could be effected by organism, environment and task goal.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.255-261
• /
• 2003

Tunnelling in poor and heterogeneous ground is a difficult task. Even with a good geological investigation, uncertainties with respect to the local rock mass structure will remain. Especially for such conditions, a reliable short-term prediction of the conditions ahead and outside the tunnel profile are of paramount importance for the choice of appropriate excavation and support methods. The information contained in the absolute displacement monitoring data allows a comprehensive evaluation of the displacements and the determination of the behaviour and influence of an anisotropic rock mass. Case histories and with numerical simulations show, that changes in the displacement vector orientation can indicate changing rock mass conditions ahead of the tunnel face (Schubert & Budil 1995, Steindorfer & Schubert 1997). Further research has been conducted to quantify the influence of weak zones on stresses and displacements (Grossauer 2001). Sellner (2000) developed software, which allows predicting displacements (GeoFit$\circledR$). The function parameters describe the time and advance dependent deformation of a tunnel. Routinely applying this method at each measuring section allows determining trends of those parameters. It shows, that the trends of parameter sets indicate changes in the stiffness of the rock mass outside the tunnel in a similar way, as the displacement vector orientation does. Three-dimensional Finite Element simulations of different weakness zone properties, thicknesses, and orientations relative to the tunnel axis were carried out and the function parameters evaluated from the results. The results are compared to monitoring results from alpine tunnels in heterogeneous rock. The good qualitative correlation between trends observed on site and numerical results gives hope that by a routine determination of the function parameters during excavation the prediction of rock mass conditions ahead of the tunnel face can be improved. Implementing the rules developed from experience and simulations into the monitoring data evaluation program allows to automatically issuing information on the expected rock mass quality ahead of the tunnel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5273-5281
• /
• 2015

The purpose of this study is to examine the effects of health related departments' self-efficacy on stress-coping strategies by setting up grade and sex as regulating variables and figure out their mediating effects. To attain the goal, a survey was conducted to 1,442 undergraduates attending S University, and the results went through analysis by using SPSS and AMOS. To sum up the study results, preference of difficult project exerted negative effects on avoidance-centeredness. Self confidence had negative effects on avoidance-centeredness. Self-regulating efficacy indicated positive effects on social support-orientation and problem solving-centeredness while avoidance-centeredness showed negative effects. Regarding effects among self-efficacy's subfactors, confidence, self-regulating efficacy, and preference for task difficulty, and stress-coping strategies' subfactors, social support-orientation, problem solving-centeredness, and avoidance-centeredness, there was difference found in the model by grade, but there was no difference found by sex.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2015

Objective: The aim of this study is to suggest the standard of the direction sign on the pendant switch of overhead cranes which can reduce human errors in control. Background: A great number of crane accidents occur in industries. One of the major causes of the accidents is the mistake in the control of cranes by confusing the orientation of crane movements. Nevertheless, three different direction sign styles, 'East, West, South, North (EWSN)', 'Forward, Backward, Left, Right (FBLR)', and arrows for four directions are used without standardization. Method: An overhead crane simulator was installed for a laboratory experiment. It could move along six directions by the control of a pendant switch. 90 participants were evenly assigned to the three different conditions of direction sign styles. The participants were asked to control the pendant switch according to the continuously appearing 16 direction signs on a monitor ahead. The participants were allowed to refer an orientation sign board on the ceiling representing correct movement directions of the overhead crane simulator. Results: The direction sign style, 'EWSN', showed statistically significant better performance in task completion time and number of errors than the other sign styles. The direction sign style, 'EWSN', adopting the cardinal direction system, made the participants clear in direction controls after customizing to the crane movements. However, the direction sign styles, 'FBLR' and the arrows adopting the relative direction system made conflicts in direction controls due to the egocentric view of human. Conclusion: The direction sign style, 'EWSN', is the most appropriate for the standardization of the direction sign on the pendant switch of overhead cranes. Application: The results of this study can be applied to the standardization of direction sign in the legal notification on the safety certifications of crane manufacturing.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.155-163
• /
• 2013

This study aims to look into what influences a self-growth program has on morality and achievement motivation of adolescents on probation. As a result of the study, it was discovered that after the self-growth program, there was a statistically significant difference in interest in others(altruism) and their social devotion while there was no significant difference in the interest in self and social issues. Also, there was a statistically significant difference in future-orientation, confidence, a sense of responsibility, having a mind to face challenges, and task orientation while there was not a significant difference in having an adventurous mind. The results above indicate that the self-growth program has a significant influence on the morality and achievement motivation in adolescents on probation. Therefore, to enhance the morality and achievement motivation of adolescents, more organized research on self-growth programs is needed and their utilization should be improved.

• Korean Medical Education Review
• /
• v.25 no.2
• /
• pp.159-173
• /
• 2023

The purpose of this study was to develop and validate a competency tool for new nurses and to pilot-test it with new nurses. A Delphi survey was conducted to develop a competency tool, and a self-evaluation was conducted among new nurses who pilot-tested the finally derived competencies. The Delphi survey panel consisted of 18 people, including adjunct professors at the College of Nursing, nursing managers, and nurses with master's degrees. The Delphi survey asked about the validity of the competencies constructed in two rounds. After analyzing the Delphi results with mean, standard deviation, content validity ratio, degrees of convergence, and degrees of consensus, 12 core competencies and 36 enabling competencies were finally derived. The competencies consisted of clinical judgment and management (nine items), task competence (four items), patient orientation (five items), moral value orientation (three items), cooperation (two items), supply management (two items), professional development (three items), confidence (one item), self-control (two items), flexibility (two items), influence (one item), and nurturing others (two items). The finally derived competencies were pilot-tested with 229 new nurses who had worked for 2-12 months. The self-evaluation scores of new nurses were distributed differently according to their working period. In this study, the competencies required for new nurses were identified and the corresponding enabling competencies were identified. In the future, it is expected that a competency-based education program will be prepared based on these findings, and furthermore, it will be possible to provide high-quality medical and nursing services that meet patients' needs by improving the competency of new nurses and lowering the turnover rate.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.124-137
• /
• 1994

Visual features of a mushroom(Lentinus Edodes, L.) are critical in grading and sorting as most agricultural products are. Because of its complex and various visual features, grading and sorting of mushrooms have been done manually by the human expert. To realize the automatic handling and grading of mushrooms in real time, the computer vision system should be utilized and the efficient and robust processing of the camera captured visual information be provided. Since visual features of a mushroom are distributed over the front and back sides, recognizing sides and states of the stalk including the stalk orientation from the captured image is a prime process in the automatic task processing. In this paper, the efficient and robust recognition process identifying the front and back side and the state of the stalk was developed and its performance was compared with other recognition trials. First, recognition was tried based on the rule set up with some experimental heuristics using the quantitative features such as geometry and texture extracted from the segmented mushroom image. And the neural net based learning recognition was done without extracting quantitative features. For network inputs the segmented binary image obtained from the combined type automatic thresholding was tested first. And then the gray valued raw camera image was directly utilized. The state of the stalk seriously affects the measured size of the mushroom cap. When its effect is serious, the stalk should be excluded in mushroom cap sizing. In this paper, the stalk removal process followed by the boundary regeneration of the cap image was also presented. The neural net based gray valued raw image processing showed the successful results for our recognition task. The developed technology through this research may open the new way of the quality inspection and sorting especially for the agricultural products whose visual features are fuzzy and not uniquely defined.

• Korean Journal of Cognitive Science
• /
• v.34 no.3
• /
• pp.153-180
• /
• 2023

Previous research on the action effect had shown how simple action towards a stimulus can enhance the processing of that stimulus in subsequent visual search task (Buttaccio & Hahn, 2011; Weidler & Abrams, 2014). In four experiments, we investigated whether semantic representation of action word can induce the same attentional boost towards that stimulus and whether the type of action performed can modulate the action effect. In experiment 1, we replicated the same experimental paradigm displayed in previous studies. Participants were first shown an action word cue - "go" or "no". When the action cue was "go", participants were to press a designated key, but not to when the action cue was "no". Next, participants performed a visual search task, in which they reported the orientation of a tilted bar. The target could appear on top of the previously shown prime object (valid), or not (invalid). Reaction times (RTs) to the search task were measure for analysis and comparison, and the action effect had been replicated. In experiment 2, participants were instructed to respond with the keyboard for the action task, and to respond with the joystick for the visual search task. In experiment 3, participants were instructed not to press any key on the onset of prime, and then perform the visual search task to isolate the effect of semantic representation. Lastly, in experiment 4, participants were instructed to press separate keys for "go" and "no" on the onset of prime, and then perform the visual search task. Results indicate that semantic representation alone did not modulate the action effect, regardless of type of action and medium of action.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.219-237
• /
• 2017

Looking into the top-five innovative sectors in Korea's manufacturing and service industries, this study empirically analyzes the effect of innovation performance on R&D investment, which is one of the most important strategic decisions for corporate management. In the midst of an uncertain business environment, R&D investment has been regarded as the most important strategic decision making in corporate management related to innovation. Corporate management, however, tend to be reluctant to make sufficient R&D investment due to the risk of an investment failure. Therefore, having R&D investment by offsetting this risk has been deemed as a key task for corporate management. However, prior studies have failed to identify which factors affect companies' strategic decision making on R&D investment. This study is to remedy this weakness of prior study. Relying on path dependency theory at organization-level and dominant logic at individual-level, this study empirically examines the multiple regression model, which sees entrepreneurial orientation as a positive mediator between innovation performance and R&D investment. The results found in the analysis of 242 local companies in the manufacturing and service sectors represent that innovation performance has a direct and positive effect on R&D investment, while it indirectly affects R&D investment through the mediating roles of entrepreneurial orientation. They also revealed that innovation performance had a meaningful impact on entrepreneurial orientation, which is an inclination to seek innovation, led to R&D investment. The founding of this study imply that innovation performance in the past affects innovation strategies in the future, and such a relationship could be strengthened by entrepreneurial orientation as the dominant logic of corporate management.